5360-15-005-2095
Compression Helical Spring
5360150052095 150052095 6152572
An open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. Excludes springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and SPRING, REINFORCING, HOSE. View more Compression Helical Spring
Managed by Italy
NSN Created on 16 Sep 1980
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 5360-15-005-2095
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 5360-15-005-2095 5+ Documents (More...)
Documents 5905-00-615-2572 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5360/it 5360-15-005-2095
Compression Helical Spring 5360150052095 valve, graphite impregnated and lubricated items. https
us 5905-00-615-2572 59050061525720061525725905-00-615-25725905006152572006152572 Restrictions 5360-15-005-2095
Compression Helical Spring 5360150052095 valve, graphite impregnated and lubricated items. https
us 5905-00-615-2572 59050061525720061525725905-00-615-25725905006152572006152572 Restrictions 5360-15-005-2095
4140-22-615-2572 4140226152572 226152572 is a nonpositive displacement mechanical device with guide vanes and having an axial fan impeller(s) inclosed within a tubular housing. it is designed primarily for duct installation to move air or gas axially over a wide range of volumes and pressures.
5310-01-615-2572 5310016152572 016152572 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
1560-99-615-2572 1560996152572 996152572
4140-22-125-6544 4140221256544 221256544 is a nonpositive displacement mechanical device with guide vanes and having an axial fan impeller(s) inclosed within a tubular housing. it is designed primarily for duct installation to move air or gas axially over a wide range of volumes and pressures.
Restrictions 5360-15-005-2095
End Users 5360-15-005-2095
- Oman (VE)
- Argentina (YF)
- France (ZF)
- Italy (ZR)
- Greece (ZU)
- Turkey (ZW)
Approved Sources 5360-15-005-2095
- Part Number
- Manufacturer
- Status
- 6152572
- Manufacturer
- A1140 - Leonardo Spa Divisione Sistemi Di (Active)
- Primary Buy
- Primary Buy
NATO Stock Numbers Related to 5360-15-005-2095
5360-99-891-0856 5360-27-034-9003 5360-22-127-1332 5360-12-333-3088 5360-99-463-1580 5360-14-531-8911 5360-14-316-7017 5360-27-019-2863 5360-14-293-6568 5360-14-232-9640 5360-99-967-4569 5360-99-542-3068 5360-99-763-1412 5360-12-335-5536 5360-14-562-4876 5360-15-150-4028 5360-99-600-8244 5360-66-140-5091