What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Slide Keeper?

A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Stake Pocket?

A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

A Foot Bolt (BOLT,FOOT) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate. The bar is thrown by foot pressure and may be retracted by foot action or by spring action. Excludes BOLT, BARREL.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Mortise Bolt?

A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.

What is a Flush Bolt?

A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Chain Bolt?

A Chain Bolt (BOLT,CHAIN) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate and equipped with a spring to hold the bar in the closed position. The bolt is operated by means of a chain attached to one end of the bar, and is usually installed in a vertical position.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Door Ring?

A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Kick Door Plate?

A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.

A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

Hardware, Commercial - United States (US)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by United States (US) - NCB is 00 to 09

Page 8 of 1045

NSN Format for Hardware, Commercial
Codified by United States

53	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - United States (US)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 230 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 844 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 3054 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 202 Items
Holder,Loop 55 Items
Holder,Spring 1184 Items
What is a Compression Cup? 414 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 1759 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 55 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Slide Keeper? 57 Items: A Slide Keeper (KEEPER,SLIDE) is a device constructed of a rigid material designed for holding two chords in a desired position as though knotted, but capable of being slid to another position by applying pressure. See also KEEPER, BELT-STRAP.
What is a Rod End Clevis? 4719 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 1406 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 444 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 76 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 9570 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 53 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Stake Pocket? 10 Items: A Stake Pocket (POCKET,STAKE) is a receptacle built in or mounted on the edges or corners of platforms, coamings or similar objects. Designed to receive load retaining stakes or stanchions.
What is a Rigid Caster? 377 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 1452 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 128 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Foot Bolt? 15 Items: A Foot Bolt (BOLT,FOOT) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate. The bar is thrown by foot pressure and may be retracted by foot action or by spring action. Excludes BOLT, BARREL.
What is a Surface Bolt? 34 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 144 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 275 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Mortise Bolt? 13 Items: A Mortise Bolt (BOLT,MORTISE) is a bolt consisting of a sliding bar in a case which fits into a mortised opening in a door or the like. A handle piece projects from the surface of the door and engages with the sliding bar. It is usually installed in a horizontal position. Excludes BOLT, FLUSH.
What is a Flush Bolt? 21 Items: A Flush Bolt (BOLT,FLUSH) is a bolt whose sliding bar is mortised into a door or the like and whose case plate is mounted flat against the surface of the door over the mortised opening. It is operated with a lever or handle which may or may not extend beyond the case plate. Excludes BOLT, MORTISE.
What is a Door Hook And Eye? 61 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 191 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Push Door Plate? 28 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Chain Bolt? 12 Items: A Chain Bolt (BOLT,CHAIN) is a bolt with a sliding bar guided in a case which may or may not be mounted on a single plate and equipped with a spring to hold the bar in the closed position. The bolt is operated by means of a chain attached to one end of the bar, and is usually installed in a vertical position.
What is a Mortise Latch Set? 224 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Thumb Latch? 250 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 611 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Sliding Door Hanger? 39 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 45 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 238 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Casement Fastener? 77 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Door Ring? 24 Items: A Flush Door Ring (RING,DOOR,FLUSH) is a metal device, consisting of a ring fastened in a cuplike plate so that the ring and plate are flush; to be fastened to and used in opening doors.
What is a T Plate? 70 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 175 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 204 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 217 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 284 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Kick Door Plate? 56 Items: A Kick Door Plate (PLATE,DOOR,KICK) is a rectangular item for fastening to the base of a door to prevent marring or damage.
What is a Doorstop? 153 Items: A Doorstop is a device generally made of wood or metal consisting of a base and a tip; may or may not have a shank. The tip has a rubber buffer imbedded in it to prevent the door from striking or damaging the wall or baseboard.
What is a Sliding Door Track Bracket? 89 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Doorknob? 38 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Mortise Lock Set? 251 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 274 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Tee Hinge? 144 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 28 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is an Exit Bolt? 39 Items: An Exit Bolt (BOLT,EXIT) is a bolt with a vertical two-piece rod, which is joined together in the active case, extending in opposite directions from the case. The rod slides in guides and is thrown by means of a horizontal cross bar on the inside of the door and may be thrown by a handle, knob, lever, bar or key on the outside of the door. It may be equipped with a lock or latch; the two-piece rod may be locked in a retracted position to permit the door to be operated from inside or outside.
What is a Rope Cleat? 29 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 2846 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 279 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Latch Set? 272 Items: A Rim Latch Set (LATCH SET,RIM) is a latch set in which the latch is designed to be mounted on the surface of a door, drawer, and the like.
What is a Rim Lock Set? 121 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 48 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 600 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1299 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Dirt And Liquid Deflector? 390 Items: A Dirt And Liquid Deflector (DEFLECTOR,DIRT AND LIQUID) is an item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.
What is a Fusible Plug? 150 Items: A Fusible Plug (PLUG,FUSIBLE) is an externally threaded cylindrical item, usually containing a fusible core, or a tapered smooth finished press-in insert made entirely of metallic eutectic substance. If without core, the item may be machined internally or have provisions to accomodate same. It is a safety device for aircraft wheels (prevents heat induced tire explosion), boilers, compressors, and similar equipment.
What is a Bridge Clamp? 431 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 999 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Glide? 200 Items: A Furniture Glide (GLIDE,FURNITURE) is an item of various shapes, with or without a cushion or pad, which has a smooth hard surface. It is designed to be attached to, or inserted in the base of furniture legs, or it may be used for leveling an object and/or for protecting the object from damage by reducing the impact of another object making contact with it.
What is a Furniture Leg Tip? 19 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Drift Bolt? 21 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Screw Hook? 98 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 261 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 1411 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 7198 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 3508 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 1582 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Belt-Strap Keeper? 55 Items: A Belt-Strap Keeper (KEEPER,BELT-STRAP) is a rectangular strip fastened or fabricated into loop form used to retain the loose end(s) of a belt or strap. See also KEEPER, SLIDE.
What is a Handle Grip? 780 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Shaft Collar? 92 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Suction Cup? 93 Items: A Suction Cup (CUP,SUCTION) is an item of rubber with a concave face which, when pressed upon a smooth surface, attaches itself by means of a created vacuum. It is usually designed for attaching to a shaft, handle, or the like.
What is a Bolt And Spacer Kit? 133 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
Loop Clamp Kit 19 Items
What is a Blank Panel? 1088 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 354 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 112 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 377 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 1634 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Recording Paper Roll Hub? 14 Items: A Recording Paper Roll Hub (HUB,ROLL,RECORDING PAPER) is a hub used as a short axis on the end of a roll of recording paper.
What is a Plain Solid Disk? 1257 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is a Hasp Staple? 33 Items: A Hasp Staple (STAPLE,HASP) is an eye or U-shaped piece of material affixed to a plate used as a fastener, usually in conjunction with a hasp and pin or hasp and padlock.
What is a Padlock Eye? 21 Items: A Padlock Eye (EYE,PADLOCK) is a flat metal plate having an eye, usually used in pairs, designed to provide means for locking doors, drawers, and the like by means of a padlock.
What is a Sash Pulley? 26 Items: A Sash Pulley (PULLEY,SASH) is an encased wheel with a grooved face, designed to provide freedom of movement to a rope or chain used in the hanging of window sash.
What is an Angle Bracket? 21199 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Case Corner? 34 Items: A Case Corner (CORNER,CASE) is a three sided object of thin material, shaped to fit over and protect the corner of a box or case. See also BRACE, CORNER.
What is an Eye Hook? 81 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 580 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 119 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 471 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 22120 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 601 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 797 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Window Regulator Handle? 21 Items: A Window Regulator Handle (HANDLE,WINDOW REGULATOR) is a crank or T-shaped item designed to be mounted on the shaft of a window operating mechanism. Excludes CRANK, HAND.
What is a Friction Catch Stud Receptacle? 105 Items: A Friction Catch Stud Receptacle (RECEPTACLE,FRICTION CATCH STUD) is an item of resilient metallic material, or an item of resilient nonmetallic material which may be rigidly encased, having provisions for mounting to a door, panel, or the like. It is designed to receive and retain, by compression of the resilient material, a STUD, FRICTION CATCH, yet permit easy withdrawal of the stud under normal pull. For items of rigid material which mate with the plunger, bolt, ball, or the like, of a CATCH, FRICTION, see STRIKE, CATCH.
What is a Friction Catch Stud? 114 Items: A Friction Catch Stud (STUD,FRICTION CATCH) is a rigid metallic item with facilities for mounting to a door, sill, panel, or the like. It is the male component of a CATCH, FRICTION, designed to be inserted and retained by a RECEPTACLE, FRICTION CATCH STUD. For items having a spring actuated plunger, ball, bolt, latch, or the like, see CATCH, FRICTION.
Hanger And Track Set,Horizontal Sliding Door 14 Items
What is a Dust And Moisture Seal Boot? 2235 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 476 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Pipe Covering Protection Saddle? 12 Items: A Pipe Covering Protection Saddle (SADDLE,PIPE COVERING PROTECTION) is a metal item designed to bear pipe on roller type hanger(s) or support(s) to prevent insulation from being damaged or deformed.
What is a Ball Socket Seat? 200 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 40 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
What is a Split Tubular Clip? 44 Items: A Split Tubular Clip (CLIP,SPLIT TUBULAR) is a tubular item of resilient metallic material, split along its entire length and having a flange at one end, usually with projecting arms or prongs extending from the body. It is designed to be inserted into a hole in a panel and held in place by spring tension. It is used to retain unthreaded items such as a pin or a rivet.
What is a Quick Release Plunger? 753 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Spring Loaded Cylinder Fastener? 93 Items: A Spring Loaded Cylinder Fastener (FASTENER,CYLINDER,SPRING LOADED) is a positive locking device consisting of a spring loaded cylinder and plunger. One end has a handle with an eye, hook, bar, or the like, for fastening to the item to be retained. The opposite end usually has a plate, bracket, stud, hook, or the like, for fastening to a structure. It may be furnished with a catch.
What is a Catch Strike? 1705 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 349 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flare Lock Fastener? 60 Items: A Flare Lock Fastener (FASTENER,FLARE LOCK) is a shouldered hollow screw and threaded sleeve assembly, designed to be fastened in place by turning the screw, causing one end of the sleeve to flare over the shoulder and against the material through which it has been inserted. Also, a countersunk head hollow screw and flared sleeve-nut assembly, designed to mate with a dimpled hole in the material to which it is fastened. The hollow screws may also have internal threads for attaching screws. See also SHIELD, EXPANSION.
What is an Escutcheon Plate? 185 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 963 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 390 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Grooved Clamp Coupling Ferrule? 200 Items: A Grooved Clamp Coupling Ferrule (FERRULE,GROOVED CLAMP COUPLING) is a flanged, flared or beaded hollow cylindrical metallic item designed to be affixed to the end of a tube, pipe duct or the like. It is used to mate with the groove of a COUPLING, CLAMP, GROOVED to create a fluid tight joint and/or connection. See also FERRULE, BRAZING, TUBE FITTING.
What is a Retaining Band? 776 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Grooved Clamp Coupling? 118 Items: A Grooved Clamp Coupling (COUPLING,CLAMP,GROOVED) is a metal loop having either a V or U cross section or channelled segment(s). It may be attached to a flat band. It is designed to create a fluid tight joint and/or connect pipe, tubing, tank cover(s), duct(s) and the like, by mating with flanged or beaded ferrule(s), flared, or beaded ends. It may or may not have a sealing inner liner. A latch or latches of the quick coupling type, nut or bolt type, or threaded trunnion type is (are) used to lock and adjust the band. Excludes COUPLING, CLAMP, PIPE and RING, LOCKING, METAL DRUM COVER.
What is a Bow Handle? 3131 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 57 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 122 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 793 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 5156 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 298 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 52 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 4252 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 5873 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 185 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Shop Set Installation Hardware Kit? 47 Items: A Shop Set Installation Hardware Kit (HARDWARE KIT,SHOP SET INSTALLATION) is a collection of common hardware items, such as nuts, bolts, and washers, designed to fasten or attach shop set equipment when installing it in a shop truck as part of the basic load.
What is a Headless Straight Rod? 1266 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Hinge Torsion Bar? 81 Items: A Hinge Torsion Bar (TORSION BAR,HINGE) is a straight metal item of various cross-sectional shapes, with serrations, flats, or the like, on each end. It is designed to withstand a severe twisting action along its longitudinal axis while held fast at both ends. It is used in lieu of a hinge pin and creates tension on a hatch(es), door(s), gate(s), or the like, when in a closed or open position. Excludes TORSION BAR, SUSPENSION.
What is a Rigid Connecting Link? 119 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Cushioning Pad? 2414 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 200 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 895 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 198 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is an Air Inlet-Outlet Frame? 125 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 112 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 95 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 3474 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 1152 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 1047 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 2030 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 3336 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 58 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 162 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Strapping Seal? 75 Items: A Strapping Seal (SEAL,STRAPPING) is a metallic device designed to securely join the ends of strapping (metallic or nonmetallic) when being used to secure boxes, bales, or packages for shipment. Also includes seal with clamping ears which is used primarily for banding rectangular, square, and round articles, such as hose, tanks, and the like.
What is a Strapping? 88 Items: A Strapping is a flat strip of steel, coated corded cloth, or other material fabricated to a specified breaking strength. It is supplied in coils and primarily used for securing boxes, parts, or packages for shipment. Excludes TAPE (as modified); TWINE (as modified); WEBBING, TEXTILE; PLASTIC STRIP; STRAP, PIPE; WIRE, STEEL (as modified); and WIRE, TIE.
What is a Clamping Catch? 1226 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is a Cable Retractor? 147 Items: A Cable Retractor (RETRACTOR,CABLE) is a device consisting of a spring powered cable retriever, a base or mounting facility, designed to retrieve a length of extended cable. It may have constant force return capabilities. For construction equipment see REEL, CABLE; REELING MACHINE (as modified) or WINCH (as modified).
