What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

A Foot Bolt (BOLT,FOOT) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate. The bar is thrown by foot pressure and may be retracted by foot action or by spring action. Excludes BOLT, BARREL.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Chain Bolt?

A Chain Bolt (BOLT,CHAIN) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate and equipped with a spring to hold the bar in the closed position. The bolt is operated by means of a chain attached to one end of the bar, and is usually installed in a vertical position.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

Hardware, Commercial - United States (US)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United States (US) - NCB is 00 to 09

Page 9 of 1045

NSN Format for Hardware, Commercial
Codified by United States

53	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United States (US)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 230 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 844 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 3054 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 202 Items
Holder,Loop 55 Items
Holder,Spring 1184 Items
What is a Compression Cup? 414 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 1759 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 55 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 57 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 4719 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 1406 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 444 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 76 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 9570 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 53 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Stake Pocket? 10 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 377 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 1452 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 128 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Foot Bolt? 15 Items: A Foot Bolt (BOLT,FOOT) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate. The bar is thrown by foot pressure and may be retracted by foot action or by spring action. Excludes BOLT, BARREL.
What is a Surface Bolt? 34 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 144 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 275 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Mortise Bolt? 13 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 21 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 61 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 191 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 28 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Chain Bolt? 12 Items: A Chain Bolt (BOLT,CHAIN) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate and equipped with a spring to hold the bar in the closed position. The bolt is operated by means of a chain attached to one end of the bar, and is usually installed in a vertical position.
What is a Mortise Latch Set? 224 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 250 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 611 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 39 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 45 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 238 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 77 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 24 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 70 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 175 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 204 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 217 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 284 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 56 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 153 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Sliding Door Track Bracket? 89 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Doorknob? 38 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 251 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 274 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 144 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 28 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 39 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 29 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 2846 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 279 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 272 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 121 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 48 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 600 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1299 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 390 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 150 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 431 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 999 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 200 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 19 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Drift Bolt? 21 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Screw Hook? 98 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 261 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 1411 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 7198 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 3508 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1582 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 55 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 780 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Shaft Collar? 92 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Suction Cup? 93 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 133 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 19 Items
What is a Blank Panel? 1088 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 354 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 112 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 377 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 1634 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Recording Paper Roll Hub? 14 Items: A Recording Paper Roll Hub (HUB,ROLL,RECORDING PAPER) is a hub used as a short axis on the end of a roll of recording paper.
What is a Plain Solid Disk? 1257 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 33 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 21 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is a Sash Pulley? 26 Items: A Sash Pulley (PULLEY,SASH) is an encased wheel with a grooved face, designed to provide freedom of movement to a rope or chain used in the hanging of window sash.
What is an Angle Bracket? 21199 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 34 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 81 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 580 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 119 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 471 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 22120 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 601 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 797 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 21 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 105 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 114 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 14 Items
What is a Dust And Moisture Seal Boot? 2235 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 476 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Pipe Covering Protection Saddle? 12 Items: A Pipe Covering Protection Saddle (SADDLE,PIPE COVERING PROTECTION) is a metal item designed to bear pipe on roller type hanger(s) or support(s) to prevent insulation from being damaged or deformed.
What is a Ball Socket Seat? 200 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 40 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 44 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 753 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 93 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1705 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 349 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 60 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 185 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 963 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 390 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 200 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 776 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 118 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 3131 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 57 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 122 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 793 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 5156 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 298 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 52 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 4252 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 5873 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 185 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 47 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 1266 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 81 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Rigid Connecting Link? 119 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Cushioning Pad? 2414 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 200 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 895 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 198 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 125 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 112 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 95 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 3474 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1152 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 1047 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 2030 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 3336 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 58 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 162 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 75 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 88 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 1226 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 147 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is a Body Hub? 38 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Screw Thread Insert And Tool Assortment? 63 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 3147 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 1024 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 415 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 886 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 28210 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 502 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 871 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 382 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 163 Items
What is an Antipilferage Seal? 241 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 2909 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 51 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Picture Hanger? 14 Items: A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 150 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Vehicle Cargo Tie Down? 13 Items: A Vehicle Cargo Tie Down (TIE DOWN,CARGO,VEHICLE) is an item consisting of rope(s), cable(s), chain(s) or strap(s) terminated on one or more end(s) with hook(s), ring(s), clamp(s) and the like, designed to secure or restrain movement of cargo carried on a vehicle. May include spring(s), turnbuckle(s) or other tensioning devices.
What is an Office Machine Lock? 51 Items: An Office Machine Lock (LOCK,OFFICE MACHINE) is a lock designed to secure portable office equipment to desks, tables, or counters to prevent pilferage or unauthorized removal. This item is key operated and may be furnished with an adjustable locking bar or cable.
What is a Lever Bracket? 270 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 973 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 116 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 43 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 71 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 28 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 2133 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 96 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 41628 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 113 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 102 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 693 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Leveling 20 Items
Plate,Engine 84 Items
What is a Retaining Bail? 62 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 49 Items
What is a Beam Gripping Clamp? 101 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 15164 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 316 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 2707 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 1587 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Hinged Standoff? 46 Items: A Snap-In Hinged Standoff (STANDOFF,HINGED,SNAP-IN) is an unthreaded standoff with a projection on both ends which can be snapped, press fitted or locked into position. It must have a hinge or flexible piece of material to allow independent movement of the ends.
What is a Threaded Hinged Standoff? 122 Items: A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Snap-In Plain Standoff? 346 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 245 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 11654 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 1549 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 288 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Shipping Container Bracket? 24 Items: A Shipping Container Bracket (BRACKET,SHIPPING CONTAINER) is a rigid metallic/nonmetallic item of various shapes, designed to be used as a part of the container for the purpose of assembly or retention of item(s) to be contained within.
What is an Antipilferage Seal Locking Wire? 23 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 280 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 202 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is a Fire Extinguisher Safety Plug? 10 Items: A Fire Extinguisher Safety Plug (PLUG,SAFETY,FIRE EXTINGUISHER) is an item of various materials that is threaded, and is to be inserted into part of valve body, for safety, to prevent item from becoming a missile/projectile if ruptured
What is an Arched Cushion? 95 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 144 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 245 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 63 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 10 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 1063 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 232 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 244 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 32 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 298 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Door Stop Arm? 16 Items: A Door Stop Arm (ARM,DOOR STOP) is a device made of metal designed to be attached to a door at one end and a door post on the other end. When the arm is extended it holds the door open.
What is a Mechanic Equipment Hardware Kit? 853 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 107 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 119 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 49 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 120 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 49 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 40 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Door Stop Chain? 16 Items: A Door Stop Chain (CHAIN,DOOR STOP) is an item specifically designed to protect a door from damage by limiting the full opening travel. When installed one end is attached to the door and the other end to the door frame. It has a mounting bracket at each end and at least one compression spring between the chain and bracket to absorb shock. The chain is easily detached from one bracket to allow for opening adjustments, full opening or removal of the door.
What is a Dust And Moisture Seal Protective Cover? 1914 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 197 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 46 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 112 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 44 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 77 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 67 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Safety Cable Kit? 60 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 126 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Positioning Thrust Stop? 22 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Cover Strip? 295 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is a Slotted Nut Locking Device? 11 Items: A Slotted Nut Locking Device (LOCKING DEVICE,SLOTTED NUT) is a U shape metallic item designed to lock a slotted nut on a locking sleeve generally used for bearing(s) mounting. The item is inserted in one slot of the nut and in the sleeve slot and fixed by means of a screw. When locked in position it secures the nut from turning and the mounting bearing from loosening.
What is an Utility Access Door? 1713 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Plastic Filler Block? 30 Items: A Plastic Filler Block (BLOCK,FILLER,PLASTIC) is a filler block installed in a door panel to support the weight of rolled panels.
What is an Utility Resilient Mount? 3320 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 19 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Door Handle Unit? 29 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 32 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 87 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 215 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 2010 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 156 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 86 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 125 Items
What is a Key Blank? 524 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 61 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 216 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 1267 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 54 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 72 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 2343 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 53 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 22 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 354 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 574 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 10 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Lifting Sling Sleeve? 28 Items: A Lifting Sling Sleeve (SLEEVE,LIFTING SLING) is a flexible nonmetallic item specifically designed to fit over or enclose a strap, chain, rope, webbing, or the like to ensure protection to the cargo and lifting gear. It may be molded in a circular or tubular shape, open at both ends, or fabricted into a wrap around clip-on type. The item adheres to smooth surfaces, forms to the shape of the cargo and is resistant to abrasions and cuts.
What is a Gearbox Link Assembly? 17 Items: A Gearbox Link Assembly (LINK ASSEMBLY,GEARBOX) is an item consisting of a bolt, washer(s) and a barrel nut. It is specifically meant to mount a gearbox of a rotary aircraft.
What is a Tie Down Adapter? 134 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 38 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 346 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Stand And Roller Pipe Support Extension Tube? 25 Items: A Stand And Roller Pipe Support Extension Tube (TUBE,EXTENSION,STAND AND ROLLER PIPE SUPPORT) is a tubular item used to extend the length of a SUPPORT, PIPE, and ROLLER.
What is a Lock Bar? 155 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 123 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 21 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 59 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is an Universal Adjustable Chock? 11 Items: An Universal Adjustable Chock (CHOCK,ADJUSTABLE,UNIVERSAL) is a self leveling, height adjustable and re-usable chock, designed to be mounted to all types of rotating equipment to base frames, steel foundations and the like, for the alignment of machinery.
What is a Bumper? 5182 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Top Handler Twist Lock Hardware Kit? 12 Items: A Top Handler Twist Lock Hardware Kit (HARDWARE KIT,TWIST LOCK,TOP HANDLER) is a kit consisting of items such as a pin, bearing, key, washer, nut, and stop screw. It is used on the top handler, twist lock that picks up the shipping containers.
What is an Assembled Nut Retainer Ring? 37 Items: An Assembled Nut Retainer Ring (RETAINER RING,ASSEMBLED NUT) is a flat metal ring with provisions for attaching nuts in predetermined spacing. For ring with nuts assembled see NUT ASSEMBLY,RETAINER RING.
What is a Wire Rope Terminal Retainer? 14 Items: A Wire Rope Terminal Retainer (RETAINER,WIRE ROPE TERMINAL) is an item used to retain a swagged wire rope terminal of a CONTROL ASSEMBLY, PUSH-PULL. It generally has a slot to engage the rope and an adapted hole to fit the rope terminal. It may have mounting means for attachment to, or may be retained in, a clevis.
What is a Cover Retainer? 122 Items: A Cover Retainer (RETAINER,COVER) is an item of various shapes and sizes designed to be attached to a vehicle or a structure as to hold a COVER (as modified). It may include mounting hardware.
What is a Retaining Harness? 72 Items: A Retaining Harness (HARNESS,RETAINING) is an arrangement of adjustable and/or non-adjustable (elastic) straps and hardware designed to affix an item to a structure, a container, and the like. The straps may be mounted on a plate, sewed together, and the like.
What is a Detachable Link? 27 Items: A Detachable Link (LINK,DETACHABLE) is a metal link made in two or more pieces, held securely together by means of a locking pin or other device but may taken apart for reuse. It is used to connect a chain and/or a cable and/or a rope and/or a strap, and the like. Excludes transmission chain links.
What is a Grommet Assembly? 49 Items: A Grommet Assembly is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. May include such items as washers, screws, and bolts.
What is a Door Frame? 19 Items: A Door Frame (FRAME,DOOR) is a casing or enclosing framework, in which a DOOR (as modified) may be set or hung.
What is a Prop Rod? 13 Items: A Prop Rod (ROD,PROP) is a fabricated item of any shape and material used to prop open a toolbox or storage box or other like items. Excludes ROD,HOOD,VEHICULAR.
What is a Threaded Standoff Assembly? 21 Items: A Threaded Standoff Assembly is an item consisting of a STANDOFF,THREADED,SPACING (40280) and one or more NUT (as modified), WASHER (as modified), and the like.
What is a Section Housing Panel? 45 Items: A Section Housing Panel (PANEL,HOUSING,SECTION) is an item of any shape and material designed to mate with other sections to form a complete housing unit. May have louvers or vents to allow passage of airflow.

Stock Items From Supply Class 5340 Page 9 of 1045

5340-01-702-1515
Door Stop Arm

017021515
12639163: RNCC: 3 | RNVC: 2

22 Jun 2022

5340-01-700-0469
Mounting Bracket

017000469
549836: RNCC: 3 | RNVC: 2

14 Mar 2022

5340-01-702-7247
Mounting Plate

017027247
02311239: RNCC: 3 | RNVC: 2

22 Jul 2022

5340-01-700-0490
Dust And Moisture Seal Protective Cap-Plug

017000490
CO2490-AB2: RNCC: 3 | RNVC: 2

14 Mar 2022

5340-01-702-0785
Mounting Bracket

017020785
988-0824: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-699-9917
Access Cover

016999917
D 0 27 0005: RNCC: 3 | RNVC: 2

10 Mar 2022

5340-01-701-5723
Handle Grip

017015723
4368445: RNCC: 3 | RNVC: 2

24 May 2022

5340-01-700-0338
Mounting Bracket

017000338
65917-3: RNCC: 3 | RNVC: 2

12 Mar 2022

5340-01-700-0467
Mounting Bracket

017000467
4537283: RNCC: 3 | RNVC: 2

14 Mar 2022

5340-01-702-7186
Mounting Plate

017027186
70219-03006-117: RNCC: 3 | RNVC: 2

22 Jul 2022

5340-01-702-7099
Spacing Threaded Standoff

017027099
KS830-M451: RNCC: 3 | RNVC: 2

21 Jul 2022

5340-01-701-5609
Block Clamp

017015609
270T0005-233: RNCC: 3 | RNVC: 2

23 May 2022

5340-01-702-0726
Mounting Plate

017020726
988-0357: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0926
Multiple Angle Bracket

017020926
988-0286-001: RNCC: 3 | RNVC: 2
988-0286: RNCC: D | RNVC: 9

21 Jun 2022

5340-01-702-0896
Detent Plunger

017020896
888-1148: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-700-0192
Butt Hinge

017000192
CCA-HINGE-SET: RNCC: 3 | RNVC: 2

11 Mar 2022

5340-01-700-0404
Mounting Bracket

017000404
09010B1310-0: RNCC: 3 | RNVC: 9

14 Mar 2022

5340-01-702-1164
Manual Control Lever

017021164
7402941-02ACPA: RNCC: 3 | RNVC: 2

22 Jun 2022

5340-01-700-0299
Spring Tension Clip

017000299
L3022244-059: RNCC: 3 | RNVC: 2

11 Mar 2022

5340-01-702-1012
Block Clamp

017021012
270T0005-466: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0934
Manual Control Handle

017020934
988-0016: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-6858
Mounting Bracket

