Premium Information is available for this item - Upgrade for $1 a day
5355-00-519-7480
Scale Dial
5355005197480 005197480 2206X03-1
A dial designed to be read in conjunction with a vernier indicator, pointer(s) or like instruments, which device is not an integral part of the item. The item does not have facilities for connection to a tuning or selection mechanism to position the mechanism. However, it may be designed to be mounted on a knob used to position the mechanism. Excludes SCALEPLATE, ELECTRICAL METER. See also DIAL, CONTROL. View more Scale Dial
May 2023
17
Marketplace 5355-00-519-7480
Request a Quotation from participating marketplace vendors
Related Documents 5355-00-519-7480 1+ Documents (More...)
RQST NE Updated Every Day 5355-00-519-7480 RQST Updated Every Day 5355-00-519-7480 RQST NE Related
Documents 5355-00-519-7480 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5355/us 5355
Restrictions 5355-00-519-7480
5355-00-519-7480 is a Scale Dial that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5355-00-519-7480
- US Army (A920)
- Effective Date:
- 1 Mar 2005
- Former MOE Rule:
- A186
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2005
- Former MOE Rule:
- FXKZ
- Spain (YB01)
- Effective Date:
- 1 May 1997
- Republic of Korea (ZH01)
- Effective Date:
- 1 Aug 1995
- Greece (ZU01)
- Effective Date:
- 1 Apr 2008
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 5355-00-519-7480
- Part Number
- Manufacturer
- Status
- 2206X03-1
- Manufacturer
- 89944 - Elbitamerica, Inc. (Active)
- Primary Buy
- Primary Buy
Datasheet 5355-00-519-7480
- Characteristic
- Specifications
- FIIG
- Specifications
- A530L0
- Attachment Method [ABSX]
- Hole
- Outside Diameter [ABKV]
- 2.812 Inches Nominal
- Scale Division Quantity [ABWG]
- 50 Single Scale
- Scale Type [ATEQ]
- Linear Single Scale
DLA Procurement Analysis 5355-00-519-7480
Management Data 5355-00-519-7480
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- NT
- AIRCRAFT INSTRUMENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5355-00-519-7480
Freight Information 5355-00-519-7480
5355-00-519-7480 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 139600. A Sub NMFC of B. It has a NMFC Description of NAMEPLATES/ESCUTCHN/LTR PLATES SUB2. 5355-00-519-7480 is rated as class 100 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50350 which rates the freight between FCL and LCL. 5355-00-519-7480 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5355-00-519-7480 is not classified as a special type of cargo when transported by water. 5355-00-519-7480 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5355-00-519-7480 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: