5342-33-157-5454

| RNVC: 2 | DAC: 2 19 Nov 1992 5998-14-483-9528 https//www.nsnlookup.com /fsg-53/fsc-5342/es 5342-33-157-5454
Engine Accessory Bracket 5342331575454 5342-33-157-5454 5342331575454 331575454 is a bracket specifically

Documents 5310-66-146-1149 2+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5342/es 5342-33-157-5454
Engine Accessory Bracket 5342331575454 ) Secondary Buy RNCC 5 RNVC 2 DAC 3 3092 311614 https//www.nsnlookup.com

3120-01-341-1781 3120013411781 013411781 is a tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. the overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. for items made of rubber, see bushing, nonmetallic. see also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. excludes bushing, drill, jig.

browser . 5895-12-331-1924Signal Data Converter5895123311924 123311924 A1Z10158768 10158768 3092 311614
RNVC 2 DAC 3 10158768 C0426 - Hensoldt Sensors Gmbh (Active) Secondary Buy RNCC 5 RNVC 2 DAC 3 3092 311614

5365-15-054-0212 5365150540212 150540212 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.