What is a Body Hub? 38 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Screw Thread Insert And Tool Assortment? 63 Items: A Screw Thread Insert And Tool Assortment (INSERT AND TOOL ASSORTMENT,SCREW THREAD) is two or more different sizes and/or types of INSERT, SCREW THREAD furnished with corresponding tap(s) and tool(s) for installation.
What is an Extension Drawer Slide? 3147 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 1024 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 415 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 886 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 28210 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 502 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 871 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Self-Locking Insert? 382 Items: A Self-Locking Insert (INSERT,SELF-LOCKING) is a nonmetallic unthreaded item generally round in cross-sectional shape which, when placed on/in a machined-out portion of the threads of a screw or bolt, or inserted into the machined-out portion of the threads of a nut, locks the item, to which it is fixed, to the attached mating member and prevents loosening during excessive vibration. Excludes BOLT, SELF-LOCKING; NUT, SELF-LOCKING (as modified); SCREW, SELF-LOCKING; and INSERT, SCREW THREAD.
Handle,Extension 163 Items
What is an Antipilferage Seal? 241 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 2909 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Magnetic Catch? 51 Items: A Magnetic Catch (CATCH,MAGNETIC) is a permanently magnetized hardware device designed to temporarily hold immovable, a swinging cabinet door or similar mechanism. Excludes CATCH, FRICTION; HOLDER, DOOR; and LATCH (as modified).
What is a Picture Hanger? 14 Items: A Picture Hanger (HANGER,PICTURE) is a hook like device that is secured to walls, bulkheads, columns and the like, by means of a nail, screw, magnet or adhesive backed cloth, that is included with and/or attached to the hook. It is designed to hold and suspend variuos items such as photographs, paintings, maps, documents, etc.
What is a Protection Bellows? 150 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Vehicle Cargo Tie Down? 13 Items: A Vehicle Cargo Tie Down (TIE DOWN,CARGO,VEHICLE) is an item consisting of rope(s), cable(s), chain(s) or strap(s) terminated on one or more end(s) with hook(s), ring(s), clamp(s) and the like, designed to secure or restrain movement of cargo carried on a vehicle. May include spring(s), turnbuckle(s) or other tensioning devices.
What is an Office Machine Lock? 51 Items: An Office Machine Lock (LOCK,OFFICE MACHINE) is a lock designed to secure portable office equipment to desks, tables, or counters to prevent pilferage or unauthorized removal. This item is key operated and may be furnished with an adjustable locking bar or cable.
What is a Lever Bracket? 270 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 973 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Dust And Moisture Seal Protective Cap Set? 116 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug Set? 43 Items: A Dust And Moisture Seal Protective Cap-Plug Set (CAP-PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug Set? 71 Items: A Dust And Moisture Seal Protective Plug Set (PLUG SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Fairlead? 28 Items: A Block Fairlead (FAIRLEAD,BLOCK) is a multipiece item of various shapes that must have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to cable, tubes and the like passing through it. It is not designed to grip an item. It may be attached to another object or structure. Excludes CLAMP, BLOCK and BRACKET, PIPE.
What is a Block Clamp? 2133 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 96 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 41628 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 113 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 102 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Section Block Clamp? 693 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
Plate,Leveling 20 Items
Plate,Engine 84 Items
What is a Retaining Bail? 62 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
Plate,Actuator,Mounting 49 Items
What is a Beam Gripping Clamp? 101 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 15164 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 316 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 2707 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 1587 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Hinged Standoff? 46 Items: A Snap-In Hinged Standoff (STANDOFF,HINGED,SNAP-IN) is an unthreaded standoff with a projection on both ends which can be snapped, press fitted or locked into position. It must have a hinge or flexible piece of material to allow independent movement of the ends.
What is a Threaded Hinged Standoff? 122 Items: A Threaded Hinged Standoff (STANDOFF,HINGED,THREADED) is a standoff, internally and/or externally, threaded on both ends with a hinge or pivot point to allow for independent movement of the ends.
What is a Snap-In Plain Standoff? 346 Items: A Snap-In Plain Standoff (STANDOFF,PLAIN,SNAP-IN) is an unthreaded standoff with one or more projections that can be snapped, press fitted or locked into position.
What is a Snap-In Threaded Standoff? 245 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 11654 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 1549 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 288 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Shipping Container Bracket? 24 Items: A Shipping Container Bracket (BRACKET,SHIPPING CONTAINER) is a rigid metallic/nonmetallic item of various shapes, designed to be used as a part of the container for the purpose of assembly or retention of item(s) to be contained within.
What is an Antipilferage Seal Locking Wire? 23 Items: An Antipilferage Seal Locking Wire (WIRE,LOCKING,ANTIPILFERAGE SEAL) is a wire consisting of two wire strands designed to prevent unauthorized access or unintentional opening and used in connection with a SEAL, ANTIPILFERAGE.
What is a Crank Handle? 280 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 202 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is a Fire Extinguisher Safety Plug? 10 Items: A Fire Extinguisher Safety Plug (PLUG,SAFETY,FIRE EXTINGUISHER) is an item of various materials that is threaded, and is to be inserted into part of valve body, for safety, to prevent item from becoming a missile/projectile if ruptured
What is an Arched Cushion? 95 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 144 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 245 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Caster Frame? 63 Items: A Caster Frame (FRAME,CASTER) is a metallic or nonmetallic item of various shapes designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL.
What is a Half Grooved Segment? 10 Items: A Half Grooved Segment (SEGMENT,GROOVED,HALF) is an item with a facility on top for holding a clamping device in place that is used to exert pressure. Can have a V or U cross section. Excludes COUPLING HALF, CLAMP GROOVED.
What is a Pipe Hanger? 1063 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 232 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 244 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Magnetic Base? 32 Items: A Magnetic Base (BASE,MAGNETIC) is a device for holding/supporting various items including lights, measuring tools, instruments and the like. It is affixed to the surface to which it is mounted by magnetic force. For holding items on a machine tool see CHUCK, MAGNETIC.
What is a Leakproof Seal Plug? 298 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is a Door Stop Arm? 16 Items: A Door Stop Arm (ARM,DOOR STOP) is a device made of metal designed to be attached to a door at one end and a door post on the other end. When the arm is extended it holds the door open.
What is a Mechanic Equipment Hardware Kit? 853 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Track Stop? 107 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 119 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Valve Actuator Guard? 49 Items: A Valve Actuator Guard (GUARD,VALVE ACTUATOR) is a rigid item which partially surrounds a handwheel, knob, lever, handle, or the like to protect and to prevent accidental operation of a VALVE (as modified). It also protects personnel from injury due to contact with a protruding actuator(s). Excludes GUARD, MECHANICAL DRIVE; GUARD, SWITCH; and GUARD, VALVE STRIP.
What is a Lock Key? 120 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 49 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Lock Spindle? 40 Items: A Lock Spindle (SPINDLE,LOCK) is an item which is a part of a Lock (as modified), used to transmit rotary motion from the handle or knob to actuate the bolt.
What is a Door Stop Chain? 16 Items: A Door Stop Chain (CHAIN,DOOR STOP) is an item specifically designed to protect a door from damage by limiting the full opening travel. When installed one end is attached to the door and the other end to the door frame. It has a mounting bracket at each end and at least one compression spring between the chain and bracket to absorb shock. The chain is easily detached from one bracket to allow for opening adjustments, full opening or removal of the door.
What is a Dust And Moisture Seal Protective Cover? 1914 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 197 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is an Electromagnetic Lock? 46 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 112 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Liquid Holding Unit Filler Neck? 44 Items: A Liquid Holding Unit Filler Neck (FILLER NECK,LIQUID HOLDING UNIT) is a tubular item specifically designed for directing the flow of a fluid, and must accommodate a CAP (as modified) or BREATHER on one end. The opposite end has provisions for mounting directly on, or indirectly through a pipe, tube, or hose to a stationary or portable TANK or RESERVOIR (as modified); an engine crankcase; radiator; transmission housing; and the like. It may have means for overflow. For items which do not accommodate a CAP (as modified) or BREATHER see TUBE; PIPE; or HOSE (as modified). See also FILLER NECK, AIRCRAFT COMPONENTS and FILLER NECK, VEHICULAR COMPONENTS.
What is a Grooved Clamp Coupling Sleeve? 77 Items: A Grooved Clamp Coupling Sleeve (SLEEVE,COUPLING,CLAMP,GROOVED) is a cylindrical item usually metallic which is mounted within a COUPLING, CLAMP, GROOVED. It is designed to position the seals and create a tight connection between two FERRULE, GROOVED CLAMP COUPLING.
What is a Sliding Block? 67 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Safety Cable Kit? 60 Items: A Safety Cable Kit is a pre-assembled wire cable having a formed end cap attached to one end. The opposite end is fused to prevent splaying and is fitted with a crimpled ferrule to restrict movement. The intended usage is for securing fasteners, hardware and the like.
What is a Nut And Bolt Head Protective Cap? 126 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is a Positioning Thrust Stop? 22 Items: A Positioning Thrust Stop (STOP,THRUST,POSITIONING) is a two-piece metallic item designed to stop and maintain in alignment a mechanical element from another mechanical element on which they are fixed by means of a clamping device.
What is a Cover Strip? 295 Items: A Cover Strip is a thin narrow strip of metal or other material used to reinforce a joint between two elements.
What is a Slotted Nut Locking Device? 11 Items: A Slotted Nut Locking Device (LOCKING DEVICE,SLOTTED NUT) is a U shape metallic item designed to lock a slotted nut on a locking sleeve generally used for bearing(s) mounting. The item is inserted in one slot of the nut and in the sleeve slot and fixed by means of a screw. When locked in position it secures the nut from turning and the mounting bearing from loosening.
What is an Utility Access Door? 1713 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is a Plastic Filler Block? 30 Items: A Plastic Filler Block (BLOCK,FILLER,PLASTIC) is a filler block installed in a door panel to support the weight of rolled panels.
What is an Utility Resilient Mount? 3320 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Hydraulic Ram Support? 19 Items: A Hydraulic Ram Support (SUPPORT,HYDRAULIC RAM) is an item, usually metallic, of various shapes and sizes, specifically designed to provide support for a RAM, HYDRAULIC.
What is a Door Handle Unit? 29 Items: A Door Handle Unit (HANDLE UNIT,DOOR) is a combination of two HANDLE DOOR or one HANDLE, DOOR and a DOORKNOB. A square pin, a locking cylinder, bushings, rosettes and mounting hardward may be included.
What is a Flush Catch Claw? 32 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is a Clevis And U-Bolt? 87 Items: A Clevis And U-Bolt is an item consisting of a U-bolt and clevis joined on opposite sides of a common mounting.
What is a Shimmy Damper? 215 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 2010 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 156 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Key Holder? 86 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 125 Items
What is a Key Blank? 524 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 61 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 216 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 1267 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 54 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 72 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 2343 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 53 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Ladder Safety Shoe? 22 Items: A Ladder Safety Shoe (SHOE,SAFETY,LADDER) is an item designed for attachment to the bottom of ladder side rails to prevent the ladder from sliding or skidding when in operative position. It is usually a hinged assembly consisting of a metal plate with nonskid pad or coating and ladder attaching brackets and may include ice gripping features.
What is an Assembled Nut Retainer? 354 Items: An Assembled Nut Retainer (RETAINER,ASSEMBLED NUT) is an item consisting of a retainer and nut designed to be mounted to accommodate an externally threaded device, such as a bolt or a screw. For similar items without a nut, see RETAINER, NUT AND BOLT. Excludes NUT, PLAIN, CLINCH.
What is a Sealing Plug Assembly? 574 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is an Installations Guard? 10 Items: An Installations Guard (GUARD,INSTALLATIONS) is an item designed to be used with sharp edged built in parts in cabins and the like to protect against injuries. It may be covered with cushioning material.
What is a Lifting Sling Sleeve? 28 Items: A Lifting Sling Sleeve (SLEEVE,LIFTING SLING) is a flexible nonmetallic item specifically designed to fit over or enclose a strap, chain, rope, webbing, or the like to ensure protection to the cargo and lifting gear. It may be molded in a circular or tubular shape, open at both ends, or fabricted into a wrap around clip-on type. The item adheres to smooth surfaces, forms to the shape of the cargo and is resistant to abrasions and cuts.
What is a Gearbox Link Assembly? 17 Items: A Gearbox Link Assembly (LINK ASSEMBLY,GEARBOX) is an item consisting of a bolt, washer(s) and a barrel nut. It is specifically meant to mount a gearbox of a rotary aircraft.
What is a Tie Down Adapter? 134 Items: A Tie Down Adapter (ADAPTER,TIE DOWN) is a plate type adapter designed to be attached to a structural component to provide the necessary accommodations to secure cargo. It may contain a ring or other attachment fitting. (Excludes ADAPTER, TIE DOWN, AIRCRAFT FLOOR and ADAPTER, TIE DOWN, AIRCRAFT)
What is a Fastener Pawl? 38 Items: A Fastener Pawl (PAWL,FASTENER) is a component of a FASTENER, PAWL which allows locking of panels, doors and the like on their frames or adjoining surfaces when fastener key or knob is actuated. It may be adjustable.
What is a Locking Stay? 346 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Stand And Roller Pipe Support Extension Tube? 25 Items: A Stand And Roller Pipe Support Extension Tube (TUBE,EXTENSION,STAND AND ROLLER PIPE SUPPORT) is a tubular item used to extend the length of a SUPPORT, PIPE, and ROLLER.
What is a Lock Bar? 155 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Utility Guard Rail Section? 123 Items: An Utility Guard Rail Section (GUARD RAIL SECTION,UTILITY) is a metallic tubular structure mounted on platforms,roofs and the like to prevent personnel and/or equipment from falling overboard. It is designed and fitted for a quick connecting-disconnecting. It may include fastening hardware.
What is a Caster Set? 21 Items: A Caster Set is a group of one or more CASTER, RIGID and one or more CASTER, SWIVEL.
What is an Aircraft Latch Hook? 59 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is an Universal Adjustable Chock? 11 Items: An Universal Adjustable Chock (CHOCK,ADJUSTABLE,UNIVERSAL) is a self leveling, height adjustable and re-usable chock, designed to be mounted to all types of rotating equipment to base frames, steel foundations and the like, for the alignment of machinery.
What is a Bumper? 5182 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Top Handler Twist Lock Hardware Kit? 12 Items: A Top Handler Twist Lock Hardware Kit (HARDWARE KIT,TWIST LOCK,TOP HANDLER) is a kit consisting of items such as a pin, bearing, key, washer, nut, and stop screw. It is used on the top handler, twist lock that picks up the shipping containers.
What is an Assembled Nut Retainer Ring? 37 Items: An Assembled Nut Retainer Ring (RETAINER RING,ASSEMBLED NUT) is a flat metal ring with provisions for attaching nuts in predetermined spacing. For ring with nuts assembled see NUT ASSEMBLY,RETAINER RING.
What is a Wire Rope Terminal Retainer? 14 Items: A Wire Rope Terminal Retainer (RETAINER,WIRE ROPE TERMINAL) is an item used to retain a swagged wire rope terminal of a CONTROL ASSEMBLY, PUSH-PULL. It generally has a slot to engage the rope and an adapted hole to fit the rope terminal. It may have mounting means for attachment to, or may be retained in, a clevis.
What is a Cover Retainer? 122 Items: A Cover Retainer (RETAINER,COVER) is an item of various shapes and sizes designed to be attached to a vehicle or a structure as to hold a COVER (as modified). It may include mounting hardware.
What is a Retaining Harness? 72 Items: A Retaining Harness (HARNESS,RETAINING) is an arrangement of adjustable and/or non-adjustable (elastic) straps and hardware designed to affix an item to a structure, a container, and the like. The straps may be mounted on a plate, sewed together, and the like.
What is a Detachable Link? 27 Items: A Detachable Link (LINK,DETACHABLE) is a metal link made in two or more pieces, held securely together by means of a locking pin or other device but may taken apart for reuse. It is used to connect a chain and/or a cable and/or a rope and/or a strap, and the like. Excludes transmission chain links.
What is a Grommet Assembly? 49 Items: A Grommet Assembly is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. May include such items as washers, screws, and bolts.
What is a Door Frame? 19 Items: A Door Frame (FRAME,DOOR) is a casing or enclosing framework, in which a DOOR (as modified) may be set or hung.
What is a Prop Rod? 13 Items: A Prop Rod (ROD,PROP) is a fabricated item of any shape and material used to prop open a toolbox or storage box or other like items. Excludes ROD,HOOD,VEHICULAR.
What is a Threaded Standoff Assembly? 21 Items: A Threaded Standoff Assembly is an item consisting of a STANDOFF,THREADED,SPACING (40280) and one or more NUT (as modified), WASHER (as modified), and the like.
What is a Section Housing Panel? 45 Items: A Section Housing Panel (PANEL,HOUSING,SECTION) is an item of any shape and material designed to mate with other sections to form a complete housing unit. May have louvers or vents to allow passage of airflow.

Stock Items From Supply Class 5340 Page 8 of 1045

5340-01-707-2888
Mounting Bracket

017072888
842-349625-2: RNCC: 3 | RNVC: 2

26 Jan 2023

5340-01-708-8032
Double Angle Bracket

017088032
AB513Q: RNCC: 3 | RNVC: 2

24 Apr 2023

5340-01-706-4124
Electronic Equipment Hardware Kit

017064124
069988-0000: RNCC: 3 | RNVC: 2

22 Nov 2022

5340-01-707-2583
Electronic Equipment Hardware Kit

017072583
OFB-2071-A1: RNCC: 3 | RNVC: 2

25 Jan 2023

5340-01-707-1866
Angle Bracket

017071866
326P1S0835-103: RNCC: 3 | RNVC: 2

20 Jan 2023

5340-01-708-7594
Retaining Strap

017087594
99561: RNCC: 3 | RNVC: 2

21 Apr 2023

5340-01-457-7927
Bow Handle

014577927
NASM39087: RNCC: 3 | RNVC: 1
MS39087-312AN: RNCC: 3 | RNVC: 2
MS39087-312AN: RNCC: 5 | RNVC: 9

4 Aug 1998

5340-01-707-6921
Dust And Moisture Seal Protective Plug

017076921
014394: RNCC: 3 | RNVC: 2

16 Feb 2023

5340-01-707-6510
Cushioning Pad

017076510
12582101-103: RNCC: 3 | RNVC: 2
12582101: RNCC: D | RNVC: 9
12582100: RNCC: D | RNVC: 9

14 Feb 2023

5340-01-709-0752
Mounting Bracket

017090752
12638676-T: RNCC: 3 | RNVC: 2

10 May 2023

5340-01-706-6363
Mounting Bracket

017066363
223-8216645-85: RNCC: 3 | RNVC: 2
H751-0112-PN-85: RNCC: 5 | RNVC: 2

9 Dec 2022

5340-01-706-6335
Rigid Connecting Link

017066335
983-9041-951: RNCC: 3 | RNVC: 2

9 Dec 2022

5340-01-706-6305
Utility Resilient Mount

017066305
81163/1050.00: RNCC: 3 | RNVC: 2

9 Dec 2022

5340-01-707-5360
Sealing Plug Assembly

017075360
NAV94108: RNCC: 3 | RNVC: 2
NAV94108: RNCC: 3 | RNVC: 9
NAV94108: RNCC: 5 | RNVC: 2

8 Feb 2023

5340-01-707-4719
Mounting Plate

017074719
114-1389-1: RNCC: 3 | RNVC: 2

3 Feb 2023

5340-01-706-7764
Mounting Bracket

017067764
60438-3: RNCC: 3 | RNVC: 2
60438: RNCC: D | RNVC: 9

17 Dec 2022

5340-01-706-7667
Mounting Plate

017067667
03002B7819-1: RNCC: 3 | RNVC: 2
03002B7819: RNCC: D | RNVC: 9

16 Dec 2022

5340-01-707-6525
Double Angle Bracket

017076525
N9839: RNCC: 3 | RNVC: 2

14 Feb 2023

5340-01-706-5250
Mounting Bracket

017065250
5639358: RNCC: 3 | RNVC: 2

2 Dec 2022

5340-01-707-7281
Access Cover

017077281
2943201-103: RNCC: 3 | RNVC: 2

18 Feb 2023

5340-01-707-7180
Dust And Moisture Seal Protective Cap

017077180
799360: RNCC: 3 | RNVC: 2

17 Feb 2023

5340-01-705-7622
Angle Bracket

017057622
201757558-03: RNCC: 3 | RNVC: 2

11 Oct 2022

5340-01-708-8455
Mounting Bracket

017088455
NWA0059: RNCC: 3 | RNVC: 2

26 Apr 2023

5340-01-707-6903
Rod End Connector

017076903
B001200F01003-9: RNCC: 3 | RNVC: 2
B001200F01003: RNCC: D | RNVC: 9

16 Feb 2023

5340-01-705-8851
Angle Bracket

017058851
12476961-2: RNCC: 3 | RNVC: 2

19 Oct 2022

5340-01-705-6991
Access Cover

017056991
5-13-10848-2: RNCC: 3 | RNVC: 2
5-13-10848: RNCC: D | RNVC: 9

5 Oct 2022

5340-01-706-7184
Mounting Bracket

017067184
37163-2: RNCC: 3 | RNVC: 2
37163: RNCC: D | RNVC: 9

14 Dec 2022

5340-01-707-6836
Mounting Plate

017076836
988-0662-001: RNCC: 3 | RNVC: 2

15 Feb 2023

5340-01-705-8969
Mounting Bracket

017058969
12616293-1: RNCC: 3 | RNVC: 2
12616293: RNCC: D | RNVC: 9

20 Oct 2022

5340-01-707-6949
Rod End Connector

017076949
B001200F01003-7: RNCC: 3 | RNVC: 2
B001200F01003: RNCC: D | RNVC: 9

16 Feb 2023

5340-01-705-7924
Butt Hinge

017057924
3039-002032: RNCC: 3 | RNVC: 2

13 Oct 2022

5340-01-705-9212
Mounting Plate

017059212
12609638: RNCC: 3 | RNVC: 2
12609638: RNCC: 5 | RNVC: 2

21 Oct 2022

5340-01-707-3746
Access Cover

017073746
1162533: RNCC: 3 | RNVC: 2

30 Jan 2023

5340-01-706-4723
Spacing Threaded Standoff

017064723
NAS1829A4F08: RNCC: 3 | RNVC: 2

29 Nov 2022

5340-01-706-4724
Retaining Strap

017064724
2637478: RNCC: 3 | RNVC: 2

29 Nov 2022

5340-01-708-8802
Loop Clamp

017088802
4213AS0104-1: RNCC: 3 | RNVC: 2
4213AS0104: RNCC: D | RNVC: 9

28 Apr 2023

5340-01-709-1230
Rod End Locking Retainer

017091230
18-0034-1: RNCC: 3 | RNVC: 2
7-4860-1: RNCC: 5 | RNVC: 1

12 May 2023

5340-01-705-9243
Utility Access Door

017059243
3072: RNCC: 3 | RNVC: 2
5613-638-001 REVI SH9 ITEM # 8A: RNCC: 5 | RNVC: 9
5613-638-001: RNCC: D | RNVC: 9

21 Oct 2022

5340-01-705-7754
Tie Down Ring

017057754
1206905: RNCC: 3 | RNVC: 2

12 Oct 2022

5340-01-706-6227
Angle Bracket

017066227
78201-02512-102: RNCC: 3 | RNVC: 2

8 Dec 2022

5340-01-707-5446
Mounting Plate

017075446
38-18652: RNCC: 3 | RNVC: 2
20526: RNCC: D | RNVC: 9

8 Feb 2023

5340-01-707-3836
Mounting Bracket

017073836
92018-15: RNCC: 3 | RNVC: 2

31 Jan 2023

5340-01-706-4925
Mounting Plate

017064925
PAAI013540: RNCC: 3 | RNVC: 2
DAAK018463 REV - SEQ 061: RNCC: 5 | RNVC: 9
DAAK018463 PL: RNCC: D | RNVC: 9
DAAK018463: RNCC: D | RNVC: 9

30 Nov 2022

5340-01-706-0482
Mounting Bracket

017060482
12638685: RNCC: 3 | RNVC: 2

27 Oct 2022

5340-01-706-8452
Grooved Clamp Coupling

017068452
9431A-490-A: RNCC: 3 | RNVC: 2
8592348 FIND NO 27: RNCC: 5 | RNVC: 2

22 Dec 2022

5340-01-707-7842
Mounting Bracket

017077842
566-6985428-17: RNCC: 3 | RNVC: 2
H621-0104-17: RNCC: 5 | RNVC: 9
6985428: RNCC: D | RNVC: 9

22 Feb 2023

5340-01-707-8624
Access Cover

017078624
USC-SLBC-2: RNCC: 3 | RNVC: 2
PARTS LIST: RNCC: D | RNVC: 9

27 Feb 2023

5340-01-706-0502
Mounting Plate

017060502
12611231: RNCC: 3 | RNVC: 2
12611231: RNCC: 5 | RNVC: 2

27 Oct 2022

5340-01-707-8342
Mounting Plate

017078342
8028-080-2550: RNCC: 3 | RNVC: 2
8028-080-2550: RNCC: 3 | RNVC: 2

24 Feb 2023

5340-01-706-0145
Loop Clamp

017060145
CDV-1113: RNCC: 3 | RNVC: 2
3861492: RNCC: 5 | RNVC: 9
12600937-004: RNCC: 5 | RNVC: 9
12600937: RNCC: 7 | RNVC: 2

25 Oct 2022

5340-01-707-8600
Blank Panel

017078600
4106AS0110-4: RNCC: 3 | RNVC: 2
4106AS0110-4: RNCC: 5 | RNVC: 2
4106AS0110: RNCC: D | RNVC: 9

27 Feb 2023

5340-01-706-7887
Mechanic Equipment Hardware Kit

017067887
2711P-T12W22D9P-MOUNTING-KIT: RNCC: 3 | RNVC: 2

19 Dec 2022

5340-01-706-8059
Cushioning Pad

017068059
12582100: RNCC: 3 | RNVC: 2

20 Dec 2022

5340-01-601-8988
Butt Hinge Leaf

016018988
MS20001PY3-0400: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

26 Jan 2012

5340-01-622-1933
Mounting Bracket

016221933
FF510346: RNCC: 3 | RNVC: 9
FF510944: RNCC: 5 | RNVC: 2
FF510346: RNCC: 5 | RNVC: 9

1 Oct 2013

5340-01-711-0591
Mechanical Stop

017110591
LS1126153: RNCC: 3 | RNVC: 2

18 Jul 2023

5340-01-707-9237
Mounting Bracket

017079237
12647521: RNCC: 3 | RNVC: 2

3 Mar 2023

5340-01-706-0877
Access Cover

017060877
12638707-T: RNCC: 3 | RNVC: 2
12638707: RNCC: D | RNVC: 9

31 Oct 2022

5340-01-706-8930
Retaining Strap

017068930
7082407: RNCC: 3 | RNVC: 2

29 Dec 2022

5340-01-706-0867
Mounting Bracket

017060867
DTWG.101765.STC.05: RNCC: 3 | RNVC: 2

31 Oct 2022

5340-01-706-8828
Dust And Moisture Seal Protective Cap

017068828
1TD6312A21010-1001: RNCC: 3 | RNVC: 2

28 Dec 2022

5340-01-705-9237
Mounting Bracket

017059237
930-31575-2: RNCC: 3 | RNVC: 2
930-31575: RNCC: D | RNVC: 9

21 Oct 2022

5340-01-699-1031
Cover Strip

016991031
PAAI000141: RNCC: 3 | RNVC: 2
DAAK018463 REV - SEQ 012: RNCC: D | RNVC: 9

7 Jan 2022

5340-01-698-0544
Loop Clamp

016980544
30-302-2D19J11: RNCC: 3 | RNVC: 2
30-302-2D19J11: RNCC: 5 | RNVC: 2
30-302-2D19J11: RNCC: 5 | RNVC: 2
30-302-2D19J11: RNCC: 5 | RNVC: 2
30-302-2D19J11: RNCC: 5 | RNVC: 2

26 Oct 2021

5340-00-229-4322
Butt Hinge

002294322
MS27958-30: RNCC: 2 | RNVC: 2
MS27958: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-00-244-7325
Strapping Seal

002447325
C15499: RNCC: 3 | RNVC: 2
04248101: RNCC: 5 | RNVC: 2
C-154: RNCC: 5 | RNVC: 2
C25499: RNCC: 5 | RNVC: 2
MC254: RNCC: 5 | RNVC: 2
MCD4122ITEM5: RNCC: 5 | RNVC: 9
04248101: RNCC: 5 | RNVC: 9
MCD4122ITEM5: RNCC: 5 | RNVC: 9

1 Jan 1961

5340-01-710-7445
Nut And Bolt Locking Plate

017107445
71P340356-2001: RNCC: 3 | RNVC: 2

21 Jun 2023

5340-01-663-1797
Bow Handle

016631797
AR901725: RNCC: 3 | RNVC: 2
3326354: RNCC: 3 | RNVC: 2
3326354 75Q65: RNCC: 7 | RNVC: 2

28 Apr 2017

5340-01-295-3083
Loop Clamp

012953083
M85052/2-5: RNCC: 2 | RNVC: 2
MIL-DTL-85052/2: RNCC: 4 | RNVC: 1
TA026000105EP: RNCC: 5 | RNVC: 1
MIL-C-85052/2B: RNCC: 5 | RNVC: 9

3 Mar 1989

5340-00-435-3104
Loop Clamp

004353104
MS9351-05: RNCC: 2 | RNVC: 2
MS9351: RNCC: 4 | RNVC: 1
5340PL0811483: RNCC: 6 | RNVC: 9
702-990128-283: RNCC: C | RNVC: 1

21 Mar 1969

5340-00-240-2340
Shelf Bracket

002402340
BHMA-A156.16: RNCC: 3 | RNVC: 1
BHMA-A156.16 B04041 10X12: RNCC: 3 | RNVC: 2
A-A-465: RNCC: 5 | RNVC: 9
FFH111: RNCC: 5 | RNVC: 9
A156.16: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-708-9332
Access Cover

017089332
74A202103-1002: RNCC: 3 | RNVC: 2
74A202103: RNCC: D | RNVC: 9

2 May 2023

5340-01-242-1027
Electrical-Mechanical Equipment Post

012421027
NAS1829: RNCC: 3 | RNVC: 1
NAS1829A3C04: RNCC: 3 | RNVC: 2
9724A0440-16: RNCC: C | RNVC: 1

7 Oct 1986

5340-00-205-5810
Rod End Clevis

002055810
AN665-115R: RNCC: 2 | RNVC: 2
MIL-DTL-5683: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-01-700-7566
Utility Resilient Mount

017007566
VMB-4030H: RNCC: 3 | RNVC: 2

12 Apr 2022

5340-00-282-7537
Loop Clamp

002827537
NASM21333: RNCC: 3 | RNVC: 1
MS21333-41: RNCC: 3 | RNVC: 2
13207E6701FN64: RNCC: 5 | RNVC: 2
TC192: RNCC: 5 | RNVC: 2
MS21333-41: RNCC: 5 | RNVC: 9
5340002827537: RNCC: 5 | RNVC: 9
5342PL0798915: RNCC: 6 | RNVC: 9
5340002827537: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-00-282-7028
Loop Clamp

002827028
CVC846-8: RNCC: 3 | RNVC: 2
110-026-4316: RNCC: 5 | RNVC: 2
91-98005-014: RNCC: 5 | RNVC: 9
8642813: RNCC: 5 | RNVC: 9
T6-8: RNCC: 5 | RNVC: 9
242-790-14: RNCC: 5 | RNVC: 9
242B1280: RNCC: 5 | RNVC: 9
242B325: RNCC: 5 | RNVC: 9
54-4775-42: RNCC: 5 | RNVC: 9
291AS253-6: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-021-5332
Doorstop

000215332
BHMA-A156.16: RNCC: 3 | RNVC: 1
BHMA-A156.16 L02032: RNCC: 3 | RNVC: 2
ANSI A156.16 P/N L02032: RNCC: 5 | RNVC: 9
CD7071F8: RNCC: 5 | RNVC: 9
DP7071A5: RNCC: 5 | RNVC: 9

10 May 1968

5340-01-710-8694
Mechanic Equipment Hardware Kit

017108694
1676480C91: RNCC: 3 | RNVC: 2

5 Jul 2023

5340-01-710-7605
Manual Control Handle

017107605
801-6408780-ITEM-55: RNCC: 3 | RNVC: 2
6408780: RNCC: D | RNVC: 9

22 Jun 2023

5340-01-710-9114
Mounting Bracket

017109114
12664032: RNCC: 3 | RNVC: 2
12664032: RNCC: C | RNVC: 1

7 Jul 2023

5340-01-710-8833
Loop Clamp

017108833
S340CT20: RNCC: 3 | RNVC: 2
261739: RNCC: 5 | RNVC: 2
8485828: RNCC: D | RNVC: 9

5 Jul 2023

5340-01-710-7794
Mounting Plate

017107794
D1-55238D-2: RNCC: 3 | RNVC: 2
D1-55238D: RNCC: D | RNVC: 9

23 Jun 2023

5340-01-710-7643
Mounting Bracket

017107643
12664064: RNCC: 3 | RNVC: 2
12664064: RNCC: C | RNVC: 1

22 Jun 2023

5340-01-701-3143
Radiacmeter Subassembly

017013143
V055706: RNCC: 3 | RNVC: 2

10 May 2022

5340-01-711-0035
Mounting Plate

017110035
8668264-019: RNCC: 3 | RNVC: 2
565-8668264: RNCC: D | RNVC: 9

13 Jul 2023

5340-01-710-9802
Loop Clamp

017109802
12277381-1: RNCC: 3 | RNVC: 2
12277381-1: RNCC: 5 | RNVC: 2
12277381 FIND 5: RNCC: C | RNVC: 1
12277381: RNCC: D | RNVC: 9

12 Jul 2023

5340-01-710-9788
Mounting Bracket

017109788
12375543: RNCC: 3 | RNVC: 2
12375543: RNCC: C | RNVC: 1

12 Jul 2023

5340-01-710-9652
Mounting Bracket

017109652
07138: RNCC: 3 | RNVC: 2
4650426: RNCC: 7 | RNVC: 2

11 Jul 2023

5340-01-710-9472
Mounting Bracket

017109472
EP-0031407: RNCC: 3 | RNVC: 2

10 Jul 2023

5340-01-234-2905
Electrical-Mechanical Equipment Post

012342905
NAS1831: RNCC: 3 | RNVC: 1
NAS1831B4B16: RNCC: 3 | RNVC: 2
688015-112: RNCC: E | RNVC: 8

13 Jun 1986

5340-00-071-3830
Dust And Moisture Seal Protective Plug

000713830
5659-6: RNCC: 3 | RNVC: 2
19074P11: RNCC: 5 | RNVC: 2
5659-6: RNCC: 5 | RNVC: 2
1918-121150-045: RNCC: 5 | RNVC: 2
TMA-38-N: RNCC: 5 | RNVC: 2
909734209: RNCC: 5 | RNVC: 2
TMA 38 N: RNCC: 5 | RNVC: 2
1918-121150-045: RNCC: 5 | RNVC: 9
5659-6: RNCC: 5 | RNVC: 9
10078605: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-01-410-9088
Spacing Threaded Standoff

014109088
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C5C40: RNCC: 3 | RNVC: 2

15 Mar 1995

5340-01-174-1147
Angle Bracket

011741147
871651-B: RNCC: 3 | RNVC: 2
806314: RNCC: 5 | RNVC: 2
806314 PC 320: RNCC: 5 | RNVC: 9

14 Mar 1984

5340-00-190-6771
Retaining Strap

001906771
NASM760: RNCC: 3 | RNVC: 1
MS35140-21: RNCC: 3 | RNVC: 2
FF-S-760: RNCC: 5 | RNVC: 9
MS35140-21: RNCC: 5 | RNVC: 9
PTMC300: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-475-8177
Compression Cup

004758177
461525004000-562: RNCC: 3 | RNVC: 2
25004000-562 P4615: RNCC: 5 | RNVC: 2
2500-4000-562: RNCC: 5 | RNVC: 9
2500-4000-562: RNCC: 5 | RNVC: 9
2500-4000-562: RNCC: C | RNVC: 1
311378: RNCC: C | RNVC: 1

9 Jun 1974

5340-00-187-8179
Turnbuckle

001878179
ASTM-F1145: RNCC: 3 | RNVC: 1
ASTM-F1145-I1D 5/8X9: RNCC: 3 | RNVC: 2
FF-T-791: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-491-0714
Angle Bracket

004910714
209-060-159-008: RNCC: 3 | RNVC: 2
209-060-159-8: RNCC: 5 | RNVC: 2

26 Sep 1969

5340-00-187-8190
Turnbuckle

001878190
FFT791-TY1-FM1-CL4-7/8X18: RNCC: 2 | RNVC: 2
FF-T-791: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-01-343-8698
Plain Solid Disk

013438698
ASTM B209/B209M: RNCC: 3 | RNVC: 1
ASTM B209/B209M(AL 1100 DIA 11.0: RNCC: 3 | RNVC: 2
QQ-A-250/1: RNCC: 5 | RNVC: 9

17 Aug 1991

5340-00-800-7685
Dust And Moisture Seal Protective Plug

008007685
8803859: RNCC: 3 | RNVC: 2
2089043-0707: RNCC: 5 | RNVC: 1
EC-19: RNCC: 5 | RNVC: 1
025-0499-000: RNCC: 5 | RNVC: 2
EC-19: RNCC: 5 | RNVC: 2
91793371: RNCC: 5 | RNVC: 2
191722386: RNCC: 5 | RNVC: 2
A1256516: RNCC: 5 | RNVC: 2
2061K72P006: RNCC: 5 | RNVC: 2
2089043-0707: RNCC: 5 | RNVC: 2

1 Jan 1962

5340-01-711-0407
Engine Plate

017110407
12647441: RNCC: 3 | RNVC: 2

17 Jul 2023

5340-01-126-9812
Loop Clamp

011269812
M85052/3-22: RNCC: 2 | RNVC: 2
MIL-DTL-85052/3: RNCC: 4 | RNVC: 1
TA026000122HC: RNCC: 5 | RNVC: 1
9M972-22S: RNCC: 5 | RNVC: 1
MIL-C-85052/3: RNCC: 5 | RNVC: 9
10112508: RNCC: 6 | RNVC: 9

21 Feb 1982

5340-01-702-7918
Snap-In Threaded Standoff

017027918
8110-448-032: RNCC: 3 | RNVC: 2
102054689: RNCC: 5 | RNVC: 2

28 Jul 2022

5340-01-698-8415
Mounting Bracket

016988415
8287150-02: RNCC: 3 | RNVC: 2
8287142/ PC 16: RNCC: C | RNVC: 1
8287150-4: RNCC: C | RNVC: 1

14 Dec 2021

5340-01-703-0947
Loop Clamp

017030947
9NG0012H11R: RNCC: 3 | RNVC: 2
40005SS11HS: RNCC: 5 | RNVC: 2
TA022005HO11HW: RNCC: 5 | RNVC: 2

16 Aug 2022

5340-01-698-0386
Loop Clamp

016980386
30-302-2D20J23: RNCC: 3 | RNVC: 2
30-302-2D20J23: RNCC: 5 | RNVC: 2
30-302-2D20J23: RNCC: 5 | RNVC: 2
30-302-2D20J23: RNCC: 5 | RNVC: 2
30-302-2D20J23: RNCC: 5 | RNVC: 2

26 Oct 2021

5340-01-643-2517
Nut And Bolt Retainer

016432517
NAS578: RNCC: 3 | RNVC: 1
NAS578C10B: RNCC: 3 | RNVC: 2

25 Mar 2015

5340-01-553-8219
Rectangula Clamp(1)

015538219
30-302-2C12J16: RNCC: 1 | RNVC: 2
30-302-2C12J16: RNCC: 3 | RNVC: 2
30-302-2C12J16: RNCC: 3 | RNVC: 2
30-302-2C12J16: RNCC: 3 | RNVC: 2
30-302-2C12J16: RNCC: 3 | RNVC: 2
30-302: RNCC: D | RNVC: 9

26 Jul 2007

5340-01-468-6658
Safety Cable Kit

014686658
SAE-AS3509: RNCC: 3 | RNVC: 1
AS3509-0218K: RNCC: 3 | RNVC: 2
AS3509-0218K: RNCC: 3 | RNVC: 9

19 Oct 1999

5340-00-917-8296
Mounting Plate

009178296
12279489: RNCC: 3 | RNVC: 2
TC105A: RNCC: 3 | RNVC: 9
5M00389320: RNCC: 5 | RNVC: 2
C917038/001: RNCC: 5 | RNVC: 2
917038/001: RNCC: 5 | RNVC: 2
AMG254180: RNCC: 5 | RNVC: 2
389320: RNCC: 5 | RNVC: 2
254180: RNCC: 5 | RNVC: 2
739196-01: RNCC: 5 | RNVC: 2
C7715-1: RNCC: 7 | RNVC: 2

1 Aug 1966

5340-01-705-4810
Extension Drawer Slide

017054810
A5610-0152-P: RNCC: 3 | RNVC: 2
A5610-0156-P: RNCC: 3 | RNVC: 2
14512488: RNCC: 5 | RNVC: 2
14512488-P: RNCC: 5 | RNVC: 2
A5610-0156: RNCC: 5 | RNVC: 9

21 Sep 2022

5340-01-700-0307
Spring Tension Clip

017000307
L3022244-027: RNCC: 3 | RNVC: 2

11 Mar 2022

5340-01-700-0296
Spring Tension Clip

017000296
L3022244-094: RNCC: 3 | RNVC: 2

11 Mar 2022

5340-01-697-7775
Retaining Strap

016977775
SRPV2200381-103: RNCC: 3 | RNVC: 2

8 Oct 2021

5340-01-711-0494
Loop Clamp

017110494
2081: RNCC: 3 | RNVC: 2
4541601: RNCC: 5 | RNVC: 9

17 Jul 2023

5340-00-240-2584
Strap Hinge

002402584
BHMA-A156.20: RNCC: 3 | RNVC: 1
BHMA-A156.20 A81221 4IN: RNCC: 3 | RNVC: 2
FFH116ANDTYPE2203: RNCC: 5 | RNVC: 9
A156-.20 A81221 4INCH: RNCC: 5 | RNVC: 9
MS27972-20: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-710-9763
Mounting Plate

017109763
5-13-10529-2: RNCC: 3 | RNVC: 2
5-13-10529-2: RNCC: 5 | RNVC: 2
5-13-10529: RNCC: D | RNVC: 9

12 Jul 2023

5340-01-710-8622
Angle Bracket

017108622
12641872: RNCC: 3 | RNVC: 2
12641872: RNCC: C | RNVC: 1

3 Jul 2023

5340-01-710-9601
Mounting Plate

017109601
8902539-1: RNCC: 3 | RNVC: 2
8902539: RNCC: D | RNVC: 9

11 Jul 2023

5340-01-710-9513
Rod End Clevis

017109513
L077130200: RNCC: 3 | RNVC: 2

11 Jul 2023

5340-01-710-8075
Cushioning Pad

017108075
12242-5216-04: RNCC: 3 | RNVC: 2
12242-5216: RNCC: D | RNVC: 9

27 Jun 2023

5340-01-710-7764
Mounting Bracket

017107764
12645997: RNCC: 3 | RNVC: 2
12645997: RNCC: C | RNVC: 1

23 Jun 2023

5340-01-710-9503
Multiple Angle Bracket

017109503
5-13-10491-2: RNCC: 3 | RNVC: 2
5-13-10491: RNCC: D | RNVC: 9

11 Jul 2023

5340-01-710-7870
Access Cover

017107870
752229: RNCC: 3 | RNVC: 2

26 Jun 2023

5340-01-710-9162
Multiple Angle Bracket

017109162
2847M87G01: RNCC: 3 | RNVC: 2
2847M87: RNCC: D | RNVC: 9

7 Jul 2023

5340-01-710-7599
Mounting Bracket

017107599
12640219: RNCC: 3 | RNVC: 2
12640219: RNCC: C | RNVC: 1

22 Jun 2023

5340-01-710-7377
Angle Bracket

017107377
801-7108440-ITEM-11: RNCC: 3 | RNVC: 2
2620-286-53-ITEM-11: RNCC: C | RNVC: 1
7108440: RNCC: D | RNVC: 9

21 Jun 2023

5340-01-703-4360
Mounting Bracket

017034360
13102625-2: RNCC: 3 | RNVC: 2

7 Sep 2022

5340-01-703-3889
Cushioning Pad

017033889
MU1302009: RNCC: 3 | RNVC: 2

2 Sep 2022

5340-01-699-1642
Block Clamp

016991642
3671213U01211-3: RNCC: 3 | RNVC: 1

13 Jan 2022

5340-01-703-2010
Vehicle Cargo Tie Down

017032010
12613960: RNCC: 3 | RNVC: 2
12613960: RNCC: 5 | RNVC: 9

23 Aug 2022

5340-01-705-3767
Mounting Bracket

017053767
NGB550EV03012HR: RNCC: 3 | RNVC: 2
NGB550EV03012HR: RNCC: 5 | RNVC: 2

16 Sep 2022

5340-01-705-3312
Utility Access Door

017053312
5-13-11026-2: RNCC: 3 | RNVC: 2
5-13-11026: RNCC: D | RNVC: 9

14 Sep 2022

5340-01-705-3230
Access Cover

017053230
863-000095: RNCC: 3 | RNVC: 2
863-000095: RNCC: 5 | RNVC: 9

13 Sep 2022

5340-01-703-3907
Retaining Strap

017033907
336714-1: RNCC: 3 | RNVC: 2

2 Sep 2022

5340-01-705-3839
Butt Hinge

017053839
0200665-6: RNCC: 3 | RNVC: 2
0200665: RNCC: D | RNVC: 9

17 Sep 2022

5340-01-703-2531
Mounting Bracket

017032531
RTT3410-LIGBRKT-L-NP: RNCC: 3 | RNVC: 2

25 Aug 2022

5340-01-703-0783
Mounting Bracket

017030783
12600705: RNCC: 3 | RNVC: 2
12600705: RNCC: 3 | RNVC: 2

16 Aug 2022

5340-01-686-6257
Butt Hinge Leaf

016866257
MS20001PY5-750: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

26 Feb 2020

5340-01-703-1932
Cushioning Pad

017031932
12580962: RNCC: 3 | RNVC: 2

22 Aug 2022

5340-01-212-0171
Angle Bracket

012120171
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-065: RNCC: 3 | RNVC: 2
MS9593-065: RNCC: 5 | RNVC: 9

5 Jul 1985

5340-01-167-5577
Loop Clamp

011675577
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C29KH: RNCC: 3 | RNVC: 2
MS9350-28: RNCC: 5 | RNVC: 9

30 Nov 1983

5340-01-235-2543
Electrical-Mechanical Equipment Post

012352543
NAS1829: RNCC: 3 | RNVC: 1
NAS1829A4E32: RNCC: 3 | RNVC: 2
GE16291: RNCC: C | RNVC: 1

26 Jun 1986

5340-00-009-0520
Loop Clamp

000090520
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C16A: RNCC: 3 | RNVC: 2

29 Jul 1972

5340-01-628-1823
Lead Clamp Assy

016281823
HAN6563G1(SE): RNCC: 3 | RNVC: 1
HAN 6563G1: RNCC: 3 | RNVC: 2
HAN6563G1 SE: RNCC: 5 | RNVC: 9

13 May 2014

5340-01-699-3793
Corrosion Preventive Anode

016993793
4 590 07 001 001: RNCC: 3 | RNVC: 2

26 Jan 2022

5340-00-282-7507
Loop Clamp

002827507
NASM21333: RNCC: 3 | RNVC: 1
MS21333-61: RNCC: 3 | RNVC: 2
MS21333-61: RNCC: 5 | RNVC: 9
5340002827507: RNCC: 5 | RNVC: 9
5340002827507: RNCC: 6 | RNVC: 9
4B9302: RNCC: C | RNVC: 1

1 Jan 1963

5340-01-276-1787
Electrical-Mechanical Equipment Post

012761787
NAS1829: RNCC: 3 | RNVC: 1
NAS1829C4E17: RNCC: 3 | RNVC: 2

5 Apr 1988

5340-01-703-2022
Access Cover

017032022
5-13-10844-1: RNCC: 3 | RNVC: 2

23 Aug 2022

5340-01-705-3311
Dust And Moisture Seal Protective Cap

017053311
100000751: RNCC: 3 | RNVC: 2
5802967134: RNCC: 5 | RNVC: 2

14 Sep 2022

5340-01-705-3225
Utility Access Door

017053225
5-13-10517-1: RNCC: 3 | RNVC: 2
5-13-10517-1: RNCC: 5 | RNVC: 2
5-13-10517: RNCC: D | RNVC: 9

13 Sep 2022

5340-01-553-7046
Mounting Bracket

015537046
10059262: RNCC: 3 | RNVC: 2
13054499: RNCC: 3 | RNVC: 2
10059262 REV B: RNCC: D | RNVC: 9

24 Jul 2007

5340-00-301-7227
Utility Resilient Mount

3 Oct 1973

5340-01-406-3778
Mounting Plate

014063778
002828: RNCC: 3 | RNVC: 2
002828: RNCC: 5 | RNVC: 2
547A002828: RNCC: 5 | RNVC: 9
2828: RNCC: 5 | RNVC: 9

31 Dec 1994

5340-01-131-8205
Loop Clamp

011318205
M85052/1-24: RNCC: 2 | RNVC: 2
MIL-DTL-85052/1: RNCC: 4 | RNVC: 1
TA026-0001-24NB: RNCC: 5 | RNVC: 1
S651NB-24: RNCC: 5 | RNVC: 1
JM44LC73WPH24YN: RNCC: 5 | RNVC: 1
1444PHW24Y: RNCC: 5 | RNVC: 1
SS7563-24NBC: RNCC: 5 | RNVC: 1
MIL-C-85052/1: RNCC: 5 | RNVC: 9
S664NB24: RNCC: 5 | RNVC: 9
JM44LC70WPH24YN: RNCC: 5 | RNVC: 9

17 May 1982

5340-01-707-0654
Electronic Equipment Hardware Kit

017070654
19000691: RNCC: 3 | RNVC: 2

12 Jan 2023

5340-01-707-5028
Assembled Nut Retainer Ring

017075028
1003276: RNCC: 3 | RNVC: 2

6 Feb 2023

5340-01-706-6000
Mounting Bracket

017066000
581-5516: RNCC: 3 | RNVC: 2

7 Dec 2022

5340-01-706-5901
Block Fairlead

017065901
72319-102: RNCC: 3 | RNVC: 2

7 Dec 2022

5340-01-705-7593
Mounting Bracket

017057593
8449384-1: RNCC: 3 | RNVC: 2

11 Oct 2022

5340-01-705-7606
Mounting Bracket

017057606
8451970-14: RNCC: 3 | RNVC: 2

11 Oct 2022

5340-01-705-7603
Mounting Bracket

017057603
8451970-10: RNCC: 3 | RNVC: 2

11 Oct 2022

5340-01-705-7469
Grommet Assembly

017057469
1701M39P04: RNCC: 3 | RNVC: 2

7 Oct 2022

5340-01-707-0064
Mounting Bracket

017070064
VMS-01-XLT1: RNCC: 3 | RNVC: 2
A18632: RNCC: 5 | RNVC: 2

9 Jan 2023

5340-01-706-3709
Mechanical Stop

017063709
9951.0300: RNCC: 3 | RNVC: 2

18 Nov 2022

5340-01-706-6254
Nut And Bolt Retainer

017066254
NAS578-24B: RNCC: 3 | RNVC: 2
NAS578 REV 10: RNCC: D | RNVC: 9

8 Dec 2022

5340-01-706-6819
Dust And Moisture Seal Protective Cap-Plug

017066819
IPT3181-12CFMB: RNCC: 3 | RNVC: 2

13 Dec 2022

5340-01-706-6902
Retaining Clip

017066902
301-7790: RNCC: 3 | RNVC: 2

13 Dec 2022

5340-01-707-7095
Retaining Band

017077095
24.730.060: RNCC: 3 | RNVC: 2
24.730.060: RNCC: 5 | RNVC: 2

17 Feb 2023

5340-01-132-3816
Retaining Strap

011323816
NAS1677: RNCC: 3 | RNVC: 1
NAS1677D20-43N: RNCC: 3 | RNVC: 2
10112624: RNCC: 6 | RNVC: 9

26 May 1982

5340-01-706-5172
Block Clamp

017065172
138-8239: RNCC: 3 | RNVC: 2

2 Dec 2022

5340-01-708-0247
Loop Clamp

017080247
117-7637: RNCC: 3 | RNVC: 2
A04761: RNCC: 5 | RNVC: 2

10 Mar 2023

5340-01-706-4803
Mounting Bracket

017064803
494-6133: RNCC: 3 | RNVC: 2

29 Nov 2022

5340-01-707-1515
Grommet Assembly

017071515
ACA3538-1: RNCC: 3 | RNVC: 2

19 Jan 2023

5340-01-707-9357
Lock-Release Lever

017079357
E3-151-15: RNCC: 3 | RNVC: 2

6 Mar 2023

5340-01-707-1362
Bumper

017071362
F-729-02577: RNCC: 3 | RNVC: 2

18 Jan 2023

5340-01-707-4331
Spring Tension Clip

017074331
83C6483-6: RNCC: 3 | RNVC: 2

1 Feb 2023

5340-01-707-4168
Clamping Catch

017074168
R4-30-22-301-20: RNCC: 3 | RNVC: 2

1 Feb 2023

5340-01-534-2112
Retaining Strap

015342112
NAS1711: RNCC: 3 | RNVC: 1
NAS1711C16-28N: RNCC: 3 | RNVC: 2

12 Oct 2005

5340-01-708-1367
Extension Drawer Slide

017081367
515QD-24-P: RNCC: 3 | RNVC: 2

16 Mar 2023

5340-01-705-5635
Grommet Assembly

017055635
1773M11P03: RNCC: 3 | RNVC: 2

27 Sep 2022

5340-01-707-4365
Spring Tension Clip

017074365
83C6483-5: RNCC: 3 | RNVC: 2

2 Feb 2023

5340-01-707-2133
Valve Locking Device

017072133
S3476: RNCC: 3 | RNVC: 2
S3476: RNCC: 5 | RNVC: 2

23 Jan 2023

5340-01-136-8392
Angle Bracket

011368392
SAE-AS9592: RNCC: 3 | RNVC: 1
MS9592-380: RNCC: 3 | RNVC: 2
MS9592-380: RNCC: 5 | RNVC: 9
5342PL0212983: RNCC: 6 | RNVC: 9
MS9592-379: RNCC: E | RNVC: 8