017026858
GMK-D-CCSB-2-52: RNCC: 3 | RNVC: 2

20 Jul 2022

5340-01-707-0645
Vehicle Cargo Tie Down

017070645
SRPV2200388-123: RNCC: 3 | RNVC: 2

12 Jan 2023

5340-01-706-5238
Access Cover

017065238
AC04033: RNCC: 3 | RNVC: 2

2 Dec 2022

5340-01-707-0415
Webbing Strap

017070415
71SS0800B: RNCC: 3 | RNVC: 2

11 Jan 2023

5340-01-707-0172
Utility Access Door

017070172
PD20005-1/114 INCHES WIDE: RNCC: 3 | RNVC: 2
PD20005-1: RNCC: 5 | RNVC: 2

10 Jan 2023

5340-01-706-4751
Pipe Hanger

017064751
5271924: RNCC: 3 | RNVC: 2

29 Nov 2022

5340-01-707-0792
Angle Bracket

017070792
988-0701: RNCC: 3 | RNVC: 2

13 Jan 2023

5340-01-706-5423
Dust And Moisture Seal Protective Plug

017065423
IPT3180-14CF7: RNCC: 3 | RNVC: 2

5 Dec 2022

5340-01-706-8874
Loop Clamp

017068874
7082644: RNCC: 3 | RNVC: 2

29 Dec 2022

5340-01-706-9404
Mounting Bracket

017069404
70036-124151-3: RNCC: 3 | RNVC: 2
70036-124151: RNCC: D | RNVC: 9

4 Jan 2023

5340-01-706-9774
Mounting Plate

017069774
12680566: RNCC: 3 | RNVC: 2
12680571: RNCC: D | RNVC: 9

6 Jan 2023

5340-01-706-9923
Retaining Strap

017069923
4W19088-103A: RNCC: 3 | RNVC: 2
4W19088: RNCC: D | RNVC: 9

9 Jan 2023

5340-01-707-0034
Quill Lock Special

017070034
X0606-01032-103: RNCC: 3 | RNVC: 2
PLX0606-01032: RNCC: D | RNVC: 9
X0606-01032: RNCC: D | RNVC: 9

9 Jan 2023

5340-01-702-7775
Mounting Bracket

017027775
5-13-13830-1: RNCC: 3 | RNVC: 2

27 Jul 2022

5340-01-702-7733
Access Cover

017027733
L3053624-008: RNCC: 3 | RNVC: 2
L3053624: RNCC: D | RNVC: 9

27 Jul 2022

5340-01-702-7757
Access Cover

017027757
760-1953-001: RNCC: 3 | RNVC: 2
760-1953: RNCC: D | RNVC: 9

27 Jul 2022

5340-01-702-7782
Dust And Moisture Seal Protective Cap

017027782
8827679: RNCC: 3 | RNVC: 2
8827679 REV-: RNCC: D | RNVC: 9

27 Jul 2022

5340-01-702-7961
Turnbuckle

017027961
160-502029-G001: RNCC: 3 | RNVC: 2

29 Jul 2022

5340-01-702-8052
Utility Access Door

017028052
77C734324G5: RNCC: 3 | RNVC: 2

29 Jul 2022

5340-01-702-7725
Mounting Bracket

017027725
8668542-010: RNCC: 3 | RNVC: 2
8668542/FIND NO.1: RNCC: 5 | RNVC: 9
8668542: RNCC: 5 | RNVC: 9

27 Jul 2022

5340-01-702-1846
Mounting Plate

017021846
180632: RNCC: 3 | RNVC: 2

23 Jun 2022

5340-01-702-1719
Access Cover

017021719
12617501-1: RNCC: 3 | RNVC: 2

22 Jun 2022

5340-01-702-1388
Mounting Bracket

017021388
12618048: RNCC: 3 | RNVC: 2

22 Jun 2022

5340-01-707-1034
Angle Bracket

017071034
326P1S0643-103: RNCC: 3 | RNVC: 2

17 Jan 2023

5340-01-707-1947
Loop Clamp

017071947
9NG0012D8NB: RNCC: 3 | RNVC: 2
TA0220055DC8NB: RNCC: 5 | RNVC: 2
40005D8Y: RNCC: 5 | RNVC: 2
9NG0012: RNCC: D | RNVC: 9

20 Jan 2023

5340-01-707-1496
Angle Bracket

017071496
9M1079-2: RNCC: 3 | RNVC: 2
9M1079-2: RNCC: 3 | RNVC: 2
9M1079-2: RNCC: 3 | RNVC: 2
9M1079: RNCC: D | RNVC: 9

19 Jan 2023

5340-01-707-1257
Dust And Moisture Seal Protective Cover

017071257
278164: RNCC: 3 | RNVC: 2

18 Jan 2023

5340-01-707-1715
Double Angle Bracket

017071715
326P1S5489-205: RNCC: 3 | RNVC: 2

20 Jan 2023

5340-01-707-1180
Angle Bracket

017071180
326P1S0805-103: RNCC: 3 | RNVC: 2

18 Jan 2023

5340-01-706-5908
Mounting Bracket

017065908
7377803: RNCC: 3 | RNVC: 2

7 Dec 2022

5340-01-707-2486
Mechanical Stop

017072486
751-7072505-PN-A5: RNCC: 3 | RNVC: 2

24 Jan 2023

5340-01-707-2163
Utility Resilient Mount

017072163
12665430: RNCC: 3 | RNVC: 2

23 Jan 2023

5340-01-707-4406
Mounting Bracket

017074406
12680567: RNCC: 3 | RNVC: 2

2 Feb 2023

5340-01-708-1224
Dust And Moisture Seal Protective Plug

017081224
00-267499: RNCC: 3 | RNVC: 2

15 Mar 2023

5340-01-700-9320
Electronic Equipment Hardware Kit

017009320
1SKB19-AC1: RNCC: 3 | RNVC: 2

20 Apr 2022

5340-01-708-4114
Rod End Connector

017084114
HMX5: RNCC: 3 | RNVC: 2
HMX5: RNCC: 5 | RNVC: 2

4 Apr 2023

5340-01-707-5080
Cushioning Pad

017075080
3239AS783-1: RNCC: 3 | RNVC: 2
3239AS783: RNCC: 3 | RNVC: 2

6 Feb 2023

5340-01-707-4890
Air Cone

017074890
HAN 462-2: RNCC: 3 | RNVC: 2
A-445-26 ITEM 39: RNCC: 5 | RNVC: 2
A-445-26: RNCC: D | RNVC: 9

6 Feb 2023

5340-01-707-4186
Access Cover

017074186
38-18861: RNCC: 3 | RNVC: 2
18272-ITEM-20: RNCC: 5 | RNVC: 2
18272 REV N SHEET 1 FIND 20: RNCC: 5 | RNVC: 9
18272: RNCC: D | RNVC: 9

1 Feb 2023

5340-01-707-3482
Bumper

017073482
9.05411E+11: RNCC: 3 | RNVC: 2

28 Jan 2023

5340-01-707-3296
Loop Clamp

017073296
5144336-383: RNCC: 3 | RNVC: 2
5144336: RNCC: D | RNVC: 9

27 Jan 2023

5340-01-707-2972
Adjustable Support Pipe Stand

017072972
SDNS8906: RNCC: 3 | RNVC: 2
SDNS8906: RNCC: 5 | RNVC: 2

26 Jan 2023

5340-01-705-8033
Access Cover

017058033
13056439: RNCC: 3 | RNVC: 2

13 Oct 2022

5340-01-708-2113
Block Clamp

017082113
7-611830044-101: RNCC: 3 | RNVC: 2

22 Mar 2023

5340-01-708-1783
Loop Clamp

017081783
9NG0012H8HR: RNCC: 3 | RNVC: 2
TA0220055HO8HR: RNCC: 5 | RNVC: 2
40005SS12HW: RNCC: 5 | RNVC: 2
9NG0012: RNCC: D | RNVC: 9

20 Mar 2023

5340-01-708-2766
Vent Plug

017082766
P90059: RNCC: 3 | RNVC: 2
P90269-ITEM 80.1.4: RNCC: C | RNVC: 1
P90269: RNCC: D | RNVC: 9

27 Mar 2023

5340-01-707-6780
Cushioning Pad

017076780
12582101-101: RNCC: 3 | RNVC: 2
12582101: RNCC: D | RNVC: 9

15 Feb 2023

5340-01-705-8570
Cushioning Pad

017058570
12600634: RNCC: 3 | RNVC: 2
12600634: RNCC: 3 | RNVC: 2

18 Oct 2022

5340-01-707-6959
Bumper

017076959
SSN520: RNCC: 3 | RNVC: 2
8028-080-8100: RNCC: D | RNVC: 9

16 Feb 2023

5340-01-707-6460
Loop Clamp

017076460
79-22285: RNCC: 3 | RNVC: 2
20916: RNCC: D | RNVC: 9

14 Feb 2023

5340-01-707-6944
Mounting Plate

017076944
4106AS0115-1: RNCC: 3 | RNVC: 2
4106AS0115-1: RNCC: 5 | RNVC: 2

16 Feb 2023

5340-01-707-6296
Assembled Nut Retainer Ring

017076296
2943224-101: RNCC: 3 | RNVC: 2

13 Feb 2023

5340-01-707-5946
Access Cover

017075946
CC14229-001: RNCC: 3 | RNVC: 2
CC14229: RNCC: D | RNVC: 9

10 Feb 2023

5340-01-707-5958
Access Cover

017075958
12615063-003: RNCC: 3 | RNVC: 2
12615063: RNCC: D | RNVC: 9

10 Feb 2023

5340-01-707-5803
Access Cover

017075803
70722559-2: RNCC: 3 | RNVC: 2

9 Feb 2023

5340-01-708-1916
Mounting Plate

017081916
13055361: RNCC: 3 | RNVC: 2
13055361: RNCC: 7 | RNVC: 2

21 Mar 2023

5340-01-708-1879
Spacing Threaded Standoff

017081879
M2140-3005-SM0DL=27MM-PL-12: RNCC: 3 | RNVC: 2
13055865-1: RNCC: 7 | RNVC: 2
13055865: RNCC: D | RNVC: 9

21 Mar 2023

5340-01-705-8117
Double Angle Bracket

017058117
12600632: RNCC: 3 | RNVC: 2
12600632: RNCC: 5 | RNVC: 9

14 Oct 2022

5340-01-706-0003
Crank Handle

017060003
FH-70: RNCC: 3 | RNVC: 2
62705K42: RNCC: 5 | RNVC: 2
4039-514: RNCC: 7 | RNVC: 2

24 Oct 2022

5340-01-705-8710
Block Clamp

017058710
12617617: RNCC: 3 | RNVC: 2

18 Oct 2022

5340-01-705-4038
Dust And Moisture Seal Protective Cover

017054038
007-005214-000: RNCC: 3 | RNVC: 2

19 Sep 2022

5340-01-708-7329
Mounting Bracket

017087329
AB967: RNCC: 3 | RNVC: 2

19 Apr 2023

5340-01-705-4033
Access Cover

017054033
007-000932-002: RNCC: 3 | RNVC: 2
007-000932: RNCC: D | RNVC: 9

19 Sep 2022

5340-01-708-0873
Cover Retainer

017080873
00-971942: RNCC: 3 | RNVC: 2

15 Mar 2023

5340-01-707-7808
Bumper

017077808
13046700: RNCC: 1 | RNVC: 2
402002238: RNCC: 3 | RNVC: 2

22 Feb 2023

5340-01-708-3974
Mounting Plate

017083974
NAS 025-0103: RNCC: 3 | RNVC: 2

4 Apr 2023

5340-01-707-7477
Mounting Plate

017077477
12615063-005: RNCC: 3 | RNVC: 2

21 Feb 2023

5340-01-705-9070
Tie Down Ring

017059070
7082945: RNCC: 3 | RNVC: 2

20 Oct 2022

5340-01-705-8602
Mounting Bracket

017058602
12594817: RNCC: 3 | RNVC: 2

18 Oct 2022

5340-01-707-6500
Snap Hook

017076500
3764T33: RNCC: 3 | RNVC: 2
12615089: RNCC: 7 | RNVC: 2

14 Feb 2023

5340-01-705-8153
Mounting Plate

017058153
8668871-001: RNCC: 3 | RNVC: 2
8668871: RNCC: D | RNVC: 9

14 Oct 2022

5340-01-707-4732
Mounting Plate

017074732
114-1389-4: RNCC: 3 | RNVC: 2

3 Feb 2023

5340-01-705-5089
Mounting Bracket

017055089
9-2-6964: RNCC: 3 | RNVC: 2

22 Sep 2022

5340-01-706-0582
Retaining Strap

017060582
8874T45: RNCC: 3 | RNVC: 2
12675938: RNCC: 7 | RNVC: 2

27 Oct 2022

5340-01-706-0628
Retaining Clip

017060628
7519806: RNCC: 3 | RNVC: 2

28 Oct 2022

5340-01-705-5143
Mounting Bracket

017055143
987-0077-071: RNCC: 3 | RNVC: 2

23 Sep 2022

5340-01-706-1225
Retaining Clamp Assembly

017061225
4H21095-101A: RNCC: 3 | RNVC: 2
4H21095: RNCC: D | RNVC: 9

2 Nov 2022

5340-01-706-1287
Catch Strike

017061287
12666650: RNCC: 3 | RNVC: 2
12638632: RNCC: D | RNVC: 9

2 Nov 2022

5340-01-706-1010
Mounting Bracket

017061010
12610746: RNCC: 3 | RNVC: 2
12610746: RNCC: C | RNVC: 1

1 Nov 2022

5340-01-705-5207
Block Fairlead Section

017055207
251T1608-24: RNCC: 3 | RNVC: 2

23 Sep 2022

5340-01-708-8496
Mounting Bracket

017088496
556-8843849-27: RNCC: 3 | RNVC: 2
R7912701-27: RNCC: C | RNVC: 1
LSA003940-27: RNCC: C | RNVC: 1
8843849: RNCC: D | RNVC: 9

27 Apr 2023

5340-01-708-7708
Clevis Bar

017087708
9L14092: RNCC: 3 | RNVC: 2
9L14000-13 ITEM 14: RNCC: C | RNVC: 1
9L14000-13: RNCC: D | RNVC: 9

21 Apr 2023

5340-01-706-0895
Mounting Bracket

017060895
12612049: RNCC: 3 | RNVC: 2
12612049: RNCC: 5 | RNVC: 2

31 Oct 2022

5340-01-708-8639
Double Angle Bracket

017088639
12647373: RNCC: 3 | RNVC: 2

27 Apr 2023

5340-01-197-3617
Loop Clamp

011973617
SAE-AS9349: RNCC: 3 | RNVC: 1
MS9349-16: RNCC: 3 | RNVC: 2
1213E2672 FIND 44: RNCC: 5 | RNVC: 1
MS9349-16: RNCC: 5 | RNVC: 9
1213E2672 FIND 44: RNCC: 5 | RNVC: 9

20 Dec 1984

5340-01-706-1570
Angle Bracket

017061570
12638957: RNCC: 3 | RNVC: 2
1268051: RNCC: D | RNVC: 9

4 Nov 2022

5340-01-705-5934
Dust And Moisture Seal Protective Cap

017055934
SC2040C: RNCC: 3 | RNVC: 2

28 Sep 2022

5340-01-706-1453
Mounting Bracket

017061453
12610835: RNCC: 3 | RNVC: 2
12610835: RNCC: 5 | RNVC: 9

3 Nov 2022

5340-01-705-7273
Mounting Bracket

017057273
7377763: RNCC: 3 | RNVC: 2

6 Oct 2022

5340-01-705-7121
Block Clamp

017057121
NGC500EG-3B1: RNCC: 3 | RNVC: 2
NGC500EG-3B1: RNCC: 5 | RNVC: 2
NGC500EG-3B1: RNCC: 5 | RNVC: 2
NGC500EG: RNCC: D | RNVC: 9

