5365-99-061-3625

Shim

5365990613625 990613625 P3-06/1 P4-02/4 P31-05/2 P31-05 28:2 DIN 988 SST/Y/275/40/A001/000 SHEET 003- 001294603 001294603 SHEET 003 P41-03 28:2 P41-06 28:2 P31-05 28:1 SST/Y/275/40/A001/000 PS22X32X0.1 P31-05/2 ITEM 18 P41-03-28-2-18 S22X32X1.2 101518514 101518 P31-05 28:2 ITEM 18 P4-02/4 ITEM 60 P41-06 28:2 ITEM 18 S22X32X0.1 PS22X32X2 P3-06/1 ITEM 17 P31-05 28:1 ITEM 18

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST. View more Shim