17 Aug 1982

5340-01-142-9989
Loop Clamp

011429989
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D10-22T: RNCC: 3 | RNVC: 2

24 Nov 1982

5340-01-543-7867
Sealing Plug Assembly

015437867
SAE-AS3585: RNCC: 3 | RNVC: 1
AS3585-04: RNCC: 3 | RNVC: 2
AS3585-04: RNCC: 3 | RNVC: 9

21 Sep 2006

5340-01-015-9017
Spring Tension Clip

010159017
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-235: RNCC: 3 | RNVC: 2
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066/2-235: RNCC: 5 | RNVC: 9

30 Jan 1976

5340-01-546-1296
Loop Clamp

015461296
NAS1714: RNCC: 3 | RNVC: 1
NAS1714D2-13N: RNCC: 3 | RNVC: 2

7 Dec 2006

5340-01-167-9878
Loop Clamp

011679878
NAS1712: RNCC: 3 | RNVC: 1
NAS1712C7-14S: RNCC: 3 | RNVC: 2
10112849: RNCC: 6 | RNVC: 9

9 Dec 1983

5340-01-174-8391
Bow Handle

011748391
NASM39087: RNCC: 3 | RNVC: 1
MS39087-413CB: RNCC: 3 | RNVC: 2
MS39087-413CB: RNCC: 5 | RNVC: 9
MS39087-206CB: RNCC: 5 | RNVC: 9

23 Mar 1984

5340-01-183-2759
Spring Tension Clip

011832759
90095-991: RNCC: 3 | RNVC: 9
100400417: RNCC: 5 | RNVC: 2
HE010815: RNCC: 5 | RNVC: 2
010815: RNCC: 5 | RNVC: 2
100400417: RNCC: 5 | RNVC: 9
1536150-643: RNCC: 5 | RNVC: 9
1308328: RNCC: 5 | RNVC: 9

4 Jul 1984

5340-00-019-9503
Loop Clamp

000199503
9M9972-12N: RNCC: 3 | RNVC: 2
9M972-12N: RNCC: 5 | RNVC: 2
JM44LC70WPH12YN: RNCC: 5 | RNVC: 2
9M972-12N: RNCC: 5 | RNVC: 2
S664NB12: RNCC: 5 | RNVC: 2
JM44LC33S12T: RNCC: 5 | RNVC: 9
23C100-12T: RNCC: 5 | RNVC: 9
830-12T: RNCC: 5 | RNVC: 9
10117229: RNCC: 6 | RNVC: 9
1444PHW12Y: RNCC: C | RNVC: 1

17 Oct 1972

5340-01-178-6865
Electronic Equipment Hardware Kit

011786865
12273407: RNCC: 1 | RNVC: 2
D110550: RNCC: 3 | RNVC: 2
D110550: RNCC: 5 | RNVC: 2
124209: RNCC: 5 | RNVC: 2
D110550: RNCC: 5 | RNVC: 2
019201-1: RNCC: 5 | RNVC: 9
CN-L0084-001: RNCC: 5 | RNVC: 9
654125-1: RNCC: 5 | RNVC: 9
951365-1: RNCC: 5 | RNVC: 9
11200130-1: RNCC: 5 | RNVC: 9

9 May 1984

5340-00-251-7971
Bail Handle

002517971
NASM35791: RNCC: 3 | RNVC: 1
MS35791-1: RNCC: 3 | RNVC: 2
CD1205K3 1-2: RNCC: 5 | RNVC: 1
1205K3-1-2: RNCC: 5 | RNVC: 1
MS35791-1: RNCC: 5 | RNVC: 9
1205: RNCC: 5 | RNVC: 9
5340PL0642696: RNCC: 6 | RNVC: 9
5585734HPIECE87: RNCC: C | RNVC: 1

1 Jan 1963

5340-01-187-9402
Snap Hook

011879402
NASM43770/1: RNCC: 3 | RNVC: 1
M43770/1-SWZE4: RNCC: 3 | RNVC: 2
MIL-S-43770/1: RNCC: 5 | RNVC: 9
M43770/1-SWZE4: RNCC: 5 | RNVC: 9

29 Aug 1984

5340-01-187-8956
Spacing Threaded Standoff

011878956
NAS1831: RNCC: 3 | RNVC: 1
NAS1831B3B04: RNCC: 3 | RNVC: 2

27 Aug 1984

5340-01-653-6122
Loop Clamp

016536122
10010: RNCC: 3 | RNVC: 2
BM050767: RNCC: 5 | RNVC: 2
QF10010: RNCC: 5 | RNVC: 2
4108338: RNCC: 5 | RNVC: 2
10004A0118: RNCC: 7 | RNVC: 2

30 Mar 2016

5340-01-193-0465
Bow Handle

011930465
NASM39087: RNCC: 3 | RNVC: 1
MS39087-304AN: RNCC: 3 | RNVC: 2
MS39087-304AN: RNCC: 5 | RNVC: 9
MS39087-103AN: RNCC: 5 | RNVC: 9

29 Oct 1984

5340-00-026-2083
Spring Tension Clip

000262083
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-232: RNCC: 3 | RNVC: 2
NAS1463: RNCC: 5 | RNVC: 1
100-300-12-3: RNCC: 5 | RNVC: 2
107306-18: RNCC: 5 | RNVC: 2
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066-2-232: RNCC: 5 | RNVC: 9
5340004861924: RNCC: 5 | RNVC: 9
6018-98CC: RNCC: 5 | RNVC: 9
457-5671: RNCC: 6 | RNVC: 9

24 Oct 1972

5340-00-480-9074
Loop Clamp

004809074
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D16-40N: RNCC: 3 | RNVC: 2

14 Jun 1974

5340-00-297-6581
Snap Hook

002976581
NASM43770/6: RNCC: 3 | RNVC: 1
M43770/6-CCBC1: RNCC: 3 | RNVC: 2
NASN43770: RNCC: 5 | RNVC: 2
M43770/6-CCBC1: RNCC: 5 | RNVC: 9
MIL-S-43770: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-027-8738
Loop Clamp

000278738
MS9025-04: RNCC: 2 | RNVC: 2
MS9025: RNCC: 4 | RNVC: 1

1 Jan 1960

5340-00-255-4423
Expansion Plug

002554423
5139989: RNCC: 3 | RNVC: 2
1DD273: RNCC: 5 | RNVC: 2
1DD273: RNCC: 5 | RNVC: 9
5340002554423: RNCC: 5 | RNVC: 9
4730PL0943847: RNCC: 6 | RNVC: 9

15 Jun 1973

5340-00-449-3100
Spacing Threaded Standoff

004493100
12273461: RNCC: 1 | RNVC: 2
D110551: RNCC: 3 | RNVC: 2
12704307: RNCC: 5 | RNVC: 9
105115: RNCC: 5 | RNVC: 9
D110551: RNCC: 5 | RNVC: 9
2804092-2: RNCC: 5 | RNVC: 9
073-008421-001: RNCC: 5 | RNVC: 9
V515-50049-1: RNCC: 5 | RNVC: 9
150471-01: RNCC: 5 | RNVC: 9
D110551: RNCC: 5 | RNVC: 9

8 May 1970

5340-00-332-4343
Snap Hook

003324343
NASM43770/12: RNCC: 3 | RNVC: 1
M43770/12-MIPE2: RNCC: 3 | RNVC: 2
NASM43770: RNCC: 5 | RNVC: 1
M43779/12-MIPE2: RNCC: 5 | RNVC: 9
M43770-12MIPE2: RNCC: 5 | RNVC: 9
MILS43770: RNCC: 5 | RNVC: 9

16 Dec 1973

5340-00-942-2208
Arched Cushion

009422208
SAE-AS9393: RNCC: 3 | RNVC: 1
MS9393-07: RNCC: 3 | RNVC: 2
MS9393-07: RNCC: 5 | RNVC: 9

11 Dec 1965

5340-00-912-6129
Loop Clamp

009126129
NAS1397: RNCC: 3 | RNVC: 1
NAS1397K4N: RNCC: 3 | RNVC: 2

1 Jan 1960

5340-00-912-2687
Loop Clamp

009122687
NASM21334: RNCC: 3 | RNVC: 1
MS21334-22: RNCC: 3 | RNVC: 2
MS21334-22: RNCC: 5 | RNVC: 9

1 Jan 1960

5340-00-899-2577
Rod End Locking Retainer

008992577
NAS1193: RNCC: 3 | RNVC: 1
NAS1193K8C: RNCC: 3 | RNVC: 2
NAS1193K8C: RNCC: 5 | RNVC: 2
5340PL1352830: RNCC: 6 | RNVC: 9

3 Feb 1967

5340-00-827-8314
Loop Clamp

008278314
NASM21333: RNCC: 3 | RNVC: 1
MS21333-33: RNCC: 3 | RNVC: 2
MS21333-33: RNCC: 5 | RNVC: 9
105244: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-937-1348
Instrument Mounting Clamp

009371348
NASM28042: RNCC: 3 | RNVC: 1
MS28042-3A: RNCC: 3 | RNVC: 2
6202-3: RNCC: 5 | RNVC: 2
MS28042-3A: RNCC: 5 | RNVC: 9
10117506: RNCC: 6 | RNVC: 9

22 Nov 1966

5340-00-809-1494
Loop Clamp

008091494
NASM21333: RNCC: 3 | RNVC: 1
MS21333-105: RNCC: 3 | RNVC: 2
MS21333-105: RNCC: 5 | RNVC: 2
7-300-000195: RNCC: 5 | RNVC: 2
5340008091494: RNCC: 5 | RNVC: 9
7-300-000195: RNCC: 5 | RNVC: 9
456720121905: RNCC: 6 | RNVC: 9
5342PL0715434: RNCC: 6 | RNVC: 9
5340008091494: RNCC: 6 | RNVC: 9

1 Jan 1962

5340-00-804-1238
Dust And Moisture Seal Protective Plug

008041238
NAS847: RNCC: 3 | RNVC: 1
NAS842-4A: RNCC: 3 | RNVC: 2
M5501/2-4: RNCC: 5 | RNVC: 9
MILC5501TYPE1CLASSCSIZE4: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-00-662-9817
Antipilferage Seal

006629817
ACE: RNCC: 3 | RNVC: 2
63077-5340-4: RNCC: 3 | RNVC: 2
MILS23769: RNCC: 4 | RNVC: 1
FF-S-2738: RNCC: 4 | RNVC: 1
FF-S-2738A: RNCC: 5 | RNVC: 9
1485413: RNCC: C | RNVC: 1
2596782: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-939-8789
Clamping Catch

009398789
65302-12125-101: RNCC: 3 | RNVC: 2
65302-12125-101: RNCC: 5 | RNVC: 2
H9190-5: RNCC: 5 | RNVC: 2
65032-12125-101: RNCC: 5 | RNVC: 9
65302-12125-101: RNCC: 8 | RNVC: 2

16 Nov 1965

5340-00-809-1087
Butt Hinge Leaf

008091087
MS20001LPH10-7200: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
9M366H10: RNCC: 5 | RNVC: 9
70207-23012-116: RNCC: 5 | RNVC: 9
MS20001PH10-7200: RNCC: 5 | RNVC: 9
MS20001PN10-72: RNCC: 5 | RNVC: 9
9M366X10: RNCC: 5 | RNVC: 9
70207-23012-115: RNCC: 5 | RNVC: 9
9M366H10-7200: RNCC: 5 | RNVC: 9
MS2001PN10-72: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-01-606-0753
Retaining Strap

016060753
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C18W31N: RNCC: 3 | RNVC: 2

7 May 2012

5340-01-606-0760
Retaining Strap

016060760
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C24W38N: RNCC: 3 | RNVC: 2

7 May 2012

5340-01-684-3682
Dust And Moisture Seal Protective Cover

016843682
603775: RNCC: 1 | RNVC: 2
603775: RNCC: 3 | RNVC: 2
10473884: RNCC: 6 | RNVC: 9

30 Oct 2019

5340-01-011-9021
Mounting Bracket

010119021
10899002: RNCC: 3 | RNVC: 2
2910010119021: RNCC: 6 | RNVC: 9

2 Nov 1975

5340-01-709-0974
Helical Compression Spring Seat

017090974
845-6556340-1(SPC): RNCC: 3 | RNVC: 1
845-6556322ITEM18: RNCC: D | RNVC: 9

11 May 2023

5340-01-708-7478
Mounting Bracket

017087478
000-020-883-00: RNCC: 3 | RNVC: 2
000-020-883-00: RNCC: 5 | RNVC: 2

20 Apr 2023

5340-01-709-1787
Spacing Threaded Standoff

017091787
7027083: RNCC: 3 | RNVC: 1
7027083: RNCC: 5 | RNVC: 1

16 May 2023

5340-01-709-1785
Spacing Threaded Standoff

017091785
7027083: RNCC: 3 | RNVC: 1
7027083: RNCC: 5 | RNVC: 1

16 May 2023

5340-01-708-2256
Access Cover

017082256
289-0031MESF5: RNCC: 3 | RNVC: 2

23 Mar 2023

5340-01-709-1762
Spacing Threaded Standoff

017091762
7027083: RNCC: 3 | RNVC: 1
7027083: RNCC: 5 | RNVC: 1

16 May 2023

5340-01-710-6391
Utility Resilient Mount

017106391
MS21209-0815: RNCC: 3 | RNVC: 2

12 Jun 2023

5340-01-708-6728
Rig Connecting Link

017086728
CC74470-001: RNCC: 3 | RNVC: 2

16 Apr 2023

5340-01-710-5670
Bumper

017105670
13100996: RNCC: 3 | RNVC: 2

7 Jun 2023

5340-01-710-5052
Exhaust Duct

017105052
M0630-00000-045: RNCC: 3 | RNVC: 2

4 Jun 2023

5340-01-708-6678
Dust And Moisture Seal Protective Cover

017086678
MC21090: RNCC: 3 | RNVC: 2

15 Apr 2023

5340-01-365-8853
Electrical-Mechanical Equipment Post

013658853
NAS1831: RNCC: 3 | RNVC: 1
NAS1831-6E56: RNCC: 3 | RNVC: 2

19 Oct 1992

5340-00-057-3537
Rod End Clevis

000573537
104037: RNCC: 3 | RNVC: 2
19305D: RNCC: 3 | RNVC: 2
144242: RNCC: 3 | RNVC: 2
2A1963: RNCC: 3 | RNVC: 2
FS4064: RNCC: 3 | RNVC: 2
7607627: RNCC: 3 | RNVC: 2
VR2695: RNCC: 3 | RNVC: 2
0042676: RNCC: 3 | RNVC: 2
MS35812-3: RNCC: 3 | RNVC: 2
14398: RNCC: 3 | RNVC: 2

1 Jan 1963

5340-01-710-9800
Webbing Strap

017109800
6005-7-55: RNCC: 3 | RNVC: 2

12 Jul 2023

5340-01-710-9092
Mounting Bracket

017109092
SF650: RNCC: 3 | RNVC: 2

7 Jul 2023

5340-01-710-9082
Loop Clamp

017109082
TA05203SC1123CR: RNCC: 3 | RNVC: 2
TA05203SC1123CR: RNCC: 5 | RNVC: 2

7 Jul 2023

5340-01-710-8162
Retaining Strap

017108162
001-001918-000: RNCC: 3 | RNVC: 2

27 Jun 2023

5340-01-711-0736
Protection Bellows

017110736
MV39152: RNCC: 3 | RNVC: 2
4360298 ITEM 8: RNCC: D | RNVC: 9

19 Jul 2023

5340-01-497-2305
Padlock Set

014972305
F2827-A3-16: RNCC: 2 | RNVC: 2
FF-P-2827: RNCC: 4 | RNVC: 1
PL655-80M-120-LB: RNCC: 5 | RNVC: 1
112E1102G-1 ITEM SEQ 79: RNCC: 5 | RNVC: 9
0038G3085-1: RNCC: 5 | RNVC: 9
FF-P-2827A: RNCC: 5 | RNVC: 9
FF-P-2827-A-2: RNCC: 5 | RNVC: 9
23074882: RNCC: 5 | RNVC: 9
PL65580M120-LB: RNCC: C | RNVC: 1

14 May 2002

5340-01-697-6857
Loop Clamp

016976857
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D40KH: RNCC: 3 | RNVC: 2