5 Oct 2022

5340-01-706-2191
Bumper

017062191
CL-6-RPC: RNCC: 3 | RNVC: 2

8 Nov 2022

5340-01-706-2153
Access Cover

017062153
CEE3611-101: RNCC: 3 | RNVC: 2
5803015114: RNCC: 5 | RNVC: 2

8 Nov 2022

5340-01-705-6651
Section Housing Panel

017056651
9-2-1121-04: RNCC: 3 | RNVC: 2

3 Oct 2022

5340-01-706-2701
Mounting Bracket

017062701
12639304: RNCC: 3 | RNVC: 2

12 Nov 2022

5340-01-705-7570
Mounting Bracket

017057570
12609227: RNCC: 3 | RNVC: 2
12609227: RNCC: 5 | RNVC: 9

11 Oct 2022

5340-01-705-7201
Section Block Clamp

017057201
NGC500EG-2B33: RNCC: 3 | RNVC: 2
NGC500EG-2B33: RNCC: 5 | RNVC: 2
NGC500EG-2B33: RNCC: 5 | RNVC: 2
NGC500EG: RNCC: D | RNVC: 9

6 Oct 2022

5340-01-705-7042
Sliding Door Track

017057042
1061A-01-23-12: RNCC: 3 | RNVC: 2

5 Oct 2022

5340-01-705-7017
Sliding Door Track

017057017
1061A-01-22-12: RNCC: 3 | RNVC: 2

5 Oct 2022

5340-01-705-6909
Dust And Moisture Seal Protective Cap

017056909
MS3180-8CW: RNCC: 2 | RNVC: 2

4 Oct 2022

5340-01-705-6852
Loop Clamp

017056852
5204K120: RNCC: 3 | RNVC: 2
11027D4057: RNCC: 7 | RNVC: 2

4 Oct 2022

5340-01-705-6795
Access Cover

017056795
5-13-10847-2: RNCC: 3 | RNVC: 2
5-13-10847: RNCC: D | RNVC: 9

4 Oct 2022

5340-01-625-4752
Retaining Strap

016254752
NAS1711: RNCC: 3 | RNVC: 1
NAS1711C14-11SX: RNCC: 3 | RNVC: 2

5 Feb 2014

5340-01-140-0925
Loop Clamp

011400925
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WCH04: RNCC: 3 | RNVC: 2
AS21919WCH04: RNCC: 3 | RNVC: 9
MS21919WCH4: RNCC: 5 | RNVC: 2
AS21919WCH4: RNCC: 5 | RNVC: 2
MS21919WCH4: RNCC: 5 | RNVC: 2
AS21919WCH04: RNCC: 5 | RNVC: 2
AS21919WCH4: RNCC: 5 | RNVC: 9
AS21919WCH4: RNCC: 5 | RNVC: 9
3177T70: RNCC: 5 | RNVC: 9

8 Oct 1982

5340-01-612-8175
Angle Bracket

016128175
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-225: RNCC: 3 | RNVC: 2
MS9592-225: RNCC: 5 | RNVC: 9

22 Oct 2012

5340-01-084-9549
Loop Clamp

010849549
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C6SW: RNCC: 3 | RNVC: 2

26 Oct 1979

5340-01-614-6193
Spacing Threaded Standoff

016146193
NAS1831: RNCC: 3 | RNVC: 1
NAS1831AC4C40: RNCC: 3 | RNVC: 2

10 Dec 2012

5340-01-086-3774
Clamp Bolt Assembly

010863774
M85731/1-7CP: RNCC: 2 | RNVC: 2
MIL-DTL-85731/1: RNCC: 4 | RNVC: 1
MIL-F-85731/1: RNCC: 5 | RNVC: 9
MS14108-7CP: RNCC: 5 | RNVC: 9

26 Nov 1979

5340-01-615-3203
Retaining Strap

016153203
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D8W44N: RNCC: 3 | RNVC: 2

9 Jan 2013

5340-01-257-0589
Electrical-Mechanical Equipment Post

012570589
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4C36: RNCC: 3 | RNVC: 2

11 Jun 1987

5340-01-618-7997
Dust And Moisture Seal Protective Cap

016187997
605072-0: RNCC: 3 | RNVC: 2
F9185-000127: RNCC: 6 | RNVC: 9

7 May 2013

5340-01-714-4403

017144403
06208-02650-079: RNCC: 3 | RNVC: 2

5340-01-713-7171

017137171
V047057: RNCC: 3 | RNVC: 2

5340-01-161-2684
Loop Clamp

011612684
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D10-13N: RNCC: 3 | RNVC: 2

3 Sep 1983

5340-01-163-0914
Retaining Strap

011630914
NAS1711: RNCC: 3 | RNVC: 1
NAS1711D15-23S: RNCC: 3 | RNVC: 2

28 Sep 1983

5340-01-714-4337

017144337
31-15-6844: RNCC: 3 | RNVC: 2

5340-01-714-2704

017142704
06208-02550-132: RNCC: 3 | RNVC: 2
PL06208-02550: RNCC: D | RNVC: 9

5340-01-713-7080

017137080
M0620-00046-042: RNCC: 3 | RNVC: 2

5340-01-713-6961

017136961
330NX10528SLFBB: RNCC: 3 | RNVC: 2

5340-01-712-4596

017124596
951: RNCC: 3 | RNVC: 2

5340-01-685-0401
Butt Hinge

016850401
MS20001P-3-1200: RNCC: 2 | RNVC: 2
MS20001P3-1200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

26 Nov 2019

5340-01-714-5369

017145369
06808-06038-047: RNCC: 3 | RNVC: 2
PL06808-06038: RNCC: D | RNVC: 9
AL06808-06038: RNCC: D | RNVC: 9

5340-01-713-5481

017135481
NV3-732-A10: RNCC: 3 | RNVC: 2

5340-01-713-8381

017138381
M0620-00010-041: RNCC: 3 | RNVC: 2

5340-01-714-2706

017142706
06208-02550-178: RNCC: 3 | RNVC: 2
PL06208-02550: RNCC: D | RNVC: 9

5340-01-714-5642

017145642
4189AS2010-6: RNCC: 3 | RNVC: 2
4189AS2010: RNCC: D | RNVC: 9

5340-01-714-5648

017145648
4189AS2010-18: RNCC: 3 | RNVC: 2
4189AS2010: RNCC: D | RNVC: 9

5340-01-714-0069

017140069
06208-03016-042: RNCC: 3 | RNVC: 2

5340-01-714-2282

017142282
9NG0012D11HR: RNCC: 3 | RNVC: 2

5340-01-713-5989

017135989
30-302-2C07J09: RNCC: 3 | RNVC: 2
30-302-2C07J09: RNCC: 5 | RNVC: 2
30-302-2C07J09: RNCC: 5 | RNVC: 2
30-302-2C07J09: RNCC: 5 | RNVC: 2
30-302-2C07J09: RNCC: 5 | RNVC: 2

5340-01-712-4674

017124674
925-0662-01: RNCC: 3 | RNVC: 2
925-0703-01: RNCC: D | RNVC: 9

5340-01-714-4425

017144425
06208-02650-067: RNCC: 3 | RNVC: 2

5340-01-713-5554

017135554
5142T42P03: RNCC: 3 | RNVC: 2
5142T42: RNCC: D | RNVC: 9

5340-01-714-4444

017144444
06208-02552-063: RNCC: 3 | RNVC: 2

5340-01-714-5329

017145329
06MEO-01253-101: RNCC: 3 | RNVC: 2
PL06MEO-01253: RNCC: D | RNVC: 9

5340-01-714-4002

017144002
ON002319: RNCC: 3 | RNVC: 2
20540-PP: RNCC: 5 | RNVC: 2

5340-01-713-5195

017135195
NV3-727/8: RNCC: 3 | RNVC: 2

5340-01-713-7330

017137330
M0620-00127-046: RNCC: 3 | RNVC: 2

5340-01-713-8333

017138333
06550-02305-121: RNCC: 3 | RNVC: 2
06550-02305PL: RNCC: D | RNVC: 9
06550-02305: RNCC: D | RNVC: 9

5340-01-713-7814

017137814
3881383: RNCC: 3 | RNVC: 2

5340-01-712-2861

017122861
12647363: RNCC: 3 | RNVC: 2

5340-01-713-5652

017135652
123SME90132: RNCC: 3 | RNVC: 2
123SME90132-47: RNCC: 3 | RNVC: 2

5340-01-714-5686

017145686
512-8837220-27-3: RNCC: 3 | RNVC: 2
LSA003888/A-27-3: RNCC: 5 | RNVC: 2
R6432112-27-3: RNCC: 5 | RNVC: 2
LSA003888/A: RNCC: D | RNVC: 9

5340-01-714-4419

017144419
06208-02650-214: RNCC: 3 | RNVC: 2

5340-01-714-3618

017143618
IM-CVN73-004: RNCC: 3 | RNVC: 2
WYNN COTS MANUAL PG 32 IDENT 10: RNCC: C | RNVC: 1

5340-01-713-8066

017138066
5155T16G01: RNCC: 3 | RNVC: 2

5340-01-713-9124

017139124
M0620-00043-041: RNCC: 3 | RNVC: 2
M0620-00043PL: RNCC: D | RNVC: 9

5340-01-687-4324
Retaining Strap

016874324
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D11W30N: RNCC: 3 | RNVC: 2

1 Apr 2020

5340-01-689-5992
Corrosion Preventive Anode

016895992
212094: RNCC: 3 | RNVC: 2
US-100466: RNCC: 5 | RNVC: 2

29 Jun 2020

5340-01-713-6777

017136777
13674222-003: RNCC: 3 | RNVC: 2
13674222: RNCC: D | RNVC: 9

5340-01-714-4129

017144129
MI-2-018: RNCC: 3 | RNVC: 2

5340-01-714-2642

017142642
06208-02029-055: RNCC: 3 | RNVC: 2
PL06208-02029: RNCC: D | RNVC: 9

5340-01-713-7698

017137698
M0620-00011-062: RNCC: 3 | RNVC: 2
M0620-00011PL: RNCC: D | RNVC: 9

5340-01-714-4435

017144435
06208-02650-097: RNCC: 3 | RNVC: 2

5340-01-713-7234

017137234
M0620-00010-059: RNCC: 3 | RNVC: 2
M0620-00010PL: RNCC: D | RNVC: 9

5340-01-713-9377

017139377
4571198: RNCC: 3 | RNVC: 2

5340-01-714-0708

017140708
NAS1712D13-10N: RNCC: 3 | RNVC: 2

5340-01-713-7601

017137601
M0620-00069-112: RNCC: 3 | RNVC: 2

5340-01-713-9997

017139997
N0005: RNCC: 3 | RNVC: 2
PD20005-1: RNCC: D | RNVC: 9

5340-01-711-1969

017111969
5N-4444: RNCC: 3 | RNVC: 2

5340-01-714-4417

017144417
06208-02550-426: RNCC: 3 | RNVC: 2

5340-01-713-7843

017137843
M0620-00011-054: RNCC: 3 | RNVC: 2

5340-01-713-9003

017139003
M0620-00072-042: RNCC: 3 | RNVC: 2

5340-01-714-4231

017144231
CG-3150S: RNCC: 3 | RNVC: 2
5-13-11107-1: RNCC: 5 | RNVC: 2
5-13-11107: RNCC: 7 | RNVC: 2

5340-01-714-2673

017142673
06208-02300-429: RNCC: 3 | RNVC: 2
PL06208-02300: RNCC: D | RNVC: 9

5340-01-714-2648

017142648
06208-02300-418: RNCC: 3 | RNVC: 2
PL06208-02300: RNCC: D | RNVC: 9

5340-01-714-4429

017144429
06208-02650-052: RNCC: 3 | RNVC: 2

5340-01-714-4693

017144693
2439-100P680: RNCC: 3 | RNVC: 2

5340-01-714-5078

017145078
12064-2034-01: RNCC: 3 | RNVC: 2
12064-2034: RNCC: D | RNVC: 9

5340-01-714-3010

017143010
700872: RNCC: 3 | RNVC: 2

5340-01-685-8566
Retaining Strap

016858566
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D26W62N: RNCC: 3 | RNVC: 2

16 Jan 2020

5340-01-691-3983
Dust And Moisture Seal Protective Cap-Plug

016913983
NAS834: RNCC: 3 | RNVC: 1
NAS834-179: RNCC: 3 | RNVC: 2

7 Oct 2020

5340-01-223-7957
Electrical-Mechanical Equipment Post

012237957
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C4C14: RNCC: 3 | RNVC: 2

6 Jan 1986

5340-01-713-8176

017138176
06208-02405-045: RNCC: 3 | RNVC: 2
06208-02405PL: RNCC: D | RNVC: 9

5340-01-713-7299

017137299
M0630-00000-115: RNCC: 3 | RNVC: 2
M0630-00000: RNCC: D | RNVC: 9

5340-01-714-0803

017140803
M0620-00037-102: RNCC: 3 | RNVC: 2

5340-01-713-9673

017139673
N0031: RNCC: 3 | RNVC: 2

5340-01-714-4437

017144437
06208-02550-187: RNCC: 3 | RNVC: 2

5340-01-713-9996

017139996
M0620-00072-049: RNCC: 3 | RNVC: 2

5340-01-714-2221

017142221
12642077: RNCC: 3 | RNVC: 2

5340-01-714-3741

017143741
3F 5 3/4 M 16 CR KD LH M 30 4 I-: RNCC: 3 | RNVC: 1

5340-01-713-9244

017139244
M0620-00014-046: RNCC: 3 | RNVC: 2

5340-01-711-7619

017117619
M6855/1-107637: RNCC: 2 | RNVC: 2
MIL-PRF-6855/1: RNCC: 4 | RNVC: 1
MIL-PRF-6855: RNCC: 5 | RNVC: 9
7286408/SHEET 7-12: RNCC: C | RNVC: 1
H462-0412-PN-90: RNCC: C | RNVC: 1
167-7066791-PN-142: RNCC: C | RNVC: 1
H547-1112-PN-142: RNCC: C | RNVC: 1
7066791/SHEET 7-16: RNCC: C | RNVC: 1
151-7286408-PN-90: RNCC: C | RNVC: 1
7066791: RNCC: D | RNVC: 9

5340-01-713-5594

017135594
7N-7818: RNCC: 3 | RNVC: 2

5340-01-714-5506

017145506
06209-02002-048: RNCC: 3 | RNVC: 2
PL06209-02002: RNCC: D | RNVC: 9

5340-00-188-0334
Turnbuckle

001880334
ASTM-F1145: RNCC: 3 | RNVC: 1
ASTM-F1145-I1G 5/8X6: RNCC: 3 | RNVC: 2
FF-T-791: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-701-8019
Dust And Moisture Seal Protective Cap

017018019
MS3474W1419SX: RNCC: 3 | RNVC: 2
5-15-34995: RNCC: 7 | RNVC: 2

8 Jun 2022

5340-01-678-3987
Loop Clamp

016783987
MS9826-06N: RNCC: 2 | RNVC: 2
MS9826: RNCC: 4 | RNVC: 1
MS9826-06: RNCC: 5 | RNVC: 9

5 Feb 2019

5340-00-187-8192
Turnbuckle

001878192
ASTM-F1145: RNCC: 3 | RNVC: 1
ASTM-F1145-I1D 1X12: RNCC: 3 | RNVC: 2
FF-T-791: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-123-7593
Buckle

011237593
MS51927-2: RNCC: 2 | RNVC: 2
MIL-B-543: RNCC: 4 | RNVC: 1

17 Dec 1981

5340-01-127-8926
Webbing Strap

011278926
NAS1383: RNCC: 3 | RNVC: 1
NAS1383D30D60R: RNCC: 3 | RNVC: 2
3100050A059-026: RNCC: E | RNVC: 8
3100050A059-026: RNCC: E | RNVC: 8
NAS1383D26D59R: RNCC: E | RNVC: 8
687345-405: RNCC: E | RNVC: 8

