What is Federal Supply Class 5365?

FSC 5365 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5365) in the USA for supply items codified in the category of Bushings, Rings, Shims, and Spacers.

What is NATO Supply Classification Class 5365?

NSC 5365 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5365 in the USA) for supply items codified in the category of Bushings, Rings, Shims, and Spacers.

Which Federal Supply Group is FSC 5365 in?

FSC 5365 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5365 in?

NSC 5365is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Sleeve Bushing?

A Sleeve Bushing (BUSHING,SLEEVE) is a tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.

What is a Plate Spacer?

A Plate Spacer (SPACER,PLATE) is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Bushings, Rings, Shims, and Spacers - Israel (IL)

Federal Supply Class (FSC): 5365

NATO Supply Classification Class (NSC): 5365

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Israel (IL) - NCB is 31

NSN Format for Bushings, Rings, Shims, and Spacers
Codified by Israel

53	65	31	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5365 is a classification within NATO Supply Group 53, which is dedicated to Hardware And Abrasives.

NATO Supply Class 5365 specifically focuses on Bushings, Rings, Shims, And Spacers. Here's a breakdown of what each of these items refers to:

1. Bushings: Bushings are cylindrical components used to reduce friction and wear between two moving parts. They are typically made of metal or plastic and are used to provide a precise fit or alignment.

2. Rings: Rings, in this context, refer to circular components that are used for various purposes. They can be used as seals, retaining devices, or to provide support or reinforcement in mechanical assemblies.

3. Shims: Shims are thin, flat pieces of material that are used to fill gaps or spaces between two surfaces. They are commonly used to adjust the alignment or spacing of components in machinery or equipment.

4. Spacers: Spacers are similar to shims but are typically used to create a specific distance or gap between two components. They can be used to provide proper alignment, prevent damage, or ensure the correct functioning of mechanical assemblies.

In summary, NATO Supply Class 5365 encompasses a range of components such as bushings, rings, shims, and spacers that are used in various applications within the Hardware And Abrasives industry.

FSC 5365 Bushings, Rings, Shims, and Spacers - Israel (IL)

Includes Externally Threaded Rings; Keyed and Serrated Lock Rings; Dee Rings; Instrument Retaining Rings; Shim Sets and Assortments; Plate Spacers; Ring Spacers; Sleeve Spacers; Stepped Spacers; Spacer Sets and Assortments; Sleeve Bushings; Machine Threaded Bushings; Machine Threaded Plugs.

Excludes Sleeve Bearings (FSC 3120); Pipe Threaded Plugs (FSC 4730); Piston Rings (FSC 2520, 2805, 2810, 2815, 2825, 2990, 3040, 4310, and 4820); Retaining Rings (FSC 5325); Shim Stock (FSC 9515).

Frequently Asked Questions(FAQ) for Federal Supply Class 5365

What is Federal Supply Class 5365?: FSC 5365 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5365) in the USA for supply items codified in the category of Bushings, Rings, Shims, and Spacers.
What is NATO Supply Classification Class 5365?: NSC 5365 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5365 in the USA) for supply items codified in the category of Bushings, Rings, Shims, and Spacers.
Which Federal Supply Group is FSC 5365 in?: FSC 5365 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5365 in?: NSC 5365 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5365

What is a Sleeve Bushing? 20 Items: A Sleeve Bushing (BUSHING,SLEEVE) is a tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.
What is a Plate Spacer? 10 Items: A Plate Spacer (SPACER,PLATE) is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.