5 Oct 2021

5340-01-708-6929
Dust And Moisture Seal Protective Cap

017086929
C736ACU4: RNCC: 3 | RNVC: 2
1017471: RNCC: 5 | RNVC: 2

17 Apr 2023

5340-01-708-2901
Spring Tension Clip

017082901
BL-17039-1: RNCC: 3 | RNVC: 2
BL17039-1: RNCC: 3 | RNVC: 2
BL17039-1: RNCC: 5 | RNVC: 2

28 Mar 2023

5340-01-708-4952
Grooved Clamp Coupling

017084952
NM102635-1450: RNCC: 3 | RNVC: 2

10 Apr 2023

5340-01-708-3840
Mounting Bracket

017083840
29546528: RNCC: 3 | RNVC: 2

3 Apr 2023

5340-01-708-3530
Grooved Clamp Coupling

017083530
1297M86P01: RNCC: 3 | RNVC: 2

31 Mar 2023

5340-01-708-6075
Runner

017086075
412-040-321-101: RNCC: 3 | RNVC: 2

13 Apr 2023

5340-01-708-2143
Shaft Collar

017082143
90200003: RNCC: 3 | RNVC: 2

22 Mar 2023

5340-01-708-3399
Retaining Clip

017083399
8M0007495: RNCC: 3 | RNVC: 2

30 Mar 2023

5340-01-709-2151
Loop Clamp

017092151
R5099P03: RNCC: 3 | RNVC: 2

17 May 2023

5340-01-709-2091
Utility Resilient Mount

017092091
WR16-706-06-BM: RNCC: 3 | RNVC: 2

17 May 2023

5340-01-708-3619
Electronic Equipment Hardware Kit

017083619
SRX1500-RMK: RNCC: 3 | RNVC: 2
92154402: RNCC: 5 | RNVC: 2

31 Mar 2023

5340-01-708-4842
Bumper

017084842
9546K185: RNCC: 3 | RNVC: 2
70083928: RNCC: 5 | RNVC: 2
614455: RNCC: 5 | RNVC: 2

10 Apr 2023

5340-01-708-5032
Permanent Magnet

017085032
8193: RNCC: 3 | RNVC: 2

11 Apr 2023

5340-01-408-8434
Padlock

014088434
AA59486-2IS01L: RNCC: 2 | RNVC: 2
A-A-59486: RNCC: 4 | RNVC: 1
100G: RNCC: 5 | RNVC: 1
5202: RNCC: 5 | RNVC: 1
7030LTNRKCH: RNCC: 5 | RNVC: 1
103: RNCC: 5 | RNVC: 9
00037325960351: RNCC: 5 | RNVC: 9
6001LJ: RNCC: 5 | RNVC: 9
7030: RNCC: 5 | RNVC: 9
103: RNCC: 5 | RNVC: 9

28 Feb 1995

5340-01-394-7393
Loop Clamp

013947393
352.152: RNCC: 3 | RNVC: 2
5013070A: RNCC: 5 | RNVC: 2
352.152: RNCC: 5 | RNVC: 9

15 Aug 1994

5340-01-709-0210
Angle Bracket

017090210
FHF 11239000: RNCC: 3 | RNVC: 2

5 May 2023

5340-01-710-3526
Mounting Bracket

017103526
16107198-031: RNCC: 3 | RNVC: 2

30 May 2023

5340-01-710-5562
Mounting Bracket

017105562
724E2221-111: RNCC: 3 | RNVC: 2

7 Jun 2023

5340-01-710-6401
Loop Clamp

017106401
J1431P15: RNCC: 3 | RNVC: 2

13 Jun 2023

5340-01-710-5364
Mounting Bracket

017105364
2073508-102: RNCC: 3 | RNVC: 2

6 Jun 2023

5340-01-710-4661
Mounting Bracket

017104661
16107361-002: RNCC: 3 | RNVC: 2

31 May 2023

5340-01-710-5505
Mounting Plate

017105505
600A57: RNCC: 3 | RNVC: 2
600A57: RNCC: 5 | RNVC: 2

7 Jun 2023

5340-01-710-5014
Mounting Plate

017105014
100020689: RNCC: 3 | RNVC: 2

2 Jun 2023

5340-01-709-0949
Loop Clamp

017090949
60020WDFR10: RNCC: 3 | RNVC: 2

11 May 2023

5340-01-710-6404
Loop Clamp

017106404
J1431P11: RNCC: 3 | RNVC: 2

13 Jun 2023

5340-01-710-6212
Dust And Moisture Seal Protective Plug

017106212
100019193: RNCC: 3 | RNVC: 2

12 Jun 2023

5340-01-708-4255
Threaded Rod End

017084255
5642-1135-11: RNCC: 3 | RNVC: 2

5 Apr 2023

5340-01-708-4985
Lock-Release Lever

017084985
S5809900: RNCC: 3 | RNVC: 2
S5809900: RNCC: 5 | RNVC: 2

10 Apr 2023

5340-01-709-1049
Mounting Bracket

017091049
ALBCBC 303 59-9: RNCC: 3 | RNVC: 2

11 May 2023

5340-01-708-4753
Manual Control Lever

017084753
S5834552: RNCC: 3 | RNVC: 2
S5834552: RNCC: 5 | RNVC: 2

8 Apr 2023

5340-00-469-1123
Access Cover

004691123
AD1126-4: RNCC: 3 | RNVC: 2
AD1126-4: RNCC: 3 | RNVC: 9
50127S4503-705797PC1717: RNCC: 5 | RNVC: 9
50127S4503-705797PC1717: RNCC: 5 | RNVC: 9
HS4503-3102155PC50: RNCC: 5 | RNVC: 9
SSK1S5501-3106636PC50: RNCC: 5 | RNVC: 9
S4504H3168219PC50: RNCC: 5 | RNVC: 9
HS4503-3102155PC50: RNCC: 5 | RNVC: 9
S4504H3168219PC50: RNCC: 5 | RNVC: 9
SSK1S5501-3106636PC50: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-01-205-9489
Electrical-Mechanical Equipment Post

012059489
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C5D64: RNCC: 3 | RNVC: 2
NAS1786C08-64: RNCC: 5 | RNVC: 9
8422-SS-0832-7: RNCC: 5 | RNVC: 9
8422-SS-0832-7: RNCC: C | RNVC: 1
NAS1831-5D64: RNCC: C | RNVC: 1
922486: RNCC: C | RNVC: 1

12 Apr 1985

5340-01-396-5286
Webbing Strap

013965286
NAS1212: RNCC: 3 | RNVC: 1
NAS1212R10BJ38: RNCC: 3 | RNVC: 2

21 Sep 1994

5340-00-969-4419
Spring Tension Clip

009694419
NAS1464: RNCC: 3 | RNVC: 1
NAS1464-024-03C: RNCC: 3 | RNVC: 2
6007-59C: RNCC: 5 | RNVC: 2
6007-59C: RNCC: 5 | RNVC: 9

15 Jun 1966

5340-01-383-3793
Loop Clamp

013833793
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D20-36N: RNCC: 3 | RNVC: 2

24 Nov 1993

5340-00-067-9888
Turnbuckle Body

000679888
MS21251-B10L: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1
NAS649B-175L: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-067-9885
Turnbuckle Body

000679885
MS21251-B8L: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-01-280-7061
Rod End Locking Retainer

012807061
NAS1193: RNCC: 3 | RNVC: 1
NAS1193E8C: RNCC: 3 | RNVC: 2

13 Jun 1988

5340-00-664-0399
Plug Button

006640399
NAS451: RNCC: 3 | RNVC: 1
NAS451-18: RNCC: 3 | RNVC: 2
432613: RNCC: 3 | RNVC: 2
NAS-451-18: RNCC: 3 | RNVC: 2
51045: RNCC: 5 | RNVC: 9
SS51045: RNCC: 5 | RNVC: 9
SS51045: RNCC: C | RNVC: 1
SS51045: RNCC: C | RNVC: 1
100-046S52Z1: RNCC: E | RNVC: 8
SS51045K2220: RNCC: E | RNVC: 8

1 Jan 1963

5340-00-652-3387
Synchro Clamp

006523387
109054-337: RNCC: 3 | RNVC: 2
1034574-3: RNCC: 3 | RNVC: 9
918337-5: RNCC: 5 | RNVC: 2
A2086-5: RNCC: 5 | RNVC: 2
918337-5: RNCC: 5 | RNVC: 2
FIT4180-5: RNCC: 5 | RNVC: 2
993905-02: RNCC: 5 | RNVC: 9
1047241-7: RNCC: 5 | RNVC: 9
134283-007: RNCC: 5 | RNVC: 9
024-005: RNCC: 5 | RNVC: 9

1 Jan 1963

5340-00-855-7737
Spring Tension Clip

008557737
NASM24066/2: RNCC: 3 | RNVC: 1
M24066/2-008: RNCC: 3 | RNVC: 2
MIL-C-24066/2: RNCC: 5 | RNVC: 9
M24066/2-208: RNCC: 5 | RNVC: 9
M24066/2-008: RNCC: 5 | RNVC: 9
MS17160-8: RNCC: 5 | RNVC: 9
6010-5CC/012: RNCC: 5 | RNVC: 9
MS17160-108: RNCC: 5 | RNVC: 9
100-300-14-2: RNCC: E | RNVC: 8

6 Oct 1967

5340-00-922-3377
Loop Clamp

009223377
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C3KH: RNCC: 3 | RNVC: 2
MS9350-02: RNCC: 5 | RNVC: 9

24 Apr 1968

5340-01-122-2076
Loop Clamp

011222076
M85052/3-9: RNCC: 2 | RNVC: 2
MIL-DTL-85052/3: RNCC: 4 | RNVC: 1
TA0260001-09HC: RNCC: 5 | RNVC: 1
MIL-C-85052/3: RNCC: 5 | RNVC: 9
10112421: RNCC: 6 | RNVC: 9

17 Nov 1981

5340-01-438-7902
Spacing Threaded Standoff

014387902
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A3B04: RNCC: 3 | RNVC: 2

20 Nov 1996

5340-00-170-1705
Angle Bracket

001701705
SAE-AS9593: RNCC: 3 | RNVC: 1
MS9593-014: RNCC: 3 | RNVC: 2
MS9593-013: RNCC: 5 | RNVC: 9
MS9593-014: RNCC: 5 | RNVC: 9
5340001701705: RNCC: 5 | RNVC: 9
5340001701705: RNCC: 6 | RNVC: 9

14 Feb 1973

5340-00-014-5987
Clamping Catch

000145987
TC-205-S: RNCC: 3 | RNVC: 2
CL-150-HTC: RNCC: 5 | RNVC: 2
0852 5010.001: RNCC: 5 | RNVC: 2
8525010.001: RNCC: 5 | RNVC: 2
205S: RNCC: 5 | RNVC: 9
205-S: RNCC: 5 | RNVC: 9
5340PL1937970: RNCC: 6 | RNVC: 9
2073377-0701: RNCC: 7 | RNVC: 2
80-010: RNCC: C | RNVC: 1
0N505509: RNCC: C | RNVC: 1

6 May 1968

5340-01-088-5382
Angle Bracket

010885382
SAE-AS7431: RNCC: 3 | RNVC: 1
AN743-13R: RNCC: 3 | RNVC: 2
AN743-13R: RNCC: 3 | RNVC: 9
AN743-13R: RNCC: 5 | RNVC: 9
10117609: RNCC: 6 | RNVC: 9

15 Jan 1980

5340-00-179-8926
Angle Bracket

001798926
SAE-AS9601: RNCC: 3 | RNVC: 1
MS9601-249: RNCC: 3 | RNVC: 2
MS9601-249: RNCC: 5 | RNVC: 9

19 Dec 1971

5340-01-278-9714
Electrical-Mechanical Equipment Post

012789714
NAS1831: RNCC: 3 | RNVC: 1
NAS1831H4B08: RNCC: 3 | RNVC: 2

11 May 1988

5340-01-087-5190
Loop Clamp

010875190
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D36KWX: RNCC: 3 | RNVC: 2
MS21122-36: RNCC: 5 | RNVC: 9
5340PL0847219: RNCC: 6 | RNVC: 9

19 Dec 1979

5340-01-313-4232
Butt Hinge Leaf

013134232
382211-6: RNCC: 3 | RNVC: 2
5340PL2023442: RNCC: 6 | RNVC: 9

9 Jan 1990

5340-00-831-8918
Friction Catch Stud Receptacle

008318918
113B2226P6: RNCC: 3 | RNVC: 2
A4893-012-24A: RNCC: 3 | RNVC: 9
A4893-012-24A: RNCC: 5 | RNVC: 2
113B2226P6 89954: RNCC: 7 | RNVC: 2

6 Sep 1967

5340-00-821-9839
Dust And Moisture Seal Protective Cap

008219839
9157827: RNCC: 1 | RNVC: 2
025-0478-000: RNCC: 3 | RNVC: 2
025-0478-000: RNCC: 5 | RNVC: 2
025-0478-000: RNCC: 5 | RNVC: 2
P31102: RNCC: 5 | RNVC: 9
831528-00: RNCC: 5 | RNVC: 9
3903746: RNCC: 5 | RNVC: 9
165-656: RNCC: 5 | RNVC: 9
MS90376-12YF: RNCC: 5 | RNVC: 9
10-70506-12: RNCC: 5 | RNVC: 9

1 Jan 1962

5340-01-706-9698
Retaining Strap

017069698
4W19087-101A: RNCC: 3 | RNVC: 2
4W19087: RNCC: D | RNVC: 9

6 Jan 2023

5340-00-083-5795
Catch Strike

000835795
8768712: RNCC: 3 | RNVC: 2
1025-083-5795: RNCC: 6 | RNVC: 9
1025000835795: RNCC: 6 | RNVC: 9

1 Jan 1963

5340-01-656-0436
Mounting Bracket

016560436
RAM-B-201U: RNCC: 3 | RNVC: 2
CV208548: RNCC: 5 | RNVC: 2
480370-000: RNCC: 5 | RNVC: 2
10406782: RNCC: 6 | RNVC: 9
F9799-000040: RNCC: 6 | RNVC: 9

15 Jun 2016

5340-00-486-1211
Loop Clamp

004861211
NAS1712: RNCC: 3 | RNVC: 1
NAS1712D48-18N: RNCC: 3 | RNVC: 2

19 Jun 1974

5340-01-103-0270
Loop Clamp

011030270
M85052/3-7: RNCC: 2 | RNVC: 2
MIL-DTL-85052/3: RNCC: 4 | RNVC: 1
TA026000107HC: RNCC: 5 | RNVC: 1
S651JR-7: RNCC: 5 | RNVC: 1
MIL-C-85052/3: RNCC: 5 | RNVC: 9
10117631: RNCC: 6 | RNVC: 9

1 Nov 1980

5340-01-657-6973
Detent Plunger

016576973
1700080: RNCC: 3 | RNVC: 9
1700080: RNCC: 5 | RNVC: 2
5340PL2093800: RNCC: 6 | RNVC: 9
1700080-R: RNCC: C | RNVC: 1

25 Aug 2016

5340-01-657-6962
Detent Plunger

016576962
2400031: RNCC: 3 | RNVC: 9
2400031: RNCC: 5 | RNVC: 2
2400031-R: RNCC: 5 | RNVC: 2
2400031: RNCC: 5 | RNVC: 9
5340PL2093791: RNCC: 6 | RNVC: 9
2400031-R: RNCC: C | RNVC: 1

25 Aug 2016

5340-01-674-2825
Loop Clamp

016742825
NAS1715: RNCC: 3 | RNVC: 1
NAS1715D6NW: RNCC: 3 | RNVC: 2

19 Jul 2018

5340-01-657-6964
Mechanical Stop

016576964
2400026: RNCC: 3 | RNVC: 9
2400026: RNCC: 5 | RNVC: 2
2400026-R: RNCC: 5 | RNVC: 2
5340PL2093797: RNCC: 6 | RNVC: 9
2400026-R: RNCC: C | RNVC: 1

25 Aug 2016

5340-01-665-9638
Mounting Bracket

016659638
A14567-3: RNCC: 3 | RNVC: 2
136-00-0001: RNCC: 5 | RNVC: 2
136-00-0001: RNCC: 5 | RNVC: 9
A14567-2: RNCC: 5 | RNVC: 9

18 Aug 2017

5340-01-508-6583
Loop Clamp

015086583
3G4218: RNCC: 3 | RNVC: 2
3G-4218: RNCC: 5 | RNVC: 2

29 May 2003

5340-00-526-3899
Spring Tension Clip

005263899
100-200-4: RNCC: 3 | RNVC: 1
575R411H05: RNCC: 3 | RNVC: 2
575R411H05: RNCC: 3 | RNVC: 2
100-200-4-0: RNCC: 3 | RNVC: 2
139-0745-000: RNCC: 3 | RNVC: 2
639492-015: RNCC: 3 | RNVC: 2
691-20-5215: RNCC: 3 | RNVC: 2
639492-015: RNCC: 5 | RNVC: 2
108453-4: RNCC: 5 | RNVC: 2
343MR004P008: RNCC: 5 | RNVC: 2

1 Jan 1963

5340-01-607-2498
Butt Hinge Leaf

016072498
MS20001CYA3-2500: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1

6 Jun 2012

5340-01-211-3600
Electrical-Mechanical Equipment Post

012113600
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4B22: RNCC: 3 | RNVC: 2

