Premium Information is available for this item - Upgrade for $1 a day
5342-00-985-6583
Grooved Clamp Coupling
5342009856583 009856583 57464-688BR 57464-838BR 5H14-3-838-1 8145A4M-838Z 57464-838 MS27114-25BR AS5355/1 AS5355/1-25BR
A metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER. View more Grooved Clamp Coupling
August 2023
15
Marketplace 5342-00-985-6583
Request a Quotation from participating marketplace vendors
Related Documents 5342-00-985-6583 5+ Documents (More...)
AS5355/1 COUPLING,CLAMP,GROOVED 478 EA NS Request Quotation FedMall Updated Every 15 Minutes 5342-00-
... ) https//www.nsnlookup.com /fsg-53/fsc-5342/us 5342-00-985-6583 Grooved Clamp Coupling 5342009856583
AS5355/1 COUPLING,CLAMP,GROOVED 478 EA NS Request Quotation Updated Every Day 5340-00-828-4775 RQST NE
https//www.nsnlookup.com /fsg-53/fsc-5342/us 5342-00-985-6583 Grooved Clamp Coupling 5342009856583
AS5355/1-17R 9447 000 900 495 MS27114-17R 9447-00-0000-500 PC 9 A metal loop having either a V or
AS5355/1 COUPLING,CLAMP,GROOVED 478 EA NS Request Quotation FedMall Updated Every 15 Minutes 5342-01-
AS5355/1-09R 6132A4M-288-Z MIL-DTL-27536/1-09R QS5355 MS27114-09R A metal loop having either a V or
Assembly 1680010592822 010592822 NS Request Quotation FedMall Updated Every 15 Minutes 5342-00- AS5355/1
5H14-3-838-1 8145A4M-838Z 57464-838 MS27114-25BR AS5355/1 AS5355/1-25BR A metal loop https//www.nsnlookup.com
Restrictions 5342-00-985-6583
5342-00-985-6583 is a Grooved Clamp Coupling that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5342-00-985-6583
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5342-00-985-6583
- US Air Force (FXGG)
- Effective Date:
- 1 May 2005
- Former MOE Rule:
- FXCX
- US Navy (N9BG)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
Approved Sources 5342-00-985-6583
- Part Number
- Manufacturer
- Status
- MS27114-25BR
- Manufacturer
- 96906 - Military Standards (Active)
- Definitive Standard
- Definitive Standard
- 57464-688BR
- 00624 - Eaton Aeroquip Llc (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 57464-838BR
- 00624 - Eaton Aeroquip Llc (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 5H14-3-838-1
- 89135 - Emeco Industries, Inc (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- AS5355/1
- 0U583 - Sae International (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- AS5355/1-25BR
- 0U583 - Sae International (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 8145A4M-838Z
- 14242 - Voss Industries, Llc (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 57464-838
- 00624 - Eaton Aeroquip Llc (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- AS5355/1
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- AS5355/1-25BR
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5342-00-985-6583
- Characteristic
- Specifications
- FIIG
- Specifications
- A25400
- Band Thickness [ALED]
- 0.040 Inches Nominal
- Band Width [ALEE]
- 0.750 Inches Nominal
- Cross-Sectional Shape Style [AAGR]
- Grooved Retainer
- Height [HGTH]
- 0.271 Inches Minimum And 0.291 Inches Maximum
- Nut Type [ALDS]
- Self-Locking Hexagon
- Included Angle In Deg [AKZZ]
- 40.0
- Inside Diameter [AARX]
- 8.380 Inches Nominal
- Latch Style [AGPR]
- Single
- Material And Location [ANNQ]
- Steel, Corrosion Resisting Bolt
- Material And Location [ANNQ]
- Steel, Corrosion Resisting Nut
- Material And Location [ANNQ]
- Steel, Mil-S-5059, Type 301, 1/4 Hard Band
- Material And Location [ANNQ]
- Steel, Mil-S-6721, Comp Ti Segment
- Retainer Thickness [ADTJ]
- 0.063 Inches Nominal
- Retainer Width [ALEB]
- 0.750 Inches Nominal
- Root Width [ALEC]
- 0.207 Inches Nominal
- Sealing Inner Liner [ALDW]
- Not Included
- Segment Quantity [ALDT]
- 3
- Shape [SHPE]
- Round
DLA Procurement Analysis 5342-00-985-6583
Management Data 5342-00-985-6583
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5342-00-985-6583
Freight Information 5342-00-985-6583
5342-00-985-6583 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of J. It has a NMFC Description of HARDWARE, NOI SUB 9. 5342-00-985-6583 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5342-00-985-6583 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5342-00-985-6583 is not classified as a special type of cargo when transported by water. 5342-00-985-6583 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5342-00-985-6583
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Contracting Technical Data File (CTDF) 5342-00-985-6583 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: