Premium Information is available for this item - Upgrade for $1 a day
5355-01-031-1494
Knob
5355010311494 010311494 NASM21385 MS21385-24 MS21385-04FNN
An item designed to transmit manual, rotary or linear motion to other devices. May include detachable or nondetachable stud (shaft), pointer, or skirt. It may have reference markings in the form of dots, arrows, hairlines, and/or symbols which may be used in conjunction with a calibrated panel, vernier indicator, and the like to indicate the position or motion of items. For items having spokes or simulated spokes radiating from near the center to near the outside rim of the item and relatively thin round disk-shaped items 3 inches (76.2 mm) in diameter or over, see HANDWHEEL. For items calibrated in units or series of divisions to denote relative positioning of devices see DIAL, CONTROL. Excludes DOORKNOB; and HANDLE (as modified). View more Knob
November 2023
5
Marketplace 5355-01-031-1494
Request a Quotation from participating marketplace vendors
Related Documents 5355-01-031-1494 5+ Documents (More...)
/fsg-53/fsc-5355/us
(Identification) 1/3 NSN 5355-01-031-1494 (Identification) 2/3 NSN 5355-01-031-1494 (Identification
MS21385-04FNN KNOB 7 EA NS Request Quotation FedMall Updated Every 15 Minutes 5355-01-031-1494 BUY NE
/fsg-53/fsc-5355/us
https//www.nsnlookup.com /fsg-53/fsc-5355/us 5355-01-311-8748 Knob 5355013118748 013118748,NASM21385
https//www.nsnlookup.com /fsg-53/fsc-5355/us 5355-01-336-2678 Knob 5355013362678 013362678,NASM21385
/fsg-53/fsc-5355/us
Knob 5355010311494 010311494,NASM21385 NASM21385-04CGN MS21385-04CGN An item designed to transmit
manual, rotary or linear motion to other NASM21385-04CGN MS21385-04CGN An item designed to transmit
/fsg-53/fsc-5355/us
Knob 5355010311494 010311494,NASM21385 MS21385-24 MS21385-04FNN An item designed to transmit manual
, rotary or linear motion to other devices NASM21385-04CGN MS21385-04CGN An item designed to transmit
/fsg-53/fsc-5355/us
Knob 5355010311494 010311494,NASM21385MS21385-24 MS21385-04FNN NumberManufacturerStatusNASM21385
linear https//www.nsnlookup.com /fsg-53/fsc-5355/us 5355-01-473-5814 Knob 5355014735814 014735814,NASM21385
Restrictions 5355-01-031-1494
5355-01-031-1494 is a Knob that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5355-01-031-1494
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5355-01-031-1494
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5355-01-031-1494
- Part Number
- Manufacturer
- Status
- NASM21385
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Incomplete Reference
- Incomplete Reference
- MS21385-04FNN
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- MS21385-24
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MS21385-04FNN
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5355-01-031-1494
- Characteristic
- Specifications
- FIIG
- Specifications
- A530M0
- Distance From Hole Center To Knob/Skirt Base [ABFU]
- 0.310 Inches Nominal
- Attachment Method [ABSX]
- Setscrews
- Color [HUES]
- Gray, Fed Std 595, 36231
- Gripping Surface Condition [ABHG]
- Smooth
- Material [MATT]
- Plastic Or Aluminum Alloy
- Nominal Thread Size [CQJX]
- 0.164 Inches Screw Hole
- Inside Diameter [AARX]
- 0.252 Inches Minimum And 0.254 Inches Maximum
- Inside Width [ADJT]
- 0.222 Inches Minimum And 0.224 Inches Maximum
- Reference Marking [ABSP]
- Arrow
- Screw Drive Type [CBSC]
- Hexagon Socket
- Setscrew Hole Quantity [ABFR]
- 2
- Shaft Accommodation Style [ABHH]
- Flatted One Side
- Skirt Design [CRWX]
- Nondetachable
- Skirt Outside Diameter [CRPJ]
- 0.880 Inches Nominal
- Skirt Style [ABSL]
- Flared
- Special Features [FEAT]
- 0.380 In. Counterbore Diameter,0.160 In. Counterbore Depth. Illuminated Knob
- Overall Depth [ABFY]
- 0.620 Inches Nominal
- Overall Thickness [ADUM]
- 0.750 Inches Nominal
- Width Across Flats [ASDB]
- 0.770 Inches Nominal
- Style Designator [STYL]
- Hexagon
- Thread Quantity Per Inch [CMLP]
- 32 Screw Hole
- Thread Series Designator [THSD]
- Unc Screw Hole
DLA Procurement Analysis 5355-01-031-1494
Management Data 5355-01-031-1494
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5355-01-031-1494
Freight Information 5355-01-031-1494
5355-01-031-1494 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 108590. A Sub NMFC of X. It has a NMFC Description of KNOBS/PULLS DOOR/DRAWER NOI. 5355-01-031-1494 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 55550 which rates the freight between FCL and LCL. 5355-01-031-1494 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5355-01-031-1494 is not classified as a special type of cargo when transported by water. 5355-01-031-1494 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5355-01-031-1494
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Non-Metallic Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- A-A-1249, Paper, Tissue
- --
- --
- MIL-DTL-117, Type III, Class B, Style 2, Heavy Duty, Waterproof, Transparent Bag
- No special marking
- A-A-1249, Paper, Tissue
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5355-01-031-1494 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: