What is Federal Supply Class 5365?

FSC 5365 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5365) in the USA for supply items codified in the category of Bushings, Rings, Shims, and Spacers.

What is NATO Supply Classification Class 5365?

NSC 5365 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5365 in the USA) for supply items codified in the category of Bushings, Rings, Shims, and Spacers.

Which Federal Supply Group is FSC 5365 in?

FSC 5365 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5365 in?

NSC 5365is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

A Shim is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.

What is a Ring Spacer?

A Ring Spacer (SPACER,RING) is a circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE; INSULATOR WASHER; and SHIM. See also SPACER, PLATE and SPACER, SLEEVE.

Bushings, Rings, Shims, and Spacers - Czechia (CZ)

Federal Supply Class (FSC): 5365

NATO Supply Classification Class (NSC): 5365

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Czechia (CZ) - NCB is 16

NSN Format for Bushings, Rings, Shims, and Spacers
Codified by Czechia

53	65	16	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5365 is a classification within NATO Supply Group 53, which is dedicated to Hardware And Abrasives.

NATO Supply Class 5365 specifically focuses on Bushings, Rings, Shims, And Spacers. Here's a breakdown of what each of these items refers to:

1. Bushings: Bushings are cylindrical components used to reduce friction and wear between two moving parts. They are typically made of metal or plastic and are used to provide a precise fit or alignment.

2. Rings: Rings, in this context, refer to circular components that are used for various purposes. They can be used as seals, retaining devices, or to provide support or reinforcement in mechanical assemblies.

3. Shims: Shims are thin, flat pieces of material that are used to fill gaps or spaces between two surfaces. They are commonly used to adjust the alignment or spacing of components in machinery or equipment.

4. Spacers: Spacers are similar to shims but are typically used to create a specific distance or gap between two components. They can be used to provide proper alignment, prevent damage, or ensure the correct functioning of mechanical assemblies.

In summary, NATO Supply Class 5365 encompasses a range of components such as bushings, rings, shims, and spacers that are used in various applications within the Hardware And Abrasives industry.

FSC 5365 Bushings, Rings, Shims, and Spacers - Czechia (CZ)

Includes Externally Threaded Rings; Keyed and Serrated Lock Rings; Dee Rings; Instrument Retaining Rings; Shim Sets and Assortments; Plate Spacers; Ring Spacers; Sleeve Spacers; Stepped Spacers; Spacer Sets and Assortments; Sleeve Bushings; Machine Threaded Bushings; Machine Threaded Plugs.

Excludes Sleeve Bearings (FSC 3120); Pipe Threaded Plugs (FSC 4730); Piston Rings (FSC 2520, 2805, 2810, 2815, 2825, 2990, 3040, 4310, and 4820); Retaining Rings (FSC 5325); Shim Stock (FSC 9515).

Frequently Asked Questions(FAQ) for Federal Supply Class 5365

What is Federal Supply Class 5365?: FSC 5365 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5365) in the USA for supply items codified in the category of Bushings, Rings, Shims, and Spacers.
What is NATO Supply Classification Class 5365?: NSC 5365 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5365 in the USA) for supply items codified in the category of Bushings, Rings, Shims, and Spacers.
Which Federal Supply Group is FSC 5365 in?: FSC 5365 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5365 in?: NSC 5365 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5365

What is a Machine Thread Plug? 12 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Shim? 37 Items: A Shim is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
What is a Ring Spacer? 20 Items: A Ring Spacer (SPACER,RING) is a circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE; INSULATOR WASHER; and SHIM. See also SPACER, PLATE and SPACER, SLEEVE.