26 Jun 1985

5340-01-607-6348
Retaining Strap

016076348
NAS1677: RNCC: 3 | RNVC: 1
NAS1677C14W35N: RNCC: 3 | RNVC: 2

9 Jun 2012

5340-01-700-0055
Dust And Moisture Seal Protective Cap

017000055
953532-8: RNCC: 3 | RNVC: 2
953532-8: RNCC: 5 | RNVC: 2

11 Mar 2022

5340-00-521-5720
Spring Loaded Cylinder Fastener

005215720
16UKS290: RNCC: 3 | RNVC: 2
5215720: RNCC: 5 | RNVC: 2
2590005215720: RNCC: 5 | RNVC: 9
423309: RNCC: 5 | RNVC: 9
5340005215720: RNCC: 6 | RNVC: 9
2590005215720: RNCC: 6 | RNVC: 9

1 Jan 1961

5340-01-706-4797
Rod End Connector

017064797
3-60897-2: RNCC: 3 | RNVC: 2
3-60897: RNCC: D | RNVC: 9

29 Nov 2022

5340-01-222-2435
Electrical-Mechanical Equipment Post

012222435
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A3B09: RNCC: 3 | RNVC: 2
13692: RNCC: E | RNVC: 8
553-6541-002: RNCC: E | RNVC: 8

9 Dec 1985

5340-01-218-8222
Electrical-Mechanical Equipment Post

012188222
NAS1831: RNCC: 3 | RNVC: 1
NAS1831B4C20: RNCC: 3 | RNVC: 2
8224-B-0632-3: RNCC: E | RNVC: 8

19 Oct 1985

5340-01-065-2805
Retaining Strap

010652805
NAS1711: RNCC: 3 | RNVC: 1
NAS1711D11-27N: RNCC: 3 | RNVC: 2

13 Sep 1978

5340-01-663-6082
Loop Clamp

016636082
NAS1715: RNCC: 3 | RNVC: 1
NAS1715CT4SH: RNCC: 3 | RNVC: 2

16 May 2017

5340-01-663-3240
Retaining Strap

016633240
NAS1711: RNCC: 3 | RNVC: 1
NAS1711D26-145S: RNCC: 3 | RNVC: 2

5 May 2017

5340-01-710-6843
Cushioning Pad

017106843
12242-2019-05: RNCC: 3 | RNVC: 2
12242-2019: RNCC: D | RNVC: 9

15 Jun 2023

5340-01-710-6415
Mounting Plate

017106415
12645794: RNCC: 3 | RNVC: 2
12645794: RNCC: C | RNVC: 1

13 Jun 2023

5340-01-710-6349
Mounting Bracket

017106349
12416453: RNCC: 3 | RNVC: 2
12416453: RNCC: C | RNVC: 1

12 Jun 2023

5340-01-710-6203
Mounting Bracket

017106203
X0606-00398-120: RNCC: 3 | RNVC: 2
X0606-00398: RNCC: D | RNVC: 9

12 Jun 2023

5340-01-710-5806
Dust And Moisture Seal Protective Cap

017105806
5-77-3602: RNCC: 1 | RNVC: 2
DETECTIVE-X-ACC-RESERVE-PORT-DUS: RNCC: 3 | RNVC: 2

8 Jun 2023

5340-01-710-3408
Mounting Bracket

017103408
901-075-899-131: RNCC: 3 | RNVC: 2

25 May 2023

5340-01-709-5041
Mounting Bracket

017095041
12641815: RNCC: 3 | RNVC: 2
12641815: RNCC: 5 | RNVC: 1

19 May 2023

5340-01-709-2315
Mounting Plate

017092315
B003310M05069-0057: RNCC: 3 | RNVC: 2
B003310M05069-0057: RNCC: 5 | RNVC: 2
B003310M05069: RNCC: D | RNVC: 9

18 May 2023

5340-01-709-1972
Access Cover

017091972
12646081: RNCC: 3 | RNVC: 2
12646081: RNCC: 5 | RNVC: 2

16 May 2023

5340-01-709-1497
Mounting Bracket

017091497
12644537-001: RNCC: 3 | RNVC: 2
12644537-001: RNCC: 5 | RNVC: 2

13 May 2023

5340-01-710-4793
Cushioning Pad

017104793
13081156: RNCC: 3 | RNVC: 2

1 Jun 2023

5340-01-709-1651
Spring Tension Clip

017091651
18-0022-1: RNCC: 3 | RNVC: 2
7-4584-1: RNCC: 5 | RNVC: 2
18-0022: RNCC: D | RNVC: 9

15 May 2023

5340-01-710-6096
Mounting Bracket

017106096
12246-1125-01: RNCC: 3 | RNVC: 2
12246-1125: RNCC: D | RNVC: 9

10 Jun 2023

5340-01-541-5846
Clamp

015415846
BACC10FY083SE: RNCC: 3 | RNVC: 2
BACC10FY083SE: RNCC: 3 | RNVC: 2
BACC10FY083SE: RNCC: 3 | RNVC: 2
BACC10FY083SE: RNCC: 3 | RNVC: 2
BACC10FY083S: RNCC: 5 | RNVC: 9
BACC10FY083S: RNCC: 5 | RNVC: 9
BACC10FY083S: RNCC: 5 | RNVC: 9
BACC10FY08S: RNCC: 5 | RNVC: 9
BACC10FY083S: RNCC: 5 | RNVC: 9

30 Jun 2006

5340-00-619-3188
Loop Clamp

006193188
AN742H40: RNCC: 2 | RNVC: 2
MIL-C-8603: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-01-537-5445
Dust And Moisture Seal Boot

015375445
33381-2: RNCC: 3 | RNVC: 2
33381-2: RNCC: 3 | RNVC: 2
33381 / REV C: RNCC: D | RNVC: 9

13 Feb 2006

5340-01-036-6903
Loop Clamp

010366903
NAS1397: RNCC: 3 | RNVC: 1
NAS1397R3EN: RNCC: 3 | RNVC: 2
NAS1397R3N: RNCC: 5 | RNVC: 9

5 Mar 1977

5340-01-671-1224
Butt Hinge

016711224
MS20001C8-2450: RNCC: 2 | RNVC: 2
MS20001: RNCC: 4 | RNVC: 1
MS20001P: RNCC: 5 | RNVC: 9

15 Mar 2018

5340-01-019-2978
Mortise Lock Set

010192978
BHMA-A156.2: RNCC: 3 | RNVC: 1
BHMA-A156.2 F80 GRADE 1: RNCC: 3 | RNVC: 2
ANSI A156.2 FUNCTION F80 GRADE 1: RNCC: 5 | RNVC: 9

14 Apr 1976

5340-01-705-8723
Access Cover

017058723
R902153544: RNCC: 3 | RNVC: 2
5803122252: RNCC: 5 | RNVC: 2

18 Oct 2022

5340-01-708-1551
Vent Plug

017081551
5JEZ1: RNCC: 3 | RNVC: 2

17 Mar 2023

5340-01-702-4570
Block Clamp

017024570
272W9101-148: RNCC: 3 | RNVC: 2

7 Jul 2022

5340-01-626-9414
Doorstop

016269414
WEDGE-IT/BLACK: RNCC: 3 | RNVC: 2
WEDCP: RNCC: 5 | RNVC: 2

26 Mar 2014

5340-01-703-2374
Block Clamp

017032374
65B80254-232: RNCC: 3 | RNVC: 2

24 Aug 2022

5340-01-671-6230
Loop Clamp

016716230
NAS1715: RNCC: 3 | RNVC: 1
NAS1715C7SWH: RNCC: 3 | RNVC: 2
NAS1715C7SWH: RNCC: 3 | RNVC: 2
NAS1715C7SWH: RNCC: 5 | RNVC: 9

4 Apr 2018

5340-01-610-0825
Turnbuckle

016100825
14005252: RNCC: 3 | RNVC: 2
172-70274-02: RNCC: 3 | RNVC: 9
172-70274-02: RNCC: 5 | RNVC: 9

9 Aug 2012

5340-01-698-5271
Mounting Plate

016985271
4347302: RNCC: 3 | RNVC: 2

22 Nov 2021

5340-01-243-1056
Electrical-Mechanical Equipment Post

012431056
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C5C48: RNCC: 3 | RNVC: 2

22 Oct 1986

5340-01-701-7622
Rod End Clevis

017017622
19009A0630: RNCC: 3 | RNVC: 2

7 Jun 2022

5340-01-700-9211
Loop Clamp

017009211
202544: RNCC: 3 | RNVC: 2

20 Apr 2022

5340-00-069-2803
Spring Tension Clip

000692803
NASM24066/3: RNCC: 3 | RNVC: 1
M24066/3-103: RNCC: 3 | RNVC: 2
MILC24066: RNCC: 5 | RNVC: 9
MS28136-3: RNCC: 5 | RNVC: 9
946455-503: RNCC: 5 | RNVC: 9
M24066/3-103: RNCC: 5 | RNVC: 9
946455-503: RNCC: C | RNVC: 1

1 Jan 1963

5340-00-069-4960
Aviation Rod End Connector

000694960
MS21255-3RL: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1

1 Jan 1960

5340-00-068-1822
Rod End Clevis

000681822
MS21253-3LL: RNCC: 2 | RNVC: 2
MIL-DTL-8878: RNCC: 4 | RNVC: 1
MS21253-3LL: RNCC: 5 | RNVC: 1

1 Jan 1963

5340-01-248-9657
Electrical-Mechanical Equipment Post

012489657
NAS1830: RNCC: 3 | RNVC: 1
NAS1830A13B03: RNCC: 3 | RNVC: 2
9532B-A-0440-17: RNCC: C | RNVC: 1

3 Feb 1987

5340-01-393-0414
Spacing Threaded Standoff

013930414
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A6E10: RNCC: 3 | RNVC: 2
8575-A-1032-1B: RNCC: C | RNVC: 1

27 Mar 1984

5340-01-629-3859
Mounting Bracket

016293859
RAM-B-202U: RNCC: 3 | RNVC: 2
M1380-878010: RNCC: 6 | RNVC: 9

27 Jun 2014

5340-01-293-8806
Access Cover

012938806
11580126: RNCC: 3 | RNVC: 2
777.17.001: RNCC: 5 | RNVC: 2
E1211254: RNCC: 5 | RNVC: 2

8 Feb 1989

5340-01-193-7415
Electrical-Mechanical Equipment Post

011937415
NAS1831: RNCC: 3 | RNVC: 1
NAS1831C4C40: RNCC: 3 | RNVC: 2

7 Nov 1984

5340-00-915-2342
Loop Clamp

009152342
MS25281F6: RNCC: 2 | RNVC: 2
SAE-AS25281: RNCC: 3 | RNVC: 1
MS25281-F6: RNCC: 3 | RNVC: 2
MS25281-F6: RNCC: 5 | RNVC: 1
23053-007: RNCC: 5 | RNVC: 1
A06815: RNCC: 5 | RNVC: 2
23053-7: RNCC: 5 | RNVC: 9
5340009152342: RNCC: 5 | RNVC: 9
10117499: RNCC: 6 | RNVC: 9
433-6404394FIND: RNCC: C | RNVC: 1

13 Jul 1966

5340-01-466-9029
Dust And Moisture Seal Protective Cap-Plug

014669029
CEC-14: RNCC: 3 | RNVC: 2
CEC-14: RNCC: 3 | RNVC: 2
A1250177: RNCC: 5 | RNVC: 2
189228094: RNCC: 5 | RNVC: 2
91852855: RNCC: 5 | RNVC: 2
5M2345-R14: RNCC: 5 | RNVC: 2
5M2435-R14: RNCC: 5 | RNVC: 2
CEC-R14: RNCC: 5 | RNVC: 2
P4330556-7: RNCC: 5 | RNVC: 2
191809518: RNCC: 5 | RNVC: 2

5 Aug 1999

5340-00-899-2612
Manual Control Handle

008992612
NAS1637: RNCC: 3 | RNVC: 1
NAS1637-3B: RNCC: 3 | RNVC: 2
61L2-2-1AA: RNCC: 5 | RNVC: 2
61L2-2-1AA: RNCC: 5 | RNVC: 2
13550087-001: RNCC: 7 | RNVC: 2
8596949-001: RNCC: 7 | RNVC: 9

3 Feb 1967

5340-01-644-6806
Manual Control Lever

016446806
0111202: RNCC: 3 | RNVC: 2
0203537: RNCC: 3 | RNVC: 9

15 May 2015

5340-01-376-2837
Electrical-Mechanical Equipment Post

013762837
NAS1829: RNCC: 3 | RNVC: 1
NAS1829B3C04: RNCC: 3 | RNVC: 2

29 May 1993

5340-01-705-9248
Mounting Plate

017059248
930-31562-2: RNCC: 3 | RNVC: 2

21 Oct 2022

5340-01-706-6806
Spacing Threaded Standoff

017066806
4640-1032-SS-20: RNCC: 3 | RNVC: 2
4640-1032-SS: RNCC: 5 | RNVC: 9

13 Dec 2022

5340-01-697-8227
Block Clamp

016978227
312T3106-302: RNCC: 3 | RNVC: 2

13 Oct 2021

5340-01-705-6749
Loop Clamp

017056749
BACC10HP07-3: RNCC: 3 | RNVC: 2

4 Oct 2022

5340-01-702-4961
Block Clamp

017024961
65B80254-200: RNCC: 3 | RNVC: 2

11 Jul 2022

5340-01-698-0868
Clamping Catch

016980868
4F70065-151A: RNCC: 3 | RNVC: 2
4F70065: RNCC: D | RNVC: 9

28 Oct 2021

5340-01-282-9977
Electrical-Mechanical Equipment Post

012829977
NAS1831: RNCC: 3 | RNVC: 1
NAS1831A4C17: RNCC: 3 | RNVC: 2

27 Jul 1988

5340-01-336-4249
Spring Tension Clip

013364249
NAS1464: RNCC: 3 | RNVC: 1
NAS1464B042-08C: RNCC: 3 | RNVC: 2

26 Mar 1991

5340-01-285-4753
Spring Tension Clip

012854753
NASM24066/4: RNCC: 3 | RNVC: 1
M24066/4-105: RNCC: 3 | RNVC: 2
MIL-C-24066/4: RNCC: 5 | RNVC: 9
M24066/4-105: RNCC: 5 | RNVC: 9

14 Sep 1988

5340-01-338-3391
Bow Handle

013383391
NASM39087: RNCC: 3 | RNVC: 1
MS39087-312CP: RNCC: 3 | RNVC: 2
MS39087-312CP: RNCC: 5 | RNVC: 9

2 May 1991

5340-01-366-2691
Electrical-Mechanical Equipment Post

013662691
NAS1830: RNCC: 3 | RNVC: 1
NAS1830C14B06: RNCC: 3 | RNVC: 2

23 Oct 1992

5340-01-364-6549
Spring Tension Clip

013646549
8T1896: RNCC: 3 | RNVC: 2
8T-1896: RNCC: 5 | RNVC: 2

23 Sep 1992

5340-01-508-2960
Loop Clamp

015082960
86637996: RNCC: 3 | RNVC: 2
R24840: RNCC: 5 | RNVC: 9

16 May 2003

5340-01-507-1257
Mounting Bracket

015071257
H73918-02-5: RNCC: 3 | RNVC: 2
US73918-02 H73918-02-5: RNCC: 3 | RNVC: 2
H73918-02-9: RNCC: 3 | RNVC: 2
H73918-02-5: RNCC: 5 | RNVC: 9
US73918-02 H73918-02-5: RNCC: 5 | RNVC: 9

