5355-00-054-4305

... https//www.nsnlookup.com /cage Lockheed Martin Corp (CAGE Code 56232) DAC: 1 20 May 1967 5355-00-054-4305

Pointer 5 May 1971 5355-00-065-5078 Dial Pointer 21-1415RNCC: 3 | RNVC: 2 | DAC: 1 5 Jul 1967 5355-00-054-4305

25 May 1967 1285-00-053-3521 Arm And Stud Subass 96-027RNCC: 5 | RNVC: 2 | DAC: 1 20 May 1967 5355-00-054-4305

2920-15-122-6222 2920151226222 151226222 GENERATORE

5310-12-122-6222 5310121226222 121226222 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.