Premium Information is available for this item - Upgrade for $1 a day
5342-01-109-7886
Weapon System Resilient Mount
5342011097886 011097886 510-5-N-C 836-0107C3011-15
An item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for a weapon system component to be isolated. Excludes MOUNT, RESILIENT, UTILITY; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dash-pots, grommets, and shock pads. View more Weapon System Resilient Mount
May 2023
7
Marketplace 5342-01-109-7886
Request a Quotation from participating marketplace vendors
Related Documents 5342-01-109-7886 2+ Documents (More...)
Restrictions 5342-01-109-7886
5342-01-109-7886 is a Weapon System Resilient Mount that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5342-01-109-7886
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5342-01-109-7886
- US Air Force (FXGG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- FXCX
Approved Sources 5342-01-109-7886
- Part Number
- Manufacturer
- Status
- 510-5-N-C
- Manufacturer
- 81860 - Hutchinson Aerospace & Industry, (Active)
- Primary Buy
- Primary Buy
- 836-0107C3011-15
- 55683 - Wheeler Fleet Solutions, Co. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5342-01-109-7886
- Characteristic
- Specifications
- FIIG
- Specifications
- A535S0
- Distance From Flange To End [BXCD]
- 1.180 Inches Nominal
- Distance Between Mounting Hole Centers [AFQM]
- 4.250 Inches Nominal
- Flange Length [AFQN]
- 5.250 Inches Nominal
- Flange Mounting Hole Diameter [BXCQ]
- 0.406 Inches Nominal
- Flange Thickness [ABKU]
- 0.150 Inches Nominal
- Flange Width [AGFF]
- 3.250 Inches Nominal
- Height [HGTH]
- 2.250 Inches Nominal
- Material [MATT]
- Steel Core
- Material [MATT]
- Steel Flange
- Material [MATT]
- Steel Housing
- Maximum Load Rating [AYXK]
- 1020.0 Pounds
- Inside Diameter [AARX]
- 0.667 Inches Minimum And 0.707 Inches Maximum
- Style Designator [STYL]
- Round W/Flanged Bushing Two-Hole Flange
- Surface Treatment [SFTT]
- Cadmium Core
- Surface Treatment [SFTT]
- Cadmium Flange
- Surface Treatment [SFTT]
- Cadmium Housing
DLA Procurement Analysis 5342-01-109-7886
Management Data 5342-01-109-7886
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5342-01-109-7886
Freight Information 5342-01-109-7886
5342-01-109-7886 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093600. A Sub NMFC of X. It has a NMFC Description of BRACKETS/BUSHINGS/JOINTS/MOUNTS ETC. 5342-01-109-7886 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49780 which rates the freight between FCL and LCL. 5342-01-109-7886 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5342-01-109-7886 is not classified as a special type of cargo when transported by water. 5342-01-109-7886 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5342-01-109-7886
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5342-01-109-7886 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: