5360-14-205-5100

Washer 5330-21-107-8930 Flat Washer 5310-99-075-3286 Flat Washer 4910-21-106-0352 Flat Washer 5360-14-205-5100

5510-00-220-1420 5510002201420 002201420

5340-12-173-9598 5340121739598 121739598 is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. this item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. the item may have a center hole and/or bolt holes. excludes cup, hydraulic brake cylinder.

5365-12-305-0654 5365123050654 123050654 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.