21 Apr 2003

5340-01-698-9440
Seal Retaining Plate

016989440
3030237-001: RNCC: 3 | RNVC: 2

22 Dec 2021

5340-01-701-7285
Mounting Bracket

017017285
4494643: RNCC: 3 | RNVC: 2

3 Jun 2022

5340-01-700-7806
Mounting Plate

017007806
C63621-001: RNCC: 3 | RNVC: 2
C63854-001 REV0 ITEM 2: RNCC: C | RNVC: 1

13 Apr 2022

5340-01-700-8486
Rigid Connecting Link

017008486
1700141168: RNCC: 3 | RNVC: 2

16 Apr 2022

5340-01-700-8270
Mending Plate

017008270
CL-250-PA-L: RNCC: 3 | RNVC: 2

15 Apr 2022

5340-01-700-7652
Liquid Holding Unit Filler Neck

017007652
06361-08801: RNCC: 1 | RNVC: 2
06361-08801-102: RNCC: 3 | RNVC: 2

13 Apr 2022

5340-01-700-7872
Utility Resilient Mount

017007872
K650-M1051: RNCC: 3 | RNVC: 2

13 Apr 2022

5340-01-700-8510
Electronic Equipment Hardware Kit

017008510
1810-300-250: RNCC: 3 | RNVC: 2

16 Apr 2022

5340-01-700-7173
Threaded Rod End

017007173
8599965-001: RNCC: 3 | RNVC: 2
8599965: RNCC: D | RNVC: 9

11 Apr 2022

5340-01-700-6729
Thumb Latch

017006729
2011442-1: RNCC: 3 | RNVC: 2

6 Apr 2022

5340-01-700-6635
Blank Panel

017006635
TEC-R11-ENCL-BP: RNCC: 3 | RNVC: 2

6 Apr 2022

5340-01-701-6563
Handle Grip

017016563
8827645: RNCC: 3 | RNVC: 2

28 May 2022

5340-01-701-3834
Retaining Harness

017013834
5-19-15411: RNCC: 3 | RNVC: 2

13 May 2022

5340-01-699-5493
Retaining Band

016995493
B4991: RNCC: 3 | RNVC: 2
A1077A-0514: RNCC: D | RNVC: 9

8 Feb 2022

5340-01-701-0809
Snap Hook

017010809
60225-1: RNCC: 3 | RNVC: 2

26 Apr 2022

5340-01-700-3025
Mounting Bracket

017003025
98080: RNCC: 3 | RNVC: 2

23 Mar 2022

5340-01-701-6340
Mounting Plate

017016340
11B5091873: RNCC: 3 | RNVC: 2

27 May 2022

5340-01-701-3837
Retaining Strap

017013837
5-19-15442: RNCC: 3 | RNVC: 2

13 May 2022

5340-01-701-7112
Access Cover

017017112
8756892: RNCC: 3 | RNVC: 2
8756892: RNCC: 5 | RNVC: 2

2 Jun 2022

5340-01-699-4374
Mounting Bracket

016994374
8708704: RNCC: 3 | RNVC: 2

31 Jan 2022

5340-01-700-3923
Double Angle Bracket

017003923
8246005-50: RNCC: 3 | RNVC: 2
8246005-50/FIND SHEET 2: RNCC: 5 | RNVC: 1
8246005: RNCC: D | RNVC: 9

25 Mar 2022

5340-01-700-4280
Mounting Bracket

017004280
09010B1410-0: RNCC: 3 | RNVC: 2

29 Mar 2022

5340-01-701-2125
Access Cover

017012125
506010048: RNCC: 3 | RNVC: 2

4 May 2022

5340-01-701-3435
Rigid Connecting Link

017013435
167-7569488 / PC NO 95: RNCC: 3 | RNVC: 2
SP002107 / PC NO 61: RNCC: 5 | RNVC: 1
7569488 / PC NO 95: RNCC: C | RNVC: 1

11 May 2022

5340-01-700-7373
Electronic Equipment Hardware Kit

017007373
1810-300-260: RNCC: 3 | RNVC: 2

11 Apr 2022

5340-01-700-3349
Access Cover

017003349
12680082: RNCC: 3 | RNVC: 2

23 Mar 2022

5340-01-699-5102
Loop Clamp

016995102
COL0409Z1: RNCC: 1 | RNVC: 2
COL0409Z1: RNCC: 3 | RNVC: 9

4 Feb 2022

5340-01-700-0888
Access Cover

017000888
4370113: RNCC: 3 | RNVC: 2

16 Mar 2022

5340-01-700-3601
Spacing Threaded Standoff

017003601
4500-440SSMODL600: RNCC: 3 | RNVC: 2

24 Mar 2022

5340-01-702-4237
Door Closer

017024237
70217-01024-110: RNCC: 3 | RNVC: 2
70217-01024: RNCC: D | RNVC: 9

6 Jul 2022

5340-01-699-7544
Mounting Plate

016997544
12680036: RNCC: 3 | RNVC: 2

23 Feb 2022

5340-01-702-9882
Expansion Plug

017029882
556-8548101 ITEM NO 5: RNCC: 3 | RNVC: 2
556-8548101: RNCC: D | RNVC: 9

10 Aug 2022

5340-01-702-8953
Mounting Plate

017028953
8668727-001: RNCC: 3 | RNVC: 2
8668727: RNCC: D | RNVC: 9

4 Aug 2022

5340-01-699-2066
Mechanical Stop

016992066
3029405-001: RNCC: 3 | RNVC: 2

15 Jan 2022

5340-01-699-0970
Butt Hinge Leaf

016990970
4F19325-108A: RNCC: 3 | RNVC: 2
4F19325: RNCC: D | RNVC: 9

7 Jan 2022

5340-01-702-8518
Dust And Moisture Seal Protective Cap

017028518
898-110-082: RNCC: 3 | RNVC: 2
90042479: RNCC: 5 | RNVC: 2

2 Aug 2022

5340-01-701-9576
Cover Retainer

017019576
60134-103: RNCC: 3 | RNVC: 2

17 Jun 2022

5340-01-699-5084
Webbing Strap

016995084
CM-06: RNCC: 3 | RNVC: 2

4 Feb 2022

5340-01-702-3622
Utility Resilient Mount

017023622
Q8-018177-R30: RNCC: 3 | RNVC: 2
500-0-468-146-103: RNCC: 7 | RNVC: 2
500-0-468-146: RNCC: D | RNVC: 9

30 Jun 2022

5340-01-702-3941
Mounting Bracket

017023941
12610710: RNCC: 3 | RNVC: 2
12610710: RNCC: 5 | RNVC: 2

1 Jul 2022

5340-01-701-8683
Helical Compression Spring Seat

017018683
2903270-0309: RNCC: 3 | RNVC: 2
02446-0353 REV- NO.537: RNCC: 5 | RNVC: 9
02446-0353: RNCC: D | RNVC: 9

14 Jun 2022

5340-01-702-5254
Access Cover

017025254
8-842005-01: RNCC: 3 | RNVC: 2

13 Jul 2022

5340-01-703-0124
Access Cover

017030124
M5937AT: RNCC: 3 | RNVC: 2

11 Aug 2022

5340-01-702-3243
Self-Locking Insert

017023243
743636: RNCC: 3 | RNVC: 2

28 Jun 2022

5340-01-699-7842
Double Angle Bracket

016997842
12680046: RNCC: 3 | RNVC: 2

25 Feb 2022

5340-01-702-8514
Spacing Threaded Standoff

017028514
A-3808-256-24: RNCC: 3 | RNVC: 2

2 Aug 2022

5340-01-702-9244
Manual Control Lever

017029244
0021-2004: RNCC: 3 | RNVC: 2

8 Aug 2022

5340-01-702-5091
Mounting Bracket

017025091
12600691: RNCC: 3 | RNVC: 2
12600691: RNCC: 5 | RNVC: 2

12 Jul 2022

5340-01-702-8890
Bow Handle

017028890
NR665-1: RNCC: 3 | RNVC: 2

4 Aug 2022

5340-01-701-7870
Access Cover

017017870
8669419-010: RNCC: 3 | RNVC: 2
8669419/FIND NO.1: RNCC: 5 | RNVC: 9
8669419: RNCC: D | RNVC: 9

8 Jun 2022

5340-01-701-7974
Mounting Bracket

017017974
180506: RNCC: 3 | RNVC: 2

8 Jun 2022

5340-01-699-7542
Angle Bracket

016997542
4099AS6030-1: RNCC: 3 | RNVC: 2

23 Feb 2022

5340-01-701-8129
Loop Clamp

017018129
NAS1715C4TH: RNCC: 3 | RNVC: 2

9 Jun 2022

5340-01-703-0485
Mounting Bracket

017030485
12649207: RNCC: 3 | RNVC: 2

15 Aug 2022

5340-01-701-9833
Mounting Bracket

017019833
12618174: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-701-9818
Mounting Bracket

017019818
12639312: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-699-6094
Mounting Bracket

016996094
965577: RNCC: 3 | RNVC: 2

11 Feb 2022

5340-01-701-9705
Mounting Bracket

017019705
RTTZM11M-FEN-SUPPORT-G: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-2500
Block Clamp

017022500
270T0005-223: RNCC: 3 | RNVC: 2

23 Jun 2022

5340-01-699-0791
Strapping

016990791
N-12-010-BK: RNCC: 3 | RNVC: 2

6 Jan 2022

5340-01-699-7707
Access Cover

016997707
400/D9598: RNCC: 3 | RNVC: 2

24 Feb 2022

5340-01-699-0975
Butt Hinge Leaf

016990975
4F19325-103A: RNCC: 3 | RNVC: 2
4F19325: RNCC: D | RNVC: 9

7 Jan 2022

5340-01-699-1120
Access Cover

016991120
373580-105: RNCC: 3 | RNVC: 2

8 Jan 2022

5340-01-699-0859
Strapping

016990859
113-8753280ITEM9: RNCC: 3 | RNVC: 1

6 Jan 2022

5340-01-699-6712
Access Cover

016996712
5HK01670-109: RNCC: 3 | RNVC: 2

17 Feb 2022

5340-01-702-3710
Mounting Bracket

017023710
12610589: RNCC: 3 | RNVC: 2

30 Jun 2022

5340-01-699-7425
Spring Tension Clip

016997425
H016249: RNCC: 3 | RNVC: 2
5-13-10951-1: RNCC: 5 | RNVC: 2
5-13-10951: RNCC: 7 | RNVC: 2

23 Feb 2022

5340-01-701-9738
Access Cover

017019738
12617752: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-701-8491
Piston Liner Kit

017018491
S65-489: RNCC: 3 | RNVC: 2

13 Jun 2022

5340-01-699-0721
Butt Hinge Leaf

016990721
4F19324-103A: RNCC: 3 | RNVC: 2
4F19324: RNCC: D | RNVC: 9

6 Jan 2022

5340-01-699-8720
Mounting Bracket

016998720
D 1 28 0010: RNCC: 3 | RNVC: 2

3 Mar 2022

5340-01-702-2661
Utility Access Door

017022661
73730403-2: RNCC: 3 | RNVC: 2
73730403-2: RNCC: 5 | RNVC: 2

24 Jun 2022

5340-01-699-8381
Mounting Bracket

016998381
4099AS1081-1: RNCC: 3 | RNVC: 2

1 Mar 2022

5340-01-698-9969
Dust And Moisture Seal Protective Cover

016989969
660-023MT25S5-24: RNCC: 2 | RNVC: 2

29 Dec 2021

5340-01-699-8634
Rim Latch

016998634
425975-1: RNCC: 3 | RNVC: 2
425975: RNCC: D | RNVC: 9

3 Mar 2022

5340-01-699-6472
Multiple Angle Bracket

016996472
4370631: RNCC: 3 | RNVC: 2

15 Feb 2022

5340-01-699-6683
Rigid Connecting Link

016996683
123BM97128-1: RNCC: 3 | RNVC: 2

17 Feb 2022

5340-01-702-8919
Mounting Bracket

017028919
8668725-001: RNCC: 3 | RNVC: 2
8668725: RNCC: D | RNVC: 9

4 Aug 2022

5340-01-698-9894
Loop Clamp

016989894
ST9M630H35: RNCC: 1 | RNVC: 2
JM44LC33WH35: RNCC: 3 | RNVC: 2

28 Dec 2021

5340-01-699-7051
Mounting Plate

016997051
400/H1414: RNCC: 3 | RNVC: 2

18 Feb 2022

5340-01-699-8002
Mounting Bracket

016998002
1700142392: RNCC: 3 | RNVC: 2

25 Feb 2022

5340-01-701-9082
Access Cover

017019082
180468: RNCC: 3 | RNVC: 2

15 Jun 2022

5340-01-699-5996
Mounting Plate

016995996
8287459: RNCC: 3 | RNVC: 2
8287449 / P25: RNCC: D | RNVC: 9

11 Feb 2022

5340-01-702-3470
Block Clamp

017023470
270T0004-118: RNCC: 3 | RNVC: 2

29 Jun 2022

5340-01-702-3444
Mounting Bracket

017023444
12610587: RNCC: 3 | RNVC: 2
12610587: RNCC: 5 | RNVC: 2

29 Jun 2022

5340-01-701-9796
Angle Bracket

017019796
12596675: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-701-8502
Mounting Bracket

017018502
AV2090216: RNCC: 3 | RNVC: 2
AV2090216 CDRL / REV -: RNCC: D | RNVC: 9

13 Jun 2022

5340-01-699-1302
Access Cover

016991302
8289086: RNCC: 3 | RNVC: 2

11 Jan 2022

5340-01-699-1762
Mounting Bracket

016991762
ALH-215150-001: RNCC: 3 | RNVC: 2

13 Jan 2022

5340-01-699-8519
Access Cover

016998519
401/I0017: RNCC: 3 | RNVC: 2

2 Mar 2022

5340-01-701-4441
Quick Release Plunger

017014441
SSL190-503: RNCC: 3 | RNVC: 2

17 May 2022

5340-01-699-3208
Manual Control Handle

016993208
8599189-03-001: RNCC: 3 | RNVC: 2
8599189-03: RNCC: D | RNVC: 9

24 Jan 2022

5340-01-702-0108
Mounting Bracket

017020108
12594787: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0033
Angle Bracket

017020033
12594751: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-701-0001
Rigid Connecting Link

017010001
416T2232-5: RNCC: 3 | RNVC: 1

21 Apr 2022

5340-01-701-9981
Angle Bracket

017019981
12618176: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-700-4860
Butt Hinge Leaf

017004860
74A151829-2002: RNCC: 3 | RNVC: 2

30 Mar 2022

5340-01-701-0061
Pad Eye

017010061
66038-1: RNCC: 3 | RNVC: 2

21 Apr 2022

5340-01-701-9935
Mounting Bracket

017019935
12596659: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0017
Angle Bracket

017020017
12593931: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-5423
Access Cover

017025423
L3053602-015: RNCC: 3 | RNVC: 2

13 Jul 2022

5340-01-701-3633
Rigid Connecting Link

017013633
167-7569488 / PC NO 65: RNCC: 3 | RNVC: 2
SP002107 / PC NO 55: RNCC: 5 | RNVC: 1
7569488 / PC N0 65: RNCC: C | RNVC: 1

12 May 2022

5340-01-699-9286
Retaining Strap

016999286
9M368D26: RNCC: 1 | RNVC: 2
751-26-8: RNCC: 3 | RNVC: 2
JM44SC13D26: RNCC: 3 | RNVC: 2
TA12C53D26: RNCC: 3 | RNVC: 2

7 Mar 2022

5340-01-699-8494
Aft Brush Box

016998494
BPK-4: RNCC: 3 | RNVC: 2
3108864069ITEMA2: RNCC: 5 | RNVC: 2

2 Mar 2022

5340-00-188-0338
Turnbuckle

001880338
FFT791-TY1-FM1-CL7-3/4X6: RNCC: 2 | RNVC: 2
FF-T-791: RNCC: 4 | RNVC: 1

1 Jan 1963

5340-01-706-7694
Retaining Strap

017067694
7082343: RNCC: 3 | RNVC: 2

16 Dec 2022

5340-01-706-6837
Spacing Threaded Standoff

017066837
61313-1: RNCC: 3 | RNVC: 2

13 Dec 2022

5340-01-706-6312
Retaining Strap

017066312
3362013-15: RNCC: 3 | RNVC: 2
3362013: RNCC: D | RNVC: 9

9 Dec 2022

5340-01-706-6272
Utility Resilient Mount

017066272
1337135: RNCC: 3 | RNVC: 2

8 Dec 2022

5340-01-702-6468
Mounting Bracket

017026468
8245609-1: RNCC: 3 | RNVC: 2
8245609: RNCC: D | RNVC: 9

19 Jul 2022

5340-01-701-0180
Door Holder

017010180
505-0-9-640-003: RNCC: 3 | RNVC: 2
505-0-9-640: RNCC: D | RNVC: 9

22 Apr 2022

5340-01-702-6456
Mounting Bracket

017026456
8253292-1: RNCC: 3 | RNVC: 2
8250292-1: RNCC: 5 | RNVC: 2
8253292: RNCC: D | RNVC: 9

19 Jul 2022

5340-01-702-0414
Mounting Bracket

017020414
12594795: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-701-0243
Snap-In Plain Standoff

017010243
77C734951G11: RNCC: 3 | RNVC: 2
77C7349451/GROUP 11: RNCC: D | RNVC: 9

22 Apr 2022

5340-01-702-0512
Angle Bracket

017020512
12617552: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-702-0494
Dust And Moisture Seal Protective Cap

017020494
667-235ZR-U6-16: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-700-0052
Manual Control Lever

017000052
02014800: RNCC: 3 | RNVC: 2

11 Mar 2022

5340-01-702-0562
Mounting Plate

017020562
12617844: RNCC: 3 | RNVC: 2

21 Jun 2022

5340-01-700-5435
Mounting Bracket

017005435
212A4660-3: RNCC: 3 | RNVC: 2

1 Apr 2022

5340-01-706-8788
Bow Handle

017068788
520912-1: RNCC: 3 | RNVC: 2
520912: RNCC: D | RNVC: 9

28 Dec 2022

5340-01-706-3983
Manual Control Handle

017063983
61298-00034-1: RNCC: 3 | RNVC: 2
61298-00034: RNCC: D | RNVC: 9

21 Nov 2022

5340-01-706-3825
Mounting Bracket

017063825
1026098-329: RNCC: 3 | RNVC: 2

19 Nov 2022

5340-01-706-3817
Sealing Plug Assembly

017063817
3076290: RNCC: 3 | RNVC: 2

19 Nov 2022

5340-01-706-3785
Bumper

017063785
140645: RNCC: 3 | RNVC: 2

19 Nov 2022

5340-01-706-3609
Loop Clamp

017063609
NAS1714: RNCC: 3 | RNVC: 1
NAS1714D2-7N: RNCC: 3 | RNVC: 2

18 Nov 2022

5340-01-701-5420
Mounting Bracket

017015420
31849-01: RNCC: 3 | RNVC: 2

23 May 2022

Load More Results