10 Mar 1982

5340-01-679-0334
Spring Tension Clip

016790334
284T0055Y1: RNCC: 3 | RNVC: 1
284T0055-1: RNCC: C | RNVC: 1

7 Mar 2019

5340-00-005-0538
Loop Clamp

000050538
MS9352-13: RNCC: 2 | RNVC: 2
MS9352: RNCC: 4 | RNVC: 1

19 Jun 1972

5340-00-188-0280
Turnbuckle

001880280
ASTM-F1145: RNCC: 3 | RNVC: 1
ASTM-F1145-I1E 1/4X4: RNCC: 3 | RNVC: 2
FF-T-791: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-113-3843
Loop Clamp

011133843
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C28KWX: RNCC: 3 | RNVC: 2
MS21122C28: RNCC: 5 | RNVC: 9

21 May 1981

5340-01-710-8178
Mounting Bracket

017108178
12646087: RNCC: 3 | RNVC: 2

27 Jun 2023

5340-01-710-7908
Mounting Bracket

017107908
A1-55252D: RNCC: 3 | RNVC: 2

26 Jun 2023

5340-01-710-7807
Mounting Bracket

017107807
12641975: RNCC: 3 | RNVC: 2
12641975: RNCC: C | RNVC: 1

23 Jun 2023

5340-01-710-7679
Mounting Bracket

017107679
12640146: RNCC: 3 | RNVC: 2
12640146: RNCC: C | RNVC: 1

23 Jun 2023

5340-01-710-9164
Mounting Plate

017109164
7-611B25154-005: RNCC: 3 | RNVC: 2
7-611B25154: RNCC: D | RNVC: 9

7 Jul 2023

5340-01-708-8099
Dust And Moisture Seal Protective Cap

017088099
677-262-C-G1104-2: RNCC: 3 | RNVC: 2
1000210570: RNCC: 7 | RNVC: 2

25 Apr 2023

5340-01-710-9279
Cushioning Pad

017109279
5-77-3640: RNCC: 1 | RNVC: 2
350-1001: RNCC: 3 | RNVC: 2

10 Jul 2023

5340-01-711-0235
Mounting Bracket

017110235
RAM-238U: RNCC: 3 | RNVC: 2
D2308 001: RNCC: D | RNVC: 9

14 Jul 2023

5340-01-711-0177
Rod End Clevis

017110177
21630 2: RNCC: 3 | RNVC: 2

14 Jul 2023

5340-01-711-0068
Mounting Bracket

017110068
223-8216643-PT-A510: RNCC: 3 | RNVC: 2
H751-0512-PT-A510: RNCC: C | RNVC: 1
223-8216643: RNCC: D | RNVC: 9

14 Jul 2023

5340-01-710-9939
Friction Catch

017109939
12375523: RNCC: 3 | RNVC: 2
12375523: RNCC: C | RNVC: 1

13 Jul 2023

5340-01-710-9776
Mounting Bracket

017109776
5-13-10108-1: RNCC: 3 | RNVC: 2
5-13-10108-1: RNCC: 5 | RNVC: 2
5-13-10108: RNCC: D | RNVC: 9

12 Jul 2023

5340-01-710-9734
Mounting Plate

017109734
8668264-018: RNCC: 3 | RNVC: 2
565-8668264: RNCC: D | RNVC: 9

12 Jul 2023

5340-01-710-9624
Loop Clamp

017109624
AS21919WDE22: RNCC: 3 | RNVC: 2
8794840/SHEET 4, FIND 249: RNCC: C | RNVC: 1

11 Jul 2023

5340-01-145-4294
Spring Tension Clip

011454294
NASM24066/4: RNCC: 3 | RNVC: 1
M24066/4-009: RNCC: 3 | RNVC: 2
M24066/4-009: RNCC: 5 | RNVC: 9
MIL-C-24066/4: RNCC: 5 | RNVC: 9

11 Jan 1983

5340-01-143-7518
Turnbuckle Body

011437518
NASM27954: RNCC: 3 | RNVC: 1
MS27954-6: RNCC: 3 | RNVC: 2
FF-T-791: RNCC: 5 | RNVC: 9
MS27954-6: RNCC: 5 | RNVC: 9

8 Dec 1982

5340-01-702-7236
Mounting Bracket

017027236
12609827: RNCC: 3 | RNVC: 2
12609827: RNCC: 5 | RNVC: 2

22 Jul 2022

5340-01-707-7294
Mounting Bracket

017077294
12615063-004: RNCC: 3 | RNVC: 2

18 Feb 2023

5340-01-706-4649
Clip Retainer Plate

017064649
3362013-3: RNCC: 3 | RNVC: 2
3362013: RNCC: D | RNVC: 9

29 Nov 2022

5340-01-702-6486
Mounting Bracket

017026486
12685314: RNCC: 3 | RNVC: 2
12685314: RNCC: 5 | RNVC: 2

19 Jul 2022

5340-01-707-6893
Loop Clamp

017076893
NAS1715CT32SWH: RNCC: 3 | RNVC: 2
NAS1715: RNCC: D | RNVC: 9

16 Feb 2023

5340-01-706-4357
Dust And Moisture Seal Protective Cap

017064357
759000-000: RNCC: 3 | RNVC: 2

23 Nov 2022

5340-01-707-5665
Manual Control Handle

017075665
N221312: RNCC: 3 | RNVC: 2
1210100051-4: RNCC: 7 | RNVC: 2

9 Feb 2023

5340-01-706-3687
Cushioning Pad

017063687
5-19-14814-001: RNCC: 3 | RNVC: 2
104588-011: RNCC: 5 | RNVC: 2

18 Nov 2022

5340-01-707-6188
Detachable Link

017076188
3863T21: RNCC: 3 | RNVC: 2
12615088: RNCC: 7 | RNVC: 2

13 Feb 2023

5340-01-707-5507
Mounting Plate

017075507
3239AS1451-1: RNCC: 3 | RNVC: 2
3239AS1451-1: RNCC: 5 | RNVC: 2

8 Feb 2023

5340-01-706-2905
Mounting Plate

017062905
11B5091859: RNCC: 3 | RNVC: 2

14 Nov 2022

5340-01-706-2398
Mounting Bracket

017062398
12610456: RNCC: 3 | RNVC: 2
12610456: RNCC: C | RNVC: 1

9 Nov 2022

5340-01-706-2064
Access Cover

017062064
12638860: RNCC: 3 | RNVC: 2

8 Nov 2022

5340-01-706-1199
Synchro Clamp

017061199
7378047: RNCC: 3 | RNVC: 2
585-7378047: RNCC: D | RNVC: 9

2 Nov 2022

5340-01-706-1980
Mounting Bracket

017061980
201757537-10: RNCC: 3 | RNVC: 2

7 Nov 2022

5340-01-707-3417
Dust And Moisture Seal Protective Cover

017073417
2933166-102: RNCC: 3 | RNVC: 2

28 Jan 2023

5340-01-706-0673
Dust And Moisture Seal Protective Cap

017060673
015559S7-12D07: RNCC: 3 | RNVC: 2
015559S7: RNCC: D | RNVC: 9

28 Oct 2022

5340-01-706-1519
Bumper

017061519
ERB-241612-142: RNCC: 3 | RNVC: 2

3 Nov 2022

5340-01-706-1517
Double Angle Bracket

017061517
12638947: RNCC: 3 | RNVC: 2

3 Nov 2022

5340-01-707-4799
Utility Resilient Mount

017074799
2943211-101: RNCC: 3 | RNVC: 2

4 Feb 2023

5340-01-707-4045
Mounting Bracket

017074045
12592127: RNCC: 3 | RNVC: 2

31 Jan 2023

5340-01-706-4163
Loop Clamp

017064163
366E730-1: RNCC: 3 | RNVC: 2

22 Nov 2022

5340-01-707-6577
Loop Clamp

017076577
30-302-2D21J24: RNCC: 3 | RNVC: 2
30-302-2D21J24: RNCC: 5 | RNVC: 2
30-302-2D21J24: RNCC: 5 | RNVC: 2
30-302-2D21J24: RNCC: 5 | RNVC: 2
30-302-2D21J24: RNCC: 5 | RNVC: 2
30-302: RNCC: D | RNVC: 9

15 Feb 2023

5340-01-706-2999
Mounting Bracket

017062999
12582105: RNCC: 3 | RNVC: 2

15 Nov 2022

5340-01-707-6823
Assembled Nut Retainer Ring

017076823
2943228-101: RNCC: 3 | RNVC: 2

15 Feb 2023

5340-01-707-6822
Helical Compression Spring Retainer

017076822
2943226-101: RNCC: 3 | RNVC: 2

15 Feb 2023

5340-01-706-3220
Mounting Plate

017063220
B003310M05076-0031: RNCC: 3 | RNVC: 2

16 Nov 2022

5340-01-707-7535
Section Block Clamp

017077535
NGC500EG-4A1: RNCC: 3 | RNVC: 2
NGC500EG-4A1: RNCC: 5 | RNVC: 2
NGC500EG-4A1: RNCC: 5 | RNVC: 2
NGC500EG: RNCC: D | RNVC: 9

21 Feb 2023

5340-01-706-4220
Mounting Plate

017064220
U000002442: RNCC: 3 | RNVC: 2
DAAK018463 REV-SEQ 042: RNCC: C | RNVC: 1
DAAK018463: RNCC: D | RNVC: 9

22 Nov 2022

5340-01-706-6268
Utility Resilient Mount

017066268
1334112: RNCC: 3 | RNVC: 2

8 Dec 2022

5340-01-706-6105
Utility Resilient Mount

017066105
5215-N: RNCC: 3 | RNVC: 2

8 Dec 2022

5340-01-706-6093
Angle Bracket

017066093
3362013-9: RNCC: 3 | RNVC: 2
3362013: RNCC: D | RNVC: 9

8 Dec 2022

5340-01-705-4603
Dirt And Liquid Deflector

017054603
184683-1: RNCC: 3 | RNVC: 2

20 Sep 2022

5340-01-707-8541
Mounting Bracket

017078541
M121-2704: RNCC: 3 | RNVC: 2

25 Feb 2023

5340-01-707-8485
Window Retaining Plate

017078485
13074153: RNCC: 3 | RNVC: 2

25 Feb 2023

5340-01-707-8317
Blank Panel

017078317
4106AS0110-3: RNCC: 3 | RNVC: 2
4106AS0110: RNCC: D | RNVC: 9

24 Feb 2023

5340-01-707-8292
Antipilferage Seal

017078292
563-7067897-86: RNCC: 3 | RNVC: 2
H696-1603-86: RNCC: 5 | RNVC: 9
7067897: RNCC: D | RNVC: 9

24 Feb 2023

5340-01-706-5742
Section Block Clamp

017065742
NGC500EG-2B39: RNCC: 3 | RNVC: 2
NGC500EG-2B39: RNCC: 5 | RNVC: 2
NGC500EG-2B39: RNCC: 5 | RNVC: 2
NGC500EG: RNCC: D | RNVC: 9

6 Dec 2022

5340-01-706-5623
Utility Access Door

017065623
5-13-10518-1: RNCC: 3 | RNVC: 2
5-13-10518: RNCC: D | RNVC: 9

6 Dec 2022

5340-01-707-8157
Access Cover

017078157
3364070-1: RNCC: 3 | RNVC: 2
3364070: RNCC: D | RNVC: 9

24 Feb 2023

5340-01-707-8088
Mounting Bracket

017078088
566-6985433-A4: RNCC: 3 | RNVC: 2
H623-0506-A4: RNCC: C | RNVC: 1
566-6985433: RNCC: D | RNVC: 9

23 Feb 2023

5340-01-706-7641
Mounting Plate

017067641
167-7066791-PN-21: RNCC: 3 | RNVC: 2
H547-1112-PN-21: RNCC: C | RNVC: 1

16 Dec 2022

5340-01-706-7551
Tie Down Ring

017067551
12638863-T: RNCC: 3 | RNVC: 2
12638863: RNCC: D | RNVC: 9

16 Dec 2022

5340-01-708-0127
Mounting Bracket

017080127
438-0047 ICD: RNCC: 1 | RNVC: 2
438-0047: RNCC: 3 | RNVC: 2

9 Mar 2023

5340-01-706-7391
Mounting Bracket

017067391
9-2-4797: RNCC: 3 | RNVC: 2

15 Dec 2022

5340-01-706-7329
Spacing Threaded Standoff

017067329
CB3001AA3-22HP750: RNCC: 3 | RNVC: 2
CB3001: RNCC: D | RNVC: 9

15 Dec 2022

5340-01-707-9166
Retaining Clip

017079166
11588650: RNCC: 3 | RNVC: 2

3 Mar 2023

5340-01-705-5232
Mounting Bracket

017055232
70436-41106-10: RNCC: 3 | RNVC: 2

23 Sep 2022

5340-01-705-5178
Mounting Bracket

017055178
9-2-6992-1: RNCC: 3 | RNVC: 2
9-2-6992: RNCC: D | RNVC: 9

23 Sep 2022

5340-01-707-9060
Synchro Clamp

017079060
82002-C: RNCC: 3 | RNVC: 2
3213-1 ITEM 69: RNCC: C | RNVC: 1

2 Mar 2023

5340-01-705-5126
Rod End Connector

017055126
140T2928-4: RNCC: 3 | RNVC: 2
140T2928: RNCC: D | RNVC: 9

22 Sep 2022

5340-01-706-6344
Dust And Moisture Seal Protective Cover

017066344
62296-1: RNCC: 3 | RNVC: 2

9 Dec 2022

5340-01-706-8247
Test Plug Assembly

017068247
722-8217294-A16: RNCC: 3 | RNVC: 2
H861-7010-A16: RNCC: C | RNVC: 1

21 Dec 2022

5340-01-706-8176
Angle Bracket

017068176
8283258: RNCC: 3 | RNVC: 2

21 Dec 2022

5340-01-706-7878
Dust And Moisture Seal Protective Cover

017067878
5459211: RNCC: 3 | RNVC: 2

19 Dec 2022

5340-01-707-0655
Angle Bracket

017070655
SRPV2200388-113: RNCC: 3 | RNVC: 2

12 Jan 2023

5340-01-707-0472
Mounting Plate

017070472
4106AS0104-1: RNCC: 3 | RNVC: 2
4106AS0104-1: RNCC: 5 | RNVC: 2
4106AS0104: RNCC: D | RNVC: 9

11 Jan 2023

5340-01-707-0349
Retaining Strap

017070349
4W19088-105A: RNCC: 3 | RNVC: 2
4W19088: RNCC: D | RNVC: 9

11 Jan 2023

5340-01-708-7510
Angle Bracket

017087510
AB954-ANGLE: RNCC: 3 | RNVC: 2

20 Apr 2023

5340-01-708-7419
Double Angle Bracket

017087419
12638728-T: RNCC: 3 | RNVC: 2
12638728: RNCC: D | RNVC: 9

20 Apr 2023

5340-01-708-7394
Double Angle Bracket

017087394
12638947-T: RNCC: 3 | RNVC: 2
12638947: RNCC: D | RNVC: 9

20 Apr 2023

5340-01-705-8444
Mounting Bracket

017058444
12605809: RNCC: 3 | RNVC: 2
12605809: RNCC: 5 | RNVC: 1

17 Oct 2022

5340-01-708-6729
Assembled Nut Retainer

017086729
18-0003-1: RNCC: 3 | RNVC: 2
18-0003: RNCC: D | RNVC: 9

17 Apr 2023

5340-01-705-9261
Mounting Plate

017059261
9-2-6342: RNCC: 3 | RNVC: 2

21 Oct 2022

5340-01-707-1139
Loop Clamp

017071139
9NG0012H29F: RNCC: 3 | RNVC: 2
TA0220055HO29FK: RNCC: 5 | RNVC: 2
40005SS29FS: RNCC: 5 | RNVC: 2
9NG0012: RNCC: D | RNVC: 9

18 Jan 2023

5340-01-708-4484
Mounting Bracket

017084484
A1-55284D: RNCC: 3 | RNVC: 2

6 Apr 2023

5340-01-705-6737
Manual Control Handle

017056737
17950H: RNCC: 3 | RNVC: 2

4 Oct 2022

5340-01-707-1004
Angle Bracket

017071004
326P1S8013-201: RNCC: 3 | RNVC: 2

17 Jan 2023

5340-01-706-9635
Loop Clamp

017069635
9NG0012D16NB: RNCC: 3 | RNVC: 2
40005D16Y: RNCC: 5 | RNVC: 2
TA0220055DC16NB: RNCC: 5 | RNVC: 2
9NG0012: RNCC: D | RNVC: 9

5 Jan 2023

5340-01-705-7438
Utility Access Door

017057438
100AFP-10154-TAN: RNCC: 3 | RNVC: 2

7 Oct 2022

5340-01-706-9001
Bow Handle

017069001
PH-0274: RNCC: 3 | RNVC: 2
PH-0274: RNCC: 5 | RNVC: 9
17-60212: RNCC: 7 | RNVC: 2

30 Dec 2022

5340-01-706-8771
Mounting Plate

017068771
12680570: RNCC: 3 | RNVC: 2

28 Dec 2022

5340-01-705-7098
Section Block Clamp

017057098
NGC500EG-5B14: RNCC: 3 | RNVC: 2
NGC500EG-5B14: RNCC: 5 | RNVC: 2
NGC500EG-5B14: RNCC: 5 | RNVC: 2
NGC500EG: RNCC: D | RNVC: 9

5 Oct 2022

5340-01-705-7010
Snap Hook

017057010
31165T48: RNCC: 3 | RNVC: 2
11B5190790: RNCC: 7 | RNVC: 2

5 Oct 2022

5340-01-706-8548
Retaining Clip

017068548
7082810: RNCC: 3 | RNVC: 2

23 Dec 2022

5340-01-708-1282
Access Cover

017081282
5-13-10069-1: RNCC: 3 | RNVC: 2
5-13-10069: RNCC: D | RNVC: 9

16 Mar 2023

5340-01-708-1257
Double Angle Bracket

017081257
NWA0045: RNCC: 3 | RNVC: 2

16 Mar 2023

5340-01-705-7012
Section Block Clamp

017057012
NGC500EG-4A2: RNCC: 3 | RNVC: 2
NGC500EG-4A2: RNCC: 5 | RNVC: 2
NGC500EG-4A2: RNCC: 5 | RNVC: 2
NGC500EG: RNCC: D | RNVC: 9

5 Oct 2022

5340-01-705-5098
Mounting Bracket

017055098
70436-41103-10: RNCC: 3 | RNVC: 2

22 Sep 2022

5340-01-705-5095
Mounting Bracket

017055095
A3417315-1: RNCC: 3 | RNVC: 2

22 Sep 2022

5340-01-705-8029
Access Cover

017058029
12608629: RNCC: 3 | RNVC: 2
12608629: RNCC: 5 | RNVC: 1

13 Oct 2022

5340-01-705-7681
Access Cover

017057681
13056472: RNCC: 3 | RNVC: 2

11 Oct 2022

5340-01-708-3802
Vent Plug

017083802
PMF100600: RNCC: 3 | RNVC: 2
13074082: RNCC: 7 | RNVC: 2

3 Apr 2023

5340-01-705-7649
Loop Clamp

017057649
9NG0012D20F: RNCC: 3 | RNVC: 2
TA0220055DC20FK: RNCC: 5 | RNVC: 2
40005D20FS: RNCC: 5 | RNVC: 2
9NG0012: RNCC: D | RNVC: 9

11 Oct 2022

5340-01-707-0116
Retaining Strap

017070116
4W19088-106A: RNCC: 3 | RNVC: 2
4W19088: RNCC: D | RNVC: 9

10 Jan 2023

5340-01-708-6887
Bumper

017086887
751-7072317-PN-6: RNCC: 3 | RNVC: 2
7072363-1: RNCC: C | RNVC: 1
7072317: RNCC: D | RNVC: 9

17 Apr 2023

5340-01-705-7443
Utility Access Door

017057443
100AFP-10154-GRN: RNCC: 3 | RNVC: 2

7 Oct 2022

5340-01-708-2147
Block Clamp

017082147
7-611830051-101: RNCC: 3 | RNVC: 2

22 Mar 2023

5340-01-705-7197
Extension Handle

017057197
0201355.3: RNCC: 3 | RNVC: 2
11B5091882: RNCC: 7 | RNVC: 2

6 Oct 2022

5340-01-707-2588
Multiple Angle Bracket

017072588
13034713-2: RNCC: 3 | RNVC: 2
13034713: RNCC: D | RNVC: 9

25 Jan 2023

5340-01-706-0034
Mounting Bracket

017060034
9-2-7756-2: RNCC: 3 | RNVC: 2

24 Oct 2022

5340-01-707-2337
Loop Clamp

017072337
30-302-2D07J16: RNCC: 3 | RNVC: 2
30-302-2D07J16: RNCC: 5 | RNVC: 2
30-302-2D07J16: RNCC: 5 | RNVC: 2
30-302-2D07J16: RNCC: 5 | RNVC: 2
30-302-2D07J16: RNCC: 5 | RNVC: 2

24 Jan 2023

5340-01-709-0045
Multiple Angle Bracket

017090045
12423293: RNCC: 3 | RNVC: 2

4 May 2023

5340-01-707-2115
Manual Control Lever

017072115
T066195ASBLY: RNCC: 3 | RNVC: 2

23 Jan 2023

5340-01-707-1859
Angle Bracket

017071859
326P1S0629-103: RNCC: 3 | RNVC: 2

20 Jan 2023

5340-01-708-9446
Access Cover

017089446
HAN 662-1: RNCC: 3 | RNVC: 2

2 May 2023

5340-01-708-9177
Mounting Plate

017089177
284323-01: RNCC: 3 | RNVC: 2
284323-01: RNCC: 5 | RNVC: 2
284323: RNCC: D | RNVC: 9

1 May 2023

5340-01-705-9988
Retaining Strap

017059988
4936A16H01: RNCC: 3 | RNVC: 1

24 Oct 2022

5340-01-705-9358
Mechanic Equipment Hardware Kit

017059358
57K9496: RNCC: 3 | RNVC: 2

22 Oct 2022

5340-00-257-0046
Loop Clamp

002570046
3038-9012PC7: RNCC: 3 | RNVC: 2
140-31: RNCC: 3 | RNVC: 2
CPC1949-7: RNCC: 3 | RNVC: 2
102302G6: RNCC: 5 | RNVC: 2
102302GP6: RNCC: 5 | RNVC: 2
3038-9012PC7: RNCC: 5 | RNVC: 2
50MM612-5: RNCC: 5 | RNVC: 9
50MM612-5: RNCC: 5 | RNVC: 9
CPC742-7: RNCC: 5 | RNVC: 9
N1-7: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-706-0563
Mounting Plate

017060563
7378035: RNCC: 3 | RNVC: 2

27 Oct 2022

5340-01-706-0379
Plug Button

017060379
8-1075: RNCC: 3 | RNVC: 2
5613-638-001 REV I SHT9 ITEM 19A: RNCC: 5 | RNVC: 1
121-3460-TB ITEM 19: RNCC: C | RNVC: 1
121-3460-TB: RNCC: D | RNVC: 9
5613-638-001 REV I: RNCC: D | RNVC: 9

26 Oct 2022

5340-01-707-2885
Universal Adjustable Chock

017072885
4166AS0527-01: RNCC: 3 | RNVC: 2
4166AS0527-01: RNCC: 5 | RNVC: 2
4166AS0527: RNCC: D | RNVC: 9

26 Jan 2023

5340-01-707-2762
Mechanic Equipment Hardware Kit

017072762
80-3901: RNCC: 3 | RNVC: 2

25 Jan 2023

5340-01-706-0251
Extension Drawer Slide

017060251
CAE047460: RNCC: 3 | RNVC: 2
280921 ITEM 25: RNCC: C | RNVC: 1
PL280921-04: RNCC: D | RNVC: 9

26 Oct 2022

5340-01-707-2678
Dust And Moisture Seal Boot

017072678
809B060-3: RNCC: 3 | RNVC: 2

25 Jan 2023

5340-01-706-0551
Mounting Bracket

017060551
7378026: RNCC: 3 | RNVC: 2

27 Oct 2022

5340-01-706-0323
Mounting Bracket

017060323
12610961: RNCC: 3 | RNVC: 2
12610961: RNCC: 3 | RNVC: 2

26 Oct 2022

5340-00-013-7703
Angle Bracket

000137703
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-066: RNCC: 3 | RNVC: 2
MS9592-066: RNCC: 5 | RNVC: 9

10 May 1968

5340-00-005-0539
Loop Clamp

000050539
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D26NH: RNCC: 3 | RNVC: 2
MS9352-25: RNCC: 5 | RNVC: 9

19 Jun 1972

NSN 5340-00-143-0515 001430515 PLATE,MENDING

5340-00-143-0515
Mending Plate

001430515
SAE-AS9552: RNCC: 3 | RNVC: 1
MS9552-110: RNCC: 3 | RNVC: 2
MS9552-110: RNCC: 5 | RNVC: 9

18 Oct 1968

5340-00-013-7735
Loop Clamp

000137735
MS9350-07: RNCC: 2 | RNVC: 2
MS9350: RNCC: 4 | RNVC: 1

10 May 1968

5340-00-000-0058
Door Closer

000000058
BHMA-A156.4: RNCC: 3 | RNVC: 1
BHMA-A156.4 C02012 SIZE 3: RNCC: 3 | RNVC: 2
FF-H-121: RNCC: 5 | RNVC: 1
A156-4 TYPE C02012 SIZE 3: RNCC: 5 | RNVC: 9
A156.4 TYPE C02 012 SIZE 3: RNCC: C | RNVC: 1
ANSI A156-4 TYP E C02012 SIZE3: RNCC: C | RNVC: 1

17 Dec 1975

5340-01-344-3364
Butt Hinge

013443364
MS20001P12-2400: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

27 Aug 1991

5340-00-200-5936
Loop Clamp

002005936
54B7259H01: RNCC: 3 | RNVC: 2
CVC846-2: RNCC: 3 | RNVC: 2
8176971: RNCC: 3 | RNVC: 2
54B7259H01: RNCC: 5 | RNVC: 2
CVC846PT2: RNCC: 5 | RNVC: 2
918308-1: RNCC: 5 | RNVC: 2
242-21068-1: RNCC: 5 | RNVC: 9
1-8-6T: RNCC: 5 | RNVC: 9
F6TL-125WT: RNCC: 5 | RNVC: 9
6PTT6-2: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-069-1974
Headless Straight Rod

000691974
AA55590-8C: RNCC: 2 | RNVC: 2
A-A-55590: RNCC: 4 | RNVC: 1
MS27990-10C: RNCC: 5 | RNVC: 9
MS27990-2C: RNCC: 5 | RNVC: 9
S121873-091-4-4: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-200-2997
Loop Clamp

002002997
SAE-AS5587: RNCC: 3 | RNVC: 1
AS5587D4: RNCC: 3 | RNVC: 2
C8603ANDTYPE1ANDCLASSA: RNCC: 5 | RNVC: 9
AS5587D4: RNCC: 5 | RNVC: 9
AN742D4: RNCC: 5 | RNVC: 9
5340PL0839301: RNCC: 6 | RNVC: 9
9M144-4D: RNCC: C | RNVC: 1
9M144-4D: RNCC: C | RNVC: 1
9M144-4D: RNCC: C | RNVC: 1
9M144-4D: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-068-0535
Rod End Clevis

000680535
MS21252-6RS: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1
MS21252-6RS: RNCC: 5 | RNVC: 1
MS21252-6RS: RNCC: 5 | RNVC: 1
MS21252-6RS: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-067-9877
Turnbuckle Body

000679877
MS21251-5S: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-176-6117
Spacing Threaded Standoff

001766117
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C3A06: RNCC: 3 | RNVC: 2
NAS1786C02-6: RNCC: 5 | RNVC: 9
9336C5050-3: RNCC: 5 | RNVC: 9
9336C5050-3: RNCC: 5 | RNVC: 9
8104-SS-0256-7: RNCC: 5 | RNVC: 9
40-00530-025: RNCC: C | RNVC: 1
8104-SS-0256-7: RNCC: C | RNVC: 1

19 Dec 1969

5340-00-193-0119
Loop Clamp

001930119
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735D56: RNCC: 3 | RNVC: 2
AN735D56: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-217-9575
Helical Compression Spring Seat

002179575
1807A1: RNCC: 3 | RNVC: 2
1807A1: RNCC: 5 | RNVC: 2
31266: RNCC: 5 | RNVC: 2
5540E9074: RNCC: 5 | RNVC: 2
53620: RNCC: 5 | RNVC: 2
0231870-00: RNCC: 5 | RNVC: 2
53620: RNCC: 5 | RNVC: 9
353MAA1: RNCC: 5 | RNVC: 9
BG26193: RNCC: 5 | RNVC: 9
14934: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-079-8610
Loop Clamp

000798610
A52415-3: RNCC: 2 | RNVC: 2
A-A-52415: RNCC: 4 | RNVC: 1
MS53041-3: RNCC: 5 | RNVC: 9

6 Dec 1967

5340-00-150-2644
Spring Tension Clip

001502644
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B038-04C: RNCC: 3 | RNVC: 2

15 Jul 1970

5340-00-240-2298
Barrel Bolt

002402298
BHMA-A156.16: RNCC: 3 | RNVC: 1
BHMA-A156.16 L84212 5IN: RNCC: 3 | RNVC: 2
0923: RNCC: 5 | RNVC: 9
ANSIA156.16TYL84212(5IN): RNCC: 5 | RNVC: 9
A-A-466 TY 2 6 IN. LG: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-110-5095
Spacing Threaded Standoff

001105095
11830720-1: RNCC: 3 | RNVC: 2
10236960-1: RNCC: 5 | RNVC: 2
9739SS0632-7: RNCC: 5 | RNVC: 9
9739SS0632-0632-7: RNCC: 5 | RNVC: 9
660438-55: RNCC: 5 | RNVC: 9
11830720: RNCC: 5 | RNVC: 9
P791003203: RNCC: 5 | RNVC: 9
P7910032: RNCC: 5 | RNVC: 9
600055P158: RNCC: 7 | RNVC: 2
13217272-46: RNCC: 7 | RNVC: 9

14 Aug 1968

5340-00-071-3831
Dust And Moisture Seal Protective Cap

000713831
5657-4: RNCC: 3 | RNVC: 2
19166P11: RNCC: 5 | RNVC: 2
2HA863: RNCC: 5 | RNVC: 2
C71-PNC-6: RNCC: 5 | RNVC: 2
5657-4: RNCC: 5 | RNVC: 2
1950144: RNCC: 5 | RNVC: 2
13211E4930: RNCC: 5 | RNVC: 2
5657-4: RNCC: 5 | RNVC: 9
251425: RNCC: 5 | RNVC: 9
251425: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-194-4265
Loop Clamp

