5360-25-160-8636
Extension Helical Spring
5360251608636 251608636 3529 02881270 M1181-237001
An open-or close-coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, so designed to provide resistance to pulling forces. The close-coiled springs may incorporate the special feature of initial tension created between the coils when wound so that an initial load must be applied to separate them. Excludes SPRING, REINFORCING, HOSE. View more Extension Helical Spring
Managed by Norway
NSN Created on 6 Mar 2012
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 5360-25-160-8636
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 5360-25-160-8636 5+ Documents (More...)
Spring SF-DF O.6X8X40RNCC: 3 | RNVC: 2 | DAC: 9SFDF06X8X40RNCC: 3 | RNVC: 2 | DAC: 9 18 Sep 2002 5360-25-160-8636
Mar 2012 4720-25-160-2489 Nonmetallic Hose M1027-532021RNCC: 6 | RNVC: 9 | DAC: 9 27 May 2009 5360-25-160-8636
Request a Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 3529
NS Request Quotation Subscribe to View Vendor Details... 35-29 DIAL,LATHE 9 EA NS Request Quotation 3529
DIAL,LATHE 400 EA NS Request Quotation Subscribe to View Vendor Details... 3529 DIAL,LATHE 2000 EA NS
NS Request Quotation Subscribe to View Vendor Details... 35-29 DIAL,LATHE 9 EA NS Request Quotation 3529
DIAL,LATHE 400 EA NS Request Quotation Subscribe to View Vendor Details... 3529 DIAL,LATHE 2000 EA NS
7520-66-149-4415 7520661494415 661494415 is an item which is used for writing, drawing, and freehand marking on various types of material. it may be initially filled with ink and may be designed to be refilled. the marking tips are of varying shapes and materials and the inks are of varying colors and types. excludes ball point pen; marker assortment, tube type; and pen, plastic tip.
5365-27-025-9442 5365270259442 270259442 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Restrictions 5360-25-160-8636
End Users 5360-25-160-8636
- Sweden (VK)
Approved Sources 5360-25-160-8636
- Part Number
- Manufacturer
- Status
- 3529
- Manufacturer
- S7048 - Lesjofors Stockholms Fjader Ab (Replaced)
- Primary Buy
- Primary Buy
- 02881270
- S3712 - Bae Systems Bofors Ab (Replaced)
- Secondary Buy
- Secondary Buy
- M1181-237001
- SZ003 - Fmv, Swedish Defence Materiel (Replaced)
- NATO Reference
- NATO Reference
NATO Stock Numbers Related to 5360-25-160-8636
5360-27-015-5616 5360-15-060-8062 5360-14-490-6072 5360-27-015-9869 5360-15-053-8856 5360-15-059-9695 5360-12-307-4330 5360-15-004-1533 5360-25-106-6960 5360-99-101-4173 5360-99-143-1005 5360-27-018-7867 5360-15-051-5015 5360-15-062-4015 5360-33-105-9685 5360-12-369-9042 5360-99-466-3747 5360-21-911-9515