5365-14-528-3395

| DAC: 1 21 Mar 1990 5950-14-447-0173 Coil Form 130017RNCC: 5 | RNVC: 2 | DAC: 4 25 Apr 1991 5365-14-528-3395

3 2 Jul 2007 5365-14-451-7592 Positioning Guide A4045-2RNCC: 5 | RNVC: 2 | DAC: 4 4 Dec 1991 5365-14-528-3395

5845-99-419-4589 5845994194589 994194589 SPRING,RIGHT HAND

5305-99-134-6615 5305991346615 991346615 is an externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.

3120-99-558-5194 3120995585194 995585194 is a tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. it must have a visible or detectable means of lubrication or be self-lubricated. the over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. see also bushing, sleeve; spacer, sleeve; and washer (as modified). excludes pin, hollow.