Premium Information is available for this item - Upgrade for $1 a day
5355-01-150-9801
Knob
5355011509801 011509801 NASM21384 MS21384-02DNN
An item designed to transmit manual, rotary or linear motion to other devices. May include detachable or nondetachable stud (shaft), pointer, or skirt. It may have reference markings in the form of dots, arrows, hairlines, and/or symbols which may be used in conjunction with a calibrated panel, vernier indicator, and the like to indicate the position or motion of items. For items having spokes or simulated spokes radiating from near the center to near the outside rim of the item and relatively thin round disk-shaped items 3 inches (76.2 mm) in diameter or over, see HANDWHEEL. For items calibrated in units or series of divisions to denote relative positioning of devices see DIAL, CONTROL. Excludes DOORKNOB; and HANDLE (as modified). View more Knob
November 2023
5
Marketplace 5355-01-150-9801
Request a Quotation from participating marketplace vendors
Related Documents 5355-01-150-9801 5+ Documents (More...)
/fsg-53/fsc-5355/us
/fsg-53/fsc-5355/us 5355-01-150-9801 Knob 5355011509801011509801,NASM21384 NASM21384MS21384-02DNN An
https//www.nsnlookup.com /fsg-53/fsc-5355/us 5355-01-150-9801 Knob 5355011509801011509801,NASM21384
/fsg-53/fsc-5355/us
//www.nsnlookup.com /fsg-53/fsc-5355/us 5355-01-150-9801 Knob 5355011509801 011509801,NASM21384 - Upgrade
for $1 a day Upgrade your Account Upgrade 5355-01-150-9801Knob5355011509801 011509801 NASM21384 https
/fsg-53/fsc-5355/us
https//www.nsnlookup.com /fsg-53/fsc-5355/us 5355-01-216-9079 Knob 5355012169079 012169079,NASM21384
//www.nsnlookup.com /fsg-53/fsc-5355/us 5355-01-378-0791 Knob 5355013780791 013780791,NASM21384 NASM21384
/fsg-53/fsc-5355/us
NASM21384-04ABC MS21384-04ABC An item designed to transmit manual, rotary or linear motion to other
https//www.nsnlookup.com /fsg-53/fsc-5355/us 5355-01-150-9801 Knob 5355011509801 011509801,NASM21384
/fsg-53/fsc-5355/us
//www.nsnlookup.com /fsg-53/fsc-5355/us 5355-01-387-4945 Knob 5355013874945 013874945,NASM21384 NASM21384
Knob 5355011509801 011509801,NASM21384 //www.nsnlookup.com /fsg-53/fsc-5355/us 5355-01-212-2333
Restrictions 5355-01-150-9801
5355-01-150-9801 is a Knob that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5355-01-150-9801
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5355-01-150-9801
- US Air Force (FXGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Apr 2006
- Supplementary Collaborators:
- KE
Approved Sources 5355-01-150-9801
- Part Number
- Manufacturer
- Status
- NASM21384
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Incomplete Reference
- Incomplete Reference
- MS21384-02DNN
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- MS21384-02DNN
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5355-01-150-9801
- Characteristic
- Specifications
- FIIG
- Specifications
- A530M0
- Distance From Hole Center To Knob/Skirt Base [ABFU]
- 0.310 Inches Nominal
- Attachment Method [ABSX]
- Setscrews
- Gripping Surface Condition [ABHG]
- Smooth
- Material Transparency [AJQE]
- Clear
- Nominal Thread Size [CQJX]
- 0.112 Inches Screw Hole
- Inside Diameter [AARX]
- 0.126 Inches Minimum And 0.128 Inches Maximum
- Inside Width [ADJT]
- 0.106 Inches Minimum And 0.110 Inches Maximum
- Length [ABRY]
- 1.130 Inches Nominal
- Pointer Design [CSKT]
- Nondetachable
- Reference Marking [ABSP]
- Index Line
- Screw Drive Type [CBSC]
- Hexagon Socket
- Setscrew Hole Quantity [ABFR]
- 2
- Shaft Accommodation Style [ABHH]
- Flatted One Side
- Skirt Design [CRWX]
- Nondetachable
- Skirt Outside Diameter [CRPJ]
- 1.130 Inches Nominal
- Skirt Style [ABSL]
- Flared
- Overall Depth [ABFY]
- 0.620 Inches Maximum
- Overall Thickness [ADUM]
- 0.750 Inches Nominal
- Special Features [FEAT]
- Reference Marking Is A Black Indicia Border With White Line
- Width [ABGL]
- 0.620 Inches Nominal
- Style Designator [STYL]
- Bar With Single Pointer
- Thread Series Designator [THSD]
- Unc Screw Hole
- Thread Quantity Per Inch [CMLP]
- 32 Screw Hole
Weapon Systems (WSDC) 5355-01-150-9801
DLA Procurement Analysis 5355-01-150-9801
- Last Stock Position:
- 8 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5355-01-150-9801
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5355-01-150-9801
Freight Information 5355-01-150-9801
5355-01-150-9801 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 108590. A Sub NMFC of X. It has a NMFC Description of KNOBS/PULLS DOOR/DRAWER NOI. 5355-01-150-9801 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55550 which rates the freight between FCL and LCL. 5355-01-150-9801 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5355-01-150-9801 is not classified as a special type of cargo when transported by water. 5355-01-150-9801 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5355-01-150-9801
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5355-01-150-9801 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: