5360-12-323-9332

9905-37-520-1288 9905375201288 375201288 is an item which is rigid or semi-rigid, generally flat and smooth designed to be attached to an item and provides data such as name/nomenclature, weight, tire pressure, dimensional data and the like. see also marker,identification; plate,designation; plate,instruction; plate set,identification; and tag,marker. excludes label.

Push Button 023095RNCC: 3 | RNVC: 2 | DAC: 5242-44030RNCC: 5 | RNVC: 2 | DAC: 1 30 May 1969 5360-12-323-9332

5995-14-544-7753 5995145447753 145447753 is a definite length of cable, radio frequency having one or both ends processed and/or terminated in fittings which provide for connection to other items. includes multiple cable assemblies in a common jacket or shield. excludes items having branches or forks and lead, test. see also cable assembly, radio frequency, branched.

3120-00-052-6633 3120000526633 000526633 is a tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. it must have a visible or detectable means of lubrication or be self-lubricated. the over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. see also bushing, sleeve; spacer, sleeve; and washer (as modified). excludes pin, hollow.

5365-99-613-0196 5365996130196 996130196 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.