Premium Information is available for this item - Upgrade for $1 a day
5342-00-541-7585
Protection Bellows
5342005417585 005417585 26-3790
A nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like. View more Protection Bellows
November 2023
6
Marketplace 5342-00-541-7585
Request a Quotation from participating marketplace vendors
Related Documents 5342-00-541-7585 1+ Documents (More...)
Restrictions 5342-00-541-7585
5342-00-541-7585 is a Protection Bellows that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5342-00-541-7585
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5342-00-541-7585
- US Air Force (FXGG)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- FXCX
- US Marine Corps (MC41)
- Effective Date:
- 1 Oct 2010
Approved Sources 5342-00-541-7585
- Part Number
- Manufacturer
- Status
- 26-3790
- Manufacturer
- 82918 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
- 26-3790
- 81205 - The Boeing Company (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5342-00-541-7585
- Characteristic
- Specifications
- FIIG
- Specifications
- A539Z0
- Durometer Hardness Rating [BMJT]
- 50.0 Minimum And 70.0 Maximum
- Contracted Length [ATEN]
- 0.170 Inches Nominal
- Extended Length [ATEM]
- 1.170 Inches Nominal
- Fsc Application Data [ZZZV]
- Torsion Bar Installation,Aircraft
- Material [MATT]
- Rubber Synthetic
- Neutral Length [CPYN]
- 0.670 Inches Nominal
- Large End Inside Diameter [CDDB]
- 1.300 Inches Nominal
- Large End Outside Diameter [AHMG]
- 1.970 Inches Nominal
- Small End Inside Diameter [CDDD]
- 0.400 Inches Nominal
- Small End Outside Diameter [AHMH]
- 1.500 Inches Nominal
- Thickness At Both Ends [CPYX]
- 0.090 Inches Nominal
- Thickness Between Ends [CPYW]
- 0.020 Inches Nominal
Weapon Systems (WSDC) 5342-00-541-7585
DLA Procurement Analysis 5342-00-541-7585
- Last Stock Position:
- 140 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5342-00-541-7585
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- FG
- B-52 STRATO FORTRESS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
- Physical Category:
- 1
- Bin
NATO Stock Numbers Related to 5342-00-541-7585
Freight Information 5342-00-541-7585
5342-00-541-7585 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5342-00-541-7585 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 5342-00-541-7585 is rated as class 70 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5342-00-541-7585 is not classified as a special type of cargo when transported by water. 5342-00-541-7585 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5342-00-541-7585
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Procurement History 5342-00-541-7585 3 Records
Contracting Technical Data File (CTDF) 5342-00-541-7585 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: