5360-00-109-7758

5998-99-648-1300 5998996481300 996481300 is a printed wiring board having only printed electronic components, such as capacitors, resistors, and the like. for items having a complete individual electrical/electronic function, use applicable item name, such as amplifier (as modified); power supply; or the like. for items not having a complete individual electrical/electronic function, see applicable "subassembly" name, such as amplifier subassembly; power supply subassembly; or the like. for items having separately manufactured components (other than plug-in connecting facilities) and not having a more specific item name, see circuit card assembly.

5950-00-648-1300 5950006481300 006481300 is an item consisting of a partial turn as one or more turns of wire or other conductive material which constitutes one continuous untapped winding. it may be wound or formed in other than a circular manner and may be self-supporting, requiring no coil form. it is specifically designed to furnish inductive reactance in a circuit carrying radio frequency current ranging from 20 kilohertz (kilocycles) and above. it may include tuning devices, integral resistors and capacitors; however, excludes filter (as modified). the coil has only two electrical terminals. for items having tapped winding or more than one winding - see transformer, radio frequency. for coils wound on resistors, which are designed to be inserted in the circuit of a radio frequency stage to suppress high frequency parasitic oscillations, see suppressor, parasitic.

5310-01-648-1300 5310016481300 016481300 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

: 2 | DAC: 4 11 Jun 1997 5330-00-109-7838 Gasket 32985YRNCC: 3 | RNVC: 2 | DAC: 5 2 Aug 1968 5360-00-109-7758