001944265
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735D16: RNCC: 3 | RNVC: 2
LS4605-1-16: RNCC: 5 | RNVC: 1
AN735D16: RNCC: 5 | RNVC: 2
AN735D16: RNCC: 5 | RNVC: 9
10117288: RNCC: 6 | RNVC: 9
5340001944265: RNCC: 6 | RNVC: 9
5340PL0852903: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-103-7746
Loop Clamp

001037746
044295-2: RNCC: 1 | RNVC: 2
SMA858645: RNCC: 3 | RNVC: 2
998818-9: RNCC: 3 | RNVC: 2
F2NY-187BK: RNCC: 3 | RNVC: 2
12310296-1: RNCC: 3 | RNVC: 2
GC500G3A: RNCC: 3 | RNVC: 2
F2NY-187-0: RNCC: 3 | RNVC: 2
3-16-2: RNCC: 3 | RNVC: 2
211-008-9013: RNCC: 5 | RNVC: 1
134053-005: RNCC: 5 | RNVC: 2

12 Jun 1968

5340-00-103-6663
Loop Clamp

001036663
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D6-12S: RNCC: 3 | RNVC: 2
10117253: RNCC: 6 | RNVC: 9

19 Jun 1968

5340-00-170-1905
Angle Bracket

001701905
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-186: RNCC: 3 | RNVC: 2
MS9593-186: RNCC: 5 | RNVC: 9
MS9601-186: RNCC: 5 | RNVC: 9
AS9593-186: RNCC: 5 | RNVC: 9

14 Feb 1973

5340-00-097-6364
Angle Bracket

000976364
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-006: RNCC: 3 | RNVC: 2
MS9593-006: RNCC: 5 | RNVC: 9

29 May 1968

5340-00-150-2614
Loop Clamp

001502614
NAS1397: RNCC: 3 | RNVC: 1
NAS1397K2EN: RNCC: 3 | RNVC: 2
NAS1397K2N: RNCC: 5 | RNVC: 9

17 Jun 1970

5340-00-240-2602
Tee Hinge

002402602
MS27970-2: RNCC: 2 | RNVC: 2
904RBP: RNCC: 5 | RNVC: 1
BHMA-A156.20: RNCC: 5 | RNVC: 1
904RBP: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-054-1412
Expansion Plug

000541412
A52420-14: RNCC: 2 | RNVC: 2
A-A-52420: RNCC: 4 | RNVC: 1
9040497: RNCC: 5 | RNVC: 9
MS35648-14: RNCC: 5 | RNVC: 9
114564GM: RNCC: 5 | RNVC: 9
29565D: RNCC: 5 | RNVC: 9
114564: RNCC: 5 | RNVC: 9
515134A: RNCC: 5 | RNVC: 9
019-29: RNCC: 5 | RNVC: 9
5340000541412: RNCC: 5 | RNVC: 9

1 Jan 1961

5340-01-454-4950
Webbing Strap

014544950
NAS1212: RNCC: 3 | RNVC: 1
NAS1212R15CJ130: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-01-579-4368
Retaining Clip

015794368
6V1228: RNCC: 3 | RNVC: 2
6V-1228: RNCC: 5 | RNVC: 2

12 Nov 2009

5340-00-237-6227
Loop Clamp

002376227
NASM21334: RNCC: 3 | RNVC: 1
MS21334-11: RNCC: 3 | RNVC: 2
MS21334-11: RNCC: 5 | RNVC: 9

4 Nov 1970

5340-00-200-8637
Dust And Moisture Seal Protective Plug

002008637
P42: RNCC: 3 | RNVC: 2
172-30: RNCC: 5 | RNVC: 2
RA3540-2: RNCC: 5 | RNVC: 2
61560: RNCC: 5 | RNVC: 2
4400512: RNCC: 5 | RNVC: 2
U400512: RNCC: 5 | RNVC: 2
P42: RNCC: 5 | RNVC: 2
78261: RNCC: 5 | RNVC: 2
74537-3: RNCC: 5 | RNVC: 2
17KP733: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-186-3396
Loop Clamp

001863396
AN742D34: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-231-2666
Butt Hinge

002312666
AA50432TY7,CLIIISTA2.5X2.5 1.25: RNCC: 2 | RNVC: 2
A-A-50432: RNCC: 4 | RNVC: 1
MILH1237: RNCC: 5 | RNVC: 9
AA50432 TYVII, CLIII STA 2.5X2.5: RNCC: 5 | RNVC: 9
SERIES 7000: RNCC: E | RNVC: 8
1808BSS: RNCC: E | RNVC: 8
1056AS107: RNCC: E | RNVC: 8

1 Jan 1963

5340-00-326-5351
Clamp Bolt Assembly

003265351
M85731/1-6CP: RNCC: 2 | RNVC: 2
MIL-DTL-85731/1: RNCC: 4 | RNVC: 1
ST9M454-4-2CP: RNCC: 5 | RNVC: 1
500017CP: RNCC: 5 | RNVC: 9
MIL-F-85731/1: RNCC: 5 | RNVC: 9
MS14108-6CP: RNCC: 5 | RNVC: 9
500017-4-2CP: RNCC: 5 | RNVC: 9
10117337: RNCC: 6 | RNVC: 9

3 Dec 1973

5340-00-282-7544
Loop Clamp

002827544
NASM21333: RNCC: 3 | RNVC: 1
MS21333-35: RNCC: 3 | RNVC: 2
MS21333-35: RNCC: 5 | RNVC: 9
X5-25301: RNCC: 5 | RNVC: 9
5340002827544: RNCC: 5 | RNVC: 9
5340002827544: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-275-2879
Loop Clamp

002752879
NAS1397: RNCC: 3 | RNVC: 1
NAS1397K12N: RNCC: 3 | RNVC: 2

8 Aug 1973

5340-00-188-0333
Turnbuckle

001880333
ASTM-F1145: RNCC: 3 | RNVC: 1
ASTM-F1145-I1G 1/2X12: RNCC: 3 | RNVC: 2
F1145: RNCC: 5 | RNVC: 9
FF-T-791: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-237-6254
Catch Strike

002376254
MS18015-3: RNCC: 2 | RNVC: 2
MS18015: RNCC: 4 | RNVC: 1
5860233-2: RNCC: 5 | RNVC: 1
6736831-2: RNCC: 5 | RNVC: 1
5340002376254: RNCC: 6 | RNVC: 9
821998.01: RNCC: C | RNVC: 1
6736831-2: RNCC: C | RNVC: 1
A3155294: RNCC: C | RNVC: 1

28 Oct 1970

5340-00-358-5711
Loop Clamp

003585711
L5780-2: RNCC: 3 | RNVC: 2
X28: RNCC: 3 | RNVC: 2
1603365: RNCC: 3 | RNVC: 2
T10801: RNCC: 3 | RNVC: 2
17420C6: RNCC: 3 | RNVC: 2
170571R91: RNCC: 3 | RNVC: 2
65167R1: RNCC: 3 | RNVC: 2
X250: RNCC: 5 | RNVC: 2
34212: RNCC: 5 | RNVC: 2
30372: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-340-5082
Spring Tension Clip

003405082
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-230: RNCC: 3 | RNVC: 2
M24066/2230: RNCC: 5 | RNVC: 9
NASM24066/2: RNCC: 5 | RNVC: 9
M24066/2-030: RNCC: C | RNVC: 1
MIL-C-24066/2-230: RNCC: E | RNVC: 8
MIL-C-24066: RNCC: E | RNVC: 8

6 Jan 1974

5340-00-333-6056
Strap End Clip

003336056
MS51926-1: RNCC: 2 | RNVC: 2
MIL-C-496: RNCC: 4 | RNVC: 1
149-5-8: RNCC: 5 | RNVC: 1
SP233-5-8: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-291-5294
Loop Clamp

002915294
34-726-3: RNCC: 3 | RNVC: 2
37B3586: RNCC: 3 | RNVC: 2
742-5: RNCC: 3 | RNVC: 2
A653-56: RNCC: 3 | RNVC: 2
CPC742-5: RNCC: 3 | RNVC: 2
833: RNCC: 3 | RNVC: 2
SMB179292: RNCC: 5 | RNVC: 9
833: RNCC: 5 | RNVC: 9
54-4775-4: RNCC: 5 | RNVC: 9
7002308P4: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-291-4206
Padlock Set

002914206
AA59486-1IB90: RNCC: 2 | RNVC: 2
A-A-59486: RNCC: 4 | RNVC: 1
MS21313-121: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-290-7273
Loop Clamp

002907273
12Z7003-6331: RNCC: 2 | RNVC: 2
990438-11: RNCC: 5 | RNVC: 1
094434-0000: RNCC: 5 | RNVC: 1
540201-012: RNCC: 5 | RNVC: 1
107219-32: RNCC: 5 | RNVC: 1
108363-11: RNCC: 5 | RNVC: 1
950142-21: RNCC: 5 | RNVC: 1
907747-11: RNCC: 5 | RNVC: 2
3/4-6: RNCC: 5 | RNVC: 9
F6NY-750BL: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-285-6754
Loop Clamp

002856754
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735-5: RNCC: 3 | RNVC: 2
AN735-5: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-286-9421
Loop Clamp

002869421
SAE-AS21919: RNCC: 3 | RNVC: 1
AS21919WDG13: RNCC: 3 | RNVC: 2
AS21919WDG13: RNCC: 3 | RNVC: 9
AS21919WDG13: RNCC: 5 | RNVC: 1
821VN0623: RNCC: 5 | RNVC: 2
3696440116: RNCC: 5 | RNVC: 2
MS21919WDG13: RNCC: 5 | RNVC: 2
AS21919WDG13: RNCC: 5 | RNVC: 9
TA1718WD13X: RNCC: 5 | RNVC: 9
MS21919WDG13: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-279-4333
Loop Clamp

002794333
SAE-AS9349: RNCC: 3 | RNVC: 1
MS9349-11: RNCC: 3 | RNVC: 2
MS9349-11: RNCC: 3 | RNVC: 9
MS9349-11: RNCC: 5 | RNVC: 9

19 Aug 1973

5340-01-454-9235
Angle Bracket

014549235
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-220: RNCC: 3 | RNVC: 2
MS9592-220: RNCC: 3 | RNVC: 9
AS9592/MS9592-220: RNCC: 5 | RNVC: 1
MS9592-220: RNCC: 5 | RNVC: 9
AS9592/MS9592-220: RNCC: 5 | RNVC: 9

16 Apr 1998

5340-00-556-7078
Spring Tension Clip

005567078
NASM24066/3: RNCC: 3 | RNVC: 1
M24066/3-005: RNCC: 3 | RNVC: 2
6002-107CC: RNCC: 5 | RNVC: 1
100-300-7-3: RNCC: 5 | RNVC: 9
6002-107CC: RNCC: 5 | RNVC: 9
MILC24066: RNCC: 5 | RNVC: 9
M24066/3-005: RNCC: 5 | RNVC: 9
457-5696: RNCC: 6 | RNVC: 9

8 Nov 1974

5340-00-433-3561
Angle Bracket

004333561
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-227: RNCC: 3 | RNVC: 2
MS9592-227: RNCC: 5 | RNVC: 9

17 Aug 1970

5340-00-598-8253
Angle Bracket

005988253
SAE-AS7431: RNCC: 3 | RNVC: 1
AN743-11: RNCC: 3 | RNVC: 2
AN743-11: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-484-8772
Rod End Locking Retainer

004848772
NAS1193: RNCC: 3 | RNVC: 1
NAS1193K12C: RNCC: 3 | RNVC: 2
NAS1193K12: RNCC: 5 | RNVC: 2
10117375: RNCC: 6 | RNVC: 9

14 Jun 1974

5340-00-530-6489
Loop Clamp

005306489
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735-21: RNCC: 3 | RNVC: 2
21C2205-029: RNCC: 5 | RNVC: 1
AN735-21: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-406-3683
Strap Fastener Loop

004063683
NAS1211: RNCC: 3 | RNVC: 1
NAS1211C20: RNCC: 3 | RNVC: 2

13 Apr 1970

5340-00-595-6340
Loop Clamp

005956340
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D22NH: RNCC: 3 | RNVC: 2
MS9352-21: RNCC: 5 | RNVC: 9
NAS1715-22: RNCC: 5 | RNVC: 9
10086649: RNCC: 6 | RNVC: 9

10 Jan 1975

5340-00-484-9796
Loop Clamp

004849796
SAE-AS9349: RNCC: 3 | RNVC: 1
MS9349-02: RNCC: 3 | RNVC: 2
MS9349-02: RNCC: 3 | RNVC: 9
MS9349-02: RNCC: 5 | RNVC: 9

23 Sep 1970

5340-00-482-1707
Electrical-Mechanical Equipment Post

004821707
2108-440-SS-20: RNCC: 3 | RNVC: 2
8218SS0440: RNCC: 3 | RNVC: 2
8218SS0440-7: RNCC: 3 | RNVC: 2
SS-6951-0440-0.750-01: RNCC: 3 | RNVC: 2
1921C: RNCC: 5 | RNVC: 2
2494695-1: RNCC: 5 | RNVC: 2
1120H-SS-.750-12: RNCC: 5 | RNVC: 2
610079P10: RNCC: 5 | RNVC: 2
8218SS0440-7: RNCC: 5 | RNVC: 9
ES5222-5: RNCC: 5 | RNVC: 9

23 Sep 1970

5340-00-408-5955
Electrical-Mechanical Equipment Post

004085955
NAS1831: RNCC: 3 | RNVC: 1
8576-A-0832: RNCC: 3 | RNVC: 2
NAS1831A6D12: RNCC: 3 | RNVC: 2
2515250-12: RNCC: 5 | RNVC: 2
210-1004P14: RNCC: 5 | RNVC: 2
8576A0832-1B: RNCC: 5 | RNVC: 9
8576-A-0832-1: RNCC: 5 | RNVC: 9
8576A0832-1B: RNCC: C | RNVC: 1
8576-A-0832-1: RNCC: C | RNVC: 1

20 Jul 1970

5340-00-598-9246
Turnbuckle

005989246
ASTM-F1145: RNCC: 3 | RNVC: 1
ASTM-F1145-I1F 1/2X9: RNCC: 3 | RNVC: 2
ASTM F1145 TY 1 FM 1 CL 6: RNCC: 3 | RNVC: 9
ASTM F1145 TY 1 FM 1 CL 6: RNCC: 5 | RNVC: 9
FF-T-791: RNCC: 5 | RNVC: 9
X3156: RNCC: 5 | RNVC: 9
BR126: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-543-3931
Loop Clamp

005433931
SAE-AS25281: RNCC: 3 | RNVC: 1
MS25281-R3: RNCC: 3 | RNVC: 2
MS25281-R3: RNCC: 3 | RNVC: 9
946286-4003: RNCC: 5 | RNVC: 2
C1141N-3: RNCC: 5 | RNVC: 2
54B7259H02: RNCC: 5 | RNVC: 2
C1141N-3: RNCC: 5 | RNVC: 2
447273-2: RNCC: 5 | RNVC: 2
5340005433931: RNCC: 5 | RNVC: 9
CL141N-3: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-570-0435
Loop Clamp

005700435
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C3K: RNCC: 3 | RNVC: 2
NAS1715C3K: RNCC: 5 | RNVC: 1

1 Dec 1974

5340-00-527-1185
Retaining Strap

005271185
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C14W38N: RNCC: 3 | RNVC: 2

28 Aug 1974

5340-01-596-1554
Retaining Clip

015961554
1043173: RNCC: 3 | RNVC: 2
104-3173: RNCC: 3 | RNVC: 2
A06794: RNCC: 5 | RNVC: 2
104-3173: RNCC: 5 | RNVC: 9

13 May 2011

5340-00-480-8862
Retaining Strap

004808862
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D20W62N: RNCC: 3 | RNVC: 2

14 Jun 1974

5340-00-515-1155
Bail Handle

005151155
8537452: RNCC: 1 | RNVC: 2
517875-1: RNCC: 3 | RNVC: 2
7415440P1: RNCC: 3 | RNVC: 9
QB76881-1: RNCC: 5 | RNVC: 2
8537452: RNCC: 5 | RNVC: 2
518645-1: RNCC: 5 | RNVC: 9
PE420100001F1: RNCC: 5 | RNVC: 9
518645: RNCC: 5 | RNVC: 9
8537452: RNCC: 5 | RNVC: 9
12Z12009-46: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-595-6208
Loop Clamp

005956208
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D6-13N: RNCC: 3 | RNVC: 2

10 Jan 1975

5340-00-531-6856
Loop Clamp

005316856
SAE-AS5587: RNCC: 3 | RNVC: 1
AS5587D03: RNCC: 3 | RNVC: 2
755-3: RNCC: 5 | RNVC: 1
C8603ANDTYPE1ANDCLASSA: RNCC: 5 | RNVC: 9
AS5587D03: RNCC: 5 | RNVC: 9
MS21103D3: RNCC: 5 | RNVC: 9
AN742D3: RNCC: 5 | RNVC: 9
10056454: RNCC: 6 | RNVC: 9
5340PL0727363: RNCC: 6 | RNVC: 9

1 Jan 1960

5340-00-598-0113
Loop Clamp

005980113
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C8N: RNCC: 3 | RNVC: 2
MS9024-07: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-446-5087
Synchro Clamp

004465087
L2-2: RNCC: 3 | RNVC: 2
8436862-2: RNCC: 5 | RNVC: 2
42356-10: RNCC: 5 | RNVC: 2
753004-002: RNCC: 5 | RNVC: 2
404-9177-001: RNCC: 5 | RNVC: 2
753004-2: RNCC: 5 | RNVC: 2
109148-1: RNCC: 5 | RNVC: 2
C10: RNCC: 5 | RNVC: 2
7900231-002: RNCC: 5 | RNVC: 9
5340004465087: RNCC: 5 | RNVC: 9

1 Jan 1961

5340-00-413-4775
Spacing Threaded Standoff

004134775
NAS1830: RNCC: 3 | RNVC: 1
NAS1830B14B04: RNCC: 3 | RNVC: 2
207848-005: RNCC: 3 | RNVC: 2
SC5340-0023-29: RNCC: 5 | RNVC: 9
9533BB0632-3: RNCC: 5 | RNVC: 9
9533BB0632-3: RNCC: C | RNVC: 1
350-7408-11-19: RNCC: C | RNVC: 1

8 May 1970

5340-00-597-9522
Loop Clamp

005979522
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C2N: RNCC: 3 | RNVC: 2
MS9024-01: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-596-7823
Mounting Plate

015967823
4982225: RNCC: 3 | RNVC: 2
C6136311431: RNCC: 5 | RNVC: 9

24 May 2011

5340-00-687-3224
Plug Button

006873224
NAS451: RNCC: 3 | RNVC: 1
NAS451-6: RNCC: 3 | RNVC: 2
NAS-451-6: RNCC: 3 | RNVC: 2
09A139-02: RNCC: 5 | RNVC: 2
9175685-1: RNCC: 5 | RNVC: 2
SS48192: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-771-0045
Sealing Plug Assembly

007710045
10630107-3: RNCC: 3 | RNVC: 2
PLGA2181010A: RNCC: 3 | RNVC: 2
GP525A7A: RNCC: 5 | RNVC: 2
2A: RNCC: 5 | RNVC: 2
649-052-012-0: RNCC: 5 | RNVC: 2
STD288-15: RNCC: 5 | RNVC: 2
ST7M141D7L: RNCC: 5 | RNVC: 2
PLGA2181010: RNCC: 5 | RNVC: 2
69662-2A: RNCC: 5 | RNVC: 2
S8-218101: RNCC: 5 | RNVC: 2

1 Jan 1962

5340-00-788-8480
Rod End Locking Retainer

007888480
NAS559: RNCC: 3 | RNVC: 1
NAS559-10: RNCC: 3 | RNVC: 2

1 Jan 1960

5340-01-360-4847
Mounting Bracket

013604847
4079745: RNCC: 3 | RNVC: 2
4078474: RNCC: 5 | RNVC: 2
5340PL1866867: RNCC: 6 | RNVC: 9

24 Jun 1992

5340-00-245-5321
Spring Tension Clip

002455321
NASM24066/4: RNCC: 3 | RNVC: 1
M24066/4-111: RNCC: 3 | RNVC: 2
MILC24066: RNCC: 5 | RNVC: 9
M24066/4-111: RNCC: 5 | RNVC: 9

9 Jan 1972

5340-01-037-0670
Pawl Fastener

010370670
CPR102312: RNCC: 1 | RNVC: 2
44-99-119-13: RNCC: 3 | RNVC: 2
CPR102312: RNCC: 5 | RNVC: 9
B403645932: RNCC: 5 | RNVC: 9
CPR102312: RNCC: 6 | RNVC: 9
5340010370670: RNCC: 6 | RNVC: 9

14 Mar 1977

5340-01-699-8775
Access Cover

016998775
334/G1822: RNCC: 3 | RNVC: 2

3 Mar 2022

5340-01-700-7849
Retaining Strap

017007849
601248-1: RNCC: 3 | RNVC: 2

13 Apr 2022

5340-01-706-3006
Bumper

017063006
9540K15: RNCC: 3 | RNVC: 2

15 Nov 2022

5340-01-689-9105
Angle Bracket

016899105
AS9592-387: RNCC: 3 | RNVC: 2
9682013410: RNCC: 5 | RNVC: 2
968.20.13.410: RNCC: 5 | RNVC: 9

16 Jul 2020

5340-01-700-3787
Rigid Connecting Link

017003787
104917: RNCC: 3 | RNVC: 2

25 Mar 2022

5340-01-691-2602
Dust And Moisture Seal Boot

016912602
77A562072P001: RNCC: 1 | RNVC: 2
77A562072P001: RNCC: 3 | RNVC: 2
77A562072P1: RNCC: 3 | RNVC: 2

30 Sep 2020

5340-01-698-7696
Dust And Moisture Seal Protective Cap

016987696
406-0024-017: RNCC: 3 | RNVC: 2

7 Dec 2021

5340-01-700-9298
Dust And Moisture Seal Protective Plug

017009298
92126: RNCC: 3 | RNVC: 9

20 Apr 2022

5340-00-840-3447
Retaining Strap

008403447
NASM21315: RNCC: 3 | RNVC: 1
MS21315-14: RNCC: 3 | RNVC: 2
FF-S-760: RNCC: 5 | RNVC: 9
MS21315-14: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-838-2787
Butt Hinge Leaf

008382787
MS20257HP4-7200: RNCC: 2 | RNVC: 2
MS20257: RNCC: 4 | RNVC: 1
023345627: RNCC: 5 | RNVC: 1
MS20257HP4-7200: RNCC: 5 | RNVC: 1
MS20257HP4-1000: RNCC: 5 | RNVC: 9
MS20257HP4-1650: RNCC: 5 | RNVC: 9
MS20257HP4-2742: RNCC: 5 | RNVC: 9
MS20257HP4-438: RNCC: 5 | RNVC: 9
MS20257HP4-700: RNCC: 5 | RNVC: 9
MS20257HP4-2: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-865-7404
Loop Clamp

008657404
MS9025-20: RNCC: 2 | RNVC: 2
MS9025: RNCC: 4 | RNVC: 1

1 Jan 1960

5340-00-840-3446
Retaining Strap

008403446
NASM21315: RNCC: 3 | RNVC: 1
MS21315-6: RNCC: 3 | RNVC: 2
MS21315-6: RNCC: 5 | RNVC: 9
FF-S-760: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-01-684-4486
Cover Retainer

016844486
810-038: RNCC: 3 | RNVC: 2
810-038/ 8324510 REV D: RNCC: 3 | RNVC: 2
810-038: RNCC: 3 | RNVC: 2
810-038: RNCC: 5 | RNVC: 2
810-038ED: RNCC: 5 | RNVC: 2
6914580/SHEET 5FIND 11ED: RNCC: 5 | RNVC: 2
6914580/SHEET 5FIND 11: RNCC: D | RNVC: 9

4 Nov 2019

5340-01-698-4122
Section Block Clamp

016984122
NGC500EG-5B6: RNCC: 3 | RNVC: 2
NGC500EG-5B6: RNCC: 5 | RNVC: 2
NGC500EG-5B6: RNCC: 5 | RNVC: 2
NGC500EG: RNCC: D | RNVC: 9

16 Nov 2021

5340-00-852-1413
Clamp Bolt Assembly

008521413
NAS573: RNCC: 3 | RNVC: 1
NAS573-5: RNCC: 3 | RNVC: 2

1 Jan 1960

5340-00-725-5267
Loop Clamp

007255267
NASM21333: RNCC: 3 | RNVC: 1
MS21333-115: RNCC: 3 | RNVC: 2
MS21333-115: RNCC: 5 | RNVC: 9
5340007255267: RNCC: 5 | RNVC: 9
5340PL1463616: RNCC: 6 | RNVC: 9

1 Jan 1961

5340-00-849-6906
Spring Tension Clip

008496906
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-050-10C: RNCC: 3 | RNVC: 2
6014-46A: RNCC: 5 | RNVC: 9
6014-46A: RNCC: C | RNVC: 1

9 Jan 1967

5340-01-418-6193
Loop Clamp

014186193
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C22M: RNCC: 3 | RNVC: 2
NAS1715C22Z: RNCC: 5 | RNVC: 1

31 Aug 1995

5340-00-815-2181
Loop Clamp

008152181
AN742H5: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
AN742H5: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-00-833-8510
Spring Tension Clip

008338510
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-036-06C: RNCC: 3 | RNVC: 2
947020-3606: RNCC: 5 | RNVC: 2
6001-79C: RNCC: 5 | RNVC: 9
6001-79C: RNCC: C | RNVC: 1
NAS1464-036-060: RNCC: C | RNVC: 1

15 Sep 1967

5340-00-801-3356
Loop Clamp

008013356
SAE-AS7351: RNCC: 3 | RNVC: 1
AN735D80: RNCC: 3 | RNVC: 2
AS7351D80: RNCC: 3 | RNVC: 9
AN735D80: RNCC: 5 | RNVC: 2
AS7351D80: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-835-3638
Spring Tension Clip

008353638
28: RNCC: 3 | RNVC: 2
500K2667: RNCC: 5 | RNVC: 2
12442234: RNCC: 5 | RNVC: 2
500K2667: RNCC: 5 | RNVC: 9
G316996: RNCC: 5 | RNVC: 9
28: RNCC: 5 | RNVC: 9
12421647-001: RNCC: 7 | RNVC: 2
4SE00300-7: RNCC: C | RNVC: 1

1 Jan 1962

5340-00-663-1970
Loop Clamp

006631970
AN742F3: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1
10117421: RNCC: 6 | RNVC: 9
5340PL0734749: RNCC: 6 | RNVC: 9
5340PL1867803: RNCC: 6 | RNVC: 9
MS21103-3: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-223-4179
Butt Hinge

002234179
MS27960-6: RNCC: 2 | RNVC: 2
BHMA A156.1: RNCC: 5 | RNVC: 1
02162: RNCC: 5 | RNVC: 1
MS527960-6: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-700-4168
Nut And Bolt Locking Plate

017004168
NK4483-1: RNCC: 3 | RNVC: 2
S-1133 PIECE 81: RNCC: C | RNVC: 1

28 Mar 2022

5340-01-701-2904
Dust And Moisture Seal Protective Plug

017012904
185-6046: RNCC: 3 | RNVC: 2

9 May 2022

5340-01-699-6747
Electronic Equipment Hardware Kit

016996747
500-818543-000: RNCC: 3 | RNVC: 2

17 Feb 2022

5340-00-804-1224
Dust And Moisture Seal Protective Plug

008041224
NAS836: RNCC: 3 | RNVC: 1
NAS836-3A: RNCC: 3 | RNVC: 2
M5501/1-3: RNCC: 5 | RNVC: 9
M5501/1-3 MOD 3/8 IN LG: RNCC: 5 | RNVC: 9
MILC5501TYPE3CLASSASIZE3: RNCC: 5 | RNVC: 9
SP-3ERA: RNCC: C | RNVC: 1
133B8544P1: RNCC: C | RNVC: 1
MIL-C-5501/1-3: RNCC: C | RNVC: 1
133B8544: RNCC: C | RNVC: 1

1 Jan 1962

5340-01-021-9614
Loop Clamp

010219614
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D28NH: RNCC: 3 | RNVC: 2
MS9352-27: RNCC: 5 | RNVC: 9

21 May 1976

5340-01-014-1217
Spacing Threaded Standoff

010141217
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C6E12: RNCC: 3 | RNVC: 2
8576-SS-1032-7: RNCC: 5 | RNVC: 9
8576SS1032: RNCC: 5 | RNVC: 9
10121962: RNCC: 6 | RNVC: 9
11437857-4: RNCC: 7 | RNVC: 1
8576SS1032-7: RNCC: C | RNVC: 1
NAS1831-6E12: RNCC: C | RNVC: 1

15 Dec 1975

5340-00-901-8105
Antipilferage Seal

009018105
F2738-C07-1-1-8.5: RNCC: 2 | RNVC: 2
FF-S-2738: RNCC: 4 | RNVC: 1
NFES-1938: RNCC: 5 | RNVC: 1
EC0N0MYCARSEAL: RNCC: 5 | RNVC: 1
FF-S-2738 STCTY7SZ8.5: RNCC: 5 | RNVC: 1
F2738-007-1-1-8.5: RNCC: 5 | RNVC: 9

1 Jan 1960

5340-01-004-8027
Mending Plate

010048027
SAE-AS9552: RNCC: 3 | RNVC: 1
MS9552-010: RNCC: 3 | RNVC: 2
MS9552-010: RNCC: 5 | RNVC: 9

15 Jun 1975

5340-00-998-0611
Loop Clamp

009980611
MS14171-F3: RNCC: 3 | RNVC: 2
MS14171-F3: RNCC: 3 | RNVC: 9
24659-0003: RNCC: 5 | RNVC: 2
MS25281F3: RNCC: 5 | RNVC: 9
5340009980611: RNCC: 5 | RNVC: 9
10117528: RNCC: 6 | RNVC: 9
5340PL0846452: RNCC: 6 | RNVC: 9
54B7259H02: RNCC: C | RNVC: 1
C10DK3: RNCC: C | RNVC: 1
MS25281-3F: RNCC: C | RNVC: 1

25 Nov 1966

5340-00-943-6047
Loop Clamp

009436047
NASM21322: RNCC: 3 | RNVC: 1
NASM21322-37: RNCC: 3 | RNVC: 2
MS21322-37: RNCC: 5 | RNVC: 9
MS21322-37: RNCC: 5 | RNVC: 9

25 Feb 1966

5340-00-952-5408
Loop Clamp

009525408
NAS1397: RNCC: 3 | RNVC: 1
5-86NA: RNCC: 3 | RNVC: 2
625-6-167: RNCC: 3 | RNVC: 2
NAS1397P10N: RNCC: 3 | RNVC: 2
8515467: RNCC: 3 | RNVC: 2
F6NY-624NAE: RNCC: 5 | RNVC: 2
835978: RNCC: 5 | RNVC: 9
5/8-6NAE: RNCC: 5 | RNVC: 9
5340009525408: RNCC: 5 | RNVC: 9
NAS1397R10B: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-928-9699
Angle Bracket

009289699
MS9102-13: RNCC: 2 | RNVC: 2
MS9102: RNCC: 4 | RNVC: 1

2 Sep 1966

5340-00-910-0014
Electronic Equipment Hardware Kit

009100014
65A139D43: RNCC: 1 | RNVC: 2
559997-047: RNCC: 3 | RNVC: 2
GK801AB2: RNCC: 5 | RNVC: 2
5L.5593.001.14: RNCC: 5 | RNVC: 2
EM-C0040-001: RNCC: 5 | RNVC: 2
1942543-1: RNCC: 5 | RNVC: 2
10237754: RNCC: 5 | RNVC: 2
1942543-1: RNCC: 5 | RNVC: 9
MS745: RNCC: 5 | RNVC: 9
MH745: RNCC: 5 | RNVC: 9

1 Jan 1960

5340-00-907-7799
Quick Release Plunger

009077799
SSB48N: RNCC: 3 | RNVC: 2
CL15SBP1: RNCC: 5 | RNVC: 2
10556141: RNCC: 5 | RNVC: 2
B48N: RNCC: 5 | RNVC: 9
H57036-009: RNCC: 5 | RNVC: 9
SSB48P: RNCC: 7 | RNVC: 2
990C980H01: RNCC: 7 | RNVC: 2
4990067-1: RNCC: 7 | RNVC: 9
11103: RNCC: C | RNVC: 1
2498415-001: RNCC: C | RNVC: 1

1 Jan 1960

5340-01-015-2253
Loop Clamp

010152253
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C5K: RNCC: 3 | RNVC: 2
NAS1715C5K: RNCC: 5 | RNVC: 1

16 Jan 1976

5340-00-964-2555
Loop Clamp

009642555
NAS1397: RNCC: 3 | RNVC: 1
NAS1397P6N: RNCC: 3 | RNVC: 2
5800332-9009-046: RNCC: 5 | RNVC: 2
2019100-0705: RNCC: 5 | RNVC: 2
A07738: RNCC: 5 | RNVC: 2
1771757-25: RNCC: 5 | RNVC: 2
C42107A56C948: RNCC: 5 | RNVC: 2
CCN-35: RNCC: 5 | RNVC: 9
5340009642555: RNCC: 5 | RNVC: 9
10138751: RNCC: 6 | RNVC: 9

1 Jan 1960

5340-01-014-0080
Spring Tension Clip

010140080
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-124: RNCC: 3 | RNVC: 2
M24066/2-124: RNCC: 5 | RNVC: 9
6014-63A: RNCC: 5 | RNVC: 9
MIL-C-24066/2: RNCC: 5 | RNVC: 9

12 Dec 1975

5340-00-889-8526
Spring Tension Clip

008898526
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-012-05C: RNCC: 3 | RNVC: 2
6182-9C: RNCC: 5 | RNVC: 9
6182-9C: RNCC: C | RNVC: 1

10 Apr 1968

5340-01-134-0294
Loop Clamp

011340294
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D14-28N: RNCC: 3 | RNVC: 2
10112656: RNCC: 6 | RNVC: 9

25 Jun 1982

5340-01-055-4199
Butt Hinge

010554199
AA55589-6C: RNCC: 2 | RNVC: 2
A-A-55589: RNCC: 4 | RNVC: 1
MS35821-6C: RNCC: 5 | RNVC: 1
MS35821-6C: RNCC: 5 | RNVC: 9
MS35821-1C: RNCC: 5 | RNVC: 9

4 Feb 1978

5340-01-010-2688
Retaining Strap

010102688
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D28-40N: RNCC: 3 | RNVC: 2

25 Sep 1975

5340-01-054-6085
Butt Hinge

010546085
AA55594-11A: RNCC: 2 | RNVC: 2
A-A-55594: RNCC: 4 | RNVC: 1
MS35829-11A: RNCC: 5 | RNVC: 1
MS35829-11A: RNCC: 5 | RNVC: 9

22 Jan 1978

5340-01-054-8654
Butt Hinge

010548654
AA55593-11A: RNCC: 2 | RNVC: 2
A-A-55593: RNCC: 4 | RNVC: 1
MS35826-11A: RNCC: 5 | RNVC: 1
A-A--55503A: RNCC: 5 | RNVC: 9
AA55593-11A-8400: RNCC: 5 | RNVC: 9
MS35826-11A: RNCC: 5 | RNVC: 9

27 Jan 1978

5340-01-054-6084
Butt Hinge

010546084
AA55595-11A: RNCC: 2 | RNVC: 2
A-A-55595: RNCC: 4 | RNVC: 1
MS35820-11A: RNCC: 5 | RNVC: 1
MS35830-11A: RNCC: 5 | RNVC: 9
271AS105-1: RNCC: 5 | RNVC: 9

22 Jan 1978

5340-01-006-9577
Loop Clamp

010069577
NASM21334: RNCC: 3 | RNVC: 1
MS21334-27: RNCC: 3 | RNVC: 2
MS21334-27: RNCC: 5 | RNVC: 9

24 Jul 1975

5340-01-053-7049
Angle Bracket

010537049
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-247: RNCC: 3 | RNVC: 2
MS9593-247: RNCC: 5 | RNVC: 9
MS9593-247: RNCC: 5 | RNVC: 9

9 Jan 1978

5340-01-044-3319
Sealing Plug Assembly

010443319
7052638-2: RNCC: 3 | RNVC: 2
576R929H07: RNCC: 5 | RNVC: 2
STD288-31: RNCC: 5 | RNVC: 2
P312737: RNCC: 5 | RNVC: 2
PLGA4061010A: RNCC: 5 | RNVC: 2
PLGA4061010: RNCC: 5 | RNVC: 9
STD288-31: RNCC: 5 | RNVC: 9
ST7M141D13L: RNCC: 5 | RNVC: 9
572-523-9107: RNCC: 5 | RNVC: 9
SP137B5: RNCC: 5 | RNVC: 9

10 Jul 1977

5340-01-137-3250
Loop Clamp

011373250
NASM21322: RNCC: 3 | RNVC: 1
MS21322-54: RNCC: 3 | RNVC: 2
MS21322-54: RNCC: 5 | RNVC: 9

25 Aug 1982

5340-01-135-9623
Webbing Strap

011359623
NAS1212: RNCC: 3 | RNVC: 1
NAS1212R10AJ120: RNCC: 3 | RNVC: 2

31 Jul 1982

5340-01-480-9599
Turnbuckle

014809599
MS51562-5Z: RNCC: 2 | RNVC: 2
FF-T-791: RNCC: 4 | RNVC: 1

13 Dec 2000

5340-01-618-7291
Mounting Plate

016187291
BL-16549-1: RNCC: 3 | RNVC: 2
BL16549-1: RNCC: 3 | RNVC: 2

3 May 2013

5340-00-993-4185
Dust And Moisture Seal Protective Cap

009934185
NAS847: RNCC: 3 | RNVC: 1
NAS844-14: RNCC: 3 | RNVC: 2
13-16SC: RNCC: 5 | RNVC: 9
MIL-C-5501/9: RNCC: 5 | RNVC: 9
7209541P014: RNCC: 5 | RNVC: 9
7209541P014: RNCC: 5 | RNVC: 9
M5501/9-F14: RNCC: 5 | RNVC: 9
13/16 SC X 7/8: RNCC: 5 | RNVC: 9
A3013089-3: RNCC: 5 | RNVC: 9
SC-13/16: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-040-3770
Loop Clamp

010403770
245-4363897PC25-8: RNCC: 3 | RNVC: 2
245-4363897PC20-8: RNCC: 5 | RNVC: 9

7 May 1977

5340-01-010-4535
Loop Clamp

010104535
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D12-28N: RNCC: 3 | RNVC: 2
10117534: RNCC: 6 | RNVC: 9

29 Sep 1975

5340-00-987-8829
Dust And Moisture Seal Boot

009878829
M5423/9-2: RNCC: 2 | RNVC: 2
MIL-DTL-5423/9: RNCC: 4 | RNVC: 1
324331-1: RNCC: 5 | RNVC: 1
N9033-1-4: RNCC: 5 | RNVC: 1
617882-9: RNCC: 5 | RNVC: 1
334-1272-000: RNCC: 5 | RNVC: 1
334-1272-000: RNCC: 5 | RNVC: 1
334-1272-00: RNCC: 5 | RNVC: 1
C5-15-4866: RNCC: 5 | RNVC: 1
13225E8794: RNCC: 5 | RNVC: 1

1 Jan 1962

5340-00-240-2579
Strap Hinge

002402579
ANSI/ BHMA A156.20: RNCC: 3 | RNVC: 1
ANSI/ BHMA A156.20- A81221: RNCC: 3 | RNVC: 2
FFH116: RNCC: 5 | RNVC: 9
SC922: RNCC: 5 | RNVC: 9
MS27972-26: RNCC: 5 | RNVC: 9
BHMA-A156.20: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-013-0991
Angle Bracket

010130991
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-040: RNCC: 3 | RNVC: 2
MS9593-040: RNCC: 5 | RNVC: 9

25 Nov 1975

5340-00-989-5729
Spring Tension Clip

009895729
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-209: RNCC: 3 | RNVC: 2
100-300-7-12: RNCC: 5 | RNVC: 2
NASM24066/2-209: RNCC: 5 | RNVC: 9
M24066/2-109: RNCC: 5 | RNVC: 9
M24066-2-209: RNCC: 5 | RNVC: 9
MIL-C-24066/2: RNCC: 5 | RNVC: 9
MS17160-109: RNCC: 5 | RNVC: 9
6002-102CC: RNCC: 5 | RNVC: 9
M24066-2-109: RNCC: C | RNVC: 1

8 Nov 1966

5340-01-610-2895
Loop Clamp

016102895
NASM21333-39: RNCC: 2 | RNVC: 2
NASM21333: RNCC: 5 | RNVC: 1

14 Aug 2012

5340-01-074-0626
Loop Clamp

010740626
JM44LC9D30T: RNCC: 3 | RNVC: 2
TA11C44D30T: RNCC: 3 | RNVC: 2
C2874D30: RNCC: 3 | RNVC: 2
S280D30: RNCC: 3 | RNVC: 2
477-30: RNCC: 3 | RNVC: 2
5340PL0847216: RNCC: 6 | RNVC: 9
5340PL1971999: RNCC: 6 | RNVC: 9
C2874D30: RNCC: 7 | RNVC: 2

24 Mar 1979

5340-01-070-9597
Access Cover

010709597
12268803: RNCC: 3 | RNVC: 2
5340010709597: RNCC: 5 | RNVC: 9

25 Jan 1979

5340-01-066-9671
Clamp Bolt Assembly

010669671
M85731/1-3: RNCC: 2 | RNVC: 2
MIL-DTL-85731/1: RNCC: 4 | RNVC: 1
MS14108-3: RNCC: 5 | RNVC: 1
21953-1: RNCC: 5 | RNVC: 1
MIL-F-85731/1-3: RNCC: 5 | RNVC: 9
2065036-0501: RNCC: 5 | RNVC: 9
MS14108-3: RNCC: 5 | RNVC: 9
5340PL0847212: RNCC: 6 | RNVC: 9
5340PL1867766: RNCC: 6 | RNVC: 9

21 Oct 1978

5340-01-032-0884
Butt Hinge

010320884
AA55594-12A: RNCC: 2 | RNVC: 2
A-A-55594: RNCC: 4 | RNVC: 1
MS35829-12A: RNCC: 5 | RNVC: 9
029667-1: RNCC: 5 | RNVC: 9
MS35829-12A: RNCC: 5 | RNVC: 9
MS35829-2A: RNCC: 5 | RNVC: 9
5340PL0846476: RNCC: 6 | RNVC: 9
5340PL1816665: RNCC: 6 | RNVC: 9

6 Dec 1976

5340-01-114-6836
Loop Clamp

011146836
MS21103-32: RNCC: 2 | RNVC: 2
MS21103: RNCC: 4 | RNVC: 1

20 Jun 1981

5340-01-114-0776
Loop Clamp

011140776
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D16-24N: RNCC: 3 | RNVC: 2

9 Jun 1981

5340-01-100-8661
Loop Clamp

011008661
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D5K: RNCC: 3 | RNVC: 2

14 Sep 1980

5340-01-087-5199
Loop Clamp

010875199
MS21122-25: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

19 Dec 1979

5340-01-086-9656
Loop Clamp

010869656
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D8KW: RNCC: 3 | RNVC: 2

7 Dec 1979

5340-01-083-8999
Loop Clamp

010838999
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D15KW: RNCC: 3 | RNVC: 2

3 Oct 1979

5340-01-079-7800
Dust And Moisture Seal Protective Cap-Plug

010797800
NAS834: RNCC: 3 | RNVC: 1
NAS834-96: RNCC: 3 | RNVC: 2
MIL-C-5501/7: RNCC: 5 | RNVC: 9
M5501/7-F22: RNCC: 5 | RNVC: 9
13: RNCC: C | RNVC: 1

12 Jul 1979

5340-01-099-7807
Snap Hook

010997807
NASM43770/5: RNCC: 3 | RNVC: 1
M43770/5-MIZE1: RNCC: 3 | RNVC: 2
M43770/5-MIZE1: RNCC: 5 | RNVC: 9
MIL-S-43770/5: RNCC: 5 | RNVC: 9
MS51828-6M1: RNCC: C | RNVC: 1

22 Aug 1980

5340-01-087-5198
Loop Clamp

010875198
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D27KWX: RNCC: 3 | RNVC: 2
MS21122-27: RNCC: 5 | RNVC: 9
NAS1715-3: RNCC: 5 | RNVC: 9
5340PL0847221: RNCC: 6 | RNVC: 9

19 Dec 1979

5340-01-081-5681
Expansion Shield

010815681
AA1923-412: RNCC: 2 | RNVC: 2
A-A-1923: RNCC: 4 | RNVC: 1
FF-S-325: RNCC: 5 | RNVC: 9
101448: RNCC: 5 | RNVC: 9

16 Aug 1979

5340-01-676-5559
Access Cover

016765559
CPT-3: RNCC: 3 | RNVC: 2
12600887: RNCC: 5 | RNVC: 2
4113106: RNCC: 5 | RNVC: 9
12600887: RNCC: 7 | RNVC: 2

1 Nov 2018

5340-01-054-4938
Butt Hinge

010544938
MS35822-13A: RNCC: 2 | RNVC: 2
MIL-H-9850: RNCC: 4 | RNVC: 1
MS35822-13A: RNCC: 5 | RNVC: 1

21 Jan 1978

5340-01-123-5712
Loop Clamp

011235712
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D12-8N: RNCC: 3 | RNVC: 2

15 Dec 1981

5340-01-463-3740
Padlock Set

014633740
F2827-B2: RNCC: 2 | RNVC: 2
FF-P-2827: RNCC: 4 | RNVC: 1
FF-P-2827-B2: RNCC: 5 | RNVC: 9
FF-P-2827-B: RNCC: 5 | RNVC: 9

18 Mar 1999

5340-01-578-0851
Extension Drawer Slide

015780851
8335389-1: RNCC: 3 | RNVC: 2
8335389-1: RNCC: 5 | RNVC: 2
8335389 / REV F: RNCC: D | RNVC: 9

27 Sep 2009

5340-01-702-0174
Dust And Moisture Seal Protective Cap

017020174
660-108ZRG101-2: RNCC: 3 | RNVC: 2

21 Jun 2022

Load More Results