Premium Information is available for this item - Upgrade for $1 a day
5340-01-629-4227
Double Angle Bracket
5340016294227 016294227 06A8172011
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING. View more Double Angle Bracket
May 2023
1
Marketplace 5340-01-629-4227
Request a Quotation from participating marketplace vendors
Related Documents 5340-01-629-4227 1+ Documents (More...)
BUY NE FedMall Updated Every Day 5340-01-629-4227 RQST NE Updated Every Day 5340-01-629-4227 RQST
Updated Every Day 5340-01-629-4227 RQST NE Related Documents 5340-01-629-4227 1+ Documents ( More...
Restrictions 5340-01-629-4227
5340-01-629-4227 is a Double Angle Bracket that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
End Users 5340-01-629-4227
- US Army (A919)
- Effective Date:
- 1 Jun 2014
- Supplementary Receivers:
- BF
Approved Sources 5340-01-629-4227
- Part Number
- Manufacturer
- Status
- 06A8172011
- Manufacturer
- 5B5M3 - Devcom Chemical Biological Center (Active)
- Primary Buy
- Primary Buy
Datasheet 5340-01-629-4227
- Characteristic
- Specifications
- FIIG
- Specifications
- A042A0
- Center Section Height [AHPZ]
- 1.830 Inches Nominal
- Center Section Thickness [AHQB]
- 0.130 Inches Nominal
- Center Section Width [AHQA]
- 1.100 Inches Nominal
- First Leg Angle [CSSQ]
- 90.0 Degrees Nominal
- First Leg Corner Radius [AHQP]
- 0.130 Inches Nominal
- First Leg Distance From Edge To Hole Center Along Width [AHRA]
- 3.000 Inches Nominal
- First Leg Hole Arrangement Style [AKAU]
- One Hole
- First Leg Hole Diameter [AHLK]
- 0.500 Inches Nominal
- First Leg Distance From Edge To Hole Center Along Length [AHRB]
- 0.310 Inches Nominal
- First Leg Style [AJZU]
- Corner Radius
- First Leg Thickness [AHPW]
- 0.130 Inches Nominal
- First Leg Width [AHQN]
- 3.630 Inches Nominal
- First Leg Length [ADLK]
- 1.100 Inches Nominal
- End Item Identification [AGAV]
- 4910-01-539-6129
- Material [MATT]
- Aluminum Alloy 6061
- Mounting Hole Type [ACHY]
- Plain
- Part Name Assigned By Controlling Agency [CXCY]
- Carriage Mounting Bracket
- Material Document And Classification [MDCL]
- Astm B221 Assn Std Single Material Response
- Second Leg Angle [CSSR]
- 90.0 Degrees Nominal
- Second Leg Corner Radius [AHLG]
- 0.130 Inches Nominal
- Second Leg Distance From Edge To Hole Center Along Width [AHLV]
- 0.630 Inches Nominal
- Second Leg Hole Arrangement Style [AKCU]
- One Hole
- Second Leg Distance From Edge To Hole Center Along Length [AHLW]
- 0.310 Inches Nominal
- Second Leg Relationship To First Leg [CSSP]
- Not Identical
- Second Leg Style [AKBU]
- Corner Radius
- Second Leg Thickness [AHPX]
- 0.130 Inches Nominal
- Second Leg Hole Diameter [AHLN]
- 0.500 Inches Nominal
- Second Leg Length [ADLL]
- 1.100 Inches Nominal
- Second Leg Width [AHLF]
- 3.630 Inches Nominal
- Special Features [FEAT]
- Two 0.250 Inch (N0m) Holes Centered In Middle Section (Between Each Leg) Each 1.310 Inch (Nom) From Each Side Of Item
- Style Designator [STYL]
- Adjacent Angles
DLA Procurement Analysis 5340-01-629-4227
Management Data 5340-01-629-4227
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 5340-01-629-4227
Freight Information 5340-01-629-4227
5340-01-629-4227 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093600. A Sub NMFC of X. It has a NMFC Description of BRACKETS/BUSHINGS/JOINTS/MOUNTS ETC. 5340-01-629-4227 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49780 which rates the freight between FCL and LCL. 5340-01-629-4227 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5340-01-629-4227 is not classified as a special type of cargo when transported by water. 5340-01-629-4227 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5340-01-629-4227 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: