5355-00-735-6717

DAC: 4 1 Jan 1963 5355-00-738-6187 Scale Dial 2315673G2RNCC: 3 | RNVC: 1 | DAC: 1 1 Jan 1961 5355-00-735-6717

5985-00-165-3287 5985001653287 001653287 is a device for reducing the strength of an alternating current signal by a fixed or predetermined amount, without causing appreciable signal distortion, by maintaining correct impedance match.

5935-12-165-3287 5935121653287 121653287 is two or more connector, plug, electrical; connector, receptacle, electrical; adapter, connector; jack, telephone; jack, tip; plug, telephone; plug, tip; dummy connector, plug; or dummy connector, receptacle in any combination, having a common mounting or mounted on each other, each one capable of being independently replaced. it may be interconnected by means of wire or solder bridgings. for items furnished as mated pairs or sets, see connector set, electrical. excludes dummy connector set, electrical; jack assembly, telephone; jack assembly, tip; plug assembly, tip; and cable assembly (as modified).

5306-01-165-3287 5306011653287 011653287 is a high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.