Premium Information is available for this item - Upgrade for $1 a day
5340-01-615-4361
Double Angle Bracket
5340016154361 016154361 10004K0506
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING. View more Double Angle Bracket
November 2023
1
Marketplace 5340-01-615-4361
Request a Quotation from participating marketplace vendors
Related Documents 5340-01-615-4361 1+ Documents (More...)
(Identification) 1/3 NSN 5340-01-615-4361 (Identification) 2/3 NSN 5340-01-615-4361 (Identification
BUY NE FedMall Updated Every Day 5340-01-615-4361 RQST NE Updated Every Day 5340-01-615-4361 RQST
Restrictions 5340-01-615-4361
5340-01-615-4361 is a Double Angle Bracket that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
End Users 5340-01-615-4361
- US Marine Corps (MC47)
- Effective Date:
- 1 Jan 2013
Approved Sources 5340-01-615-4361
- Part Number
- Manufacturer
- Status
- 10004K0506
- Manufacturer
- 01365 - Marine Corps Systems Command (Active)
- Primary Buy
- Primary Buy
Datasheet 5340-01-615-4361
- Characteristic
- Specifications
- FIIG
- Specifications
- A042A0
- Material [MATT]
- Aluminum Alloy 5052
- Style Designator [STYL]
- Double Angle
- First Leg Length [ADLK]
- 1.75 Inches Nominal
- Second Leg Length [ADLL]
- 1.11 Inches Nominal
- First Leg Thickness [AHPW]
- 0.125 Inches Nominal
- Second Leg Thickness [AHPX]
- 0.125 Inches Nominal
- Center Section Height [AHPZ]
- 1.27 Inches Nominal
- Center Section Width [AHQA]
- 2.17 Inches Nominal
- Center Section Thickness [AHQB]
- 0.125 Inches Nominal
- First Leg Angle [CSSQ]
- 60.0 Degrees Nominal
- Second Leg Angle [CSSR]
- 60.0 Degrees Nominal
- First Leg Style [AJZU]
- Chamfered Ends
- First Leg Width [AHQN]
- 1.50 Inches Nominal
- First Leg End Width [AHQQ]
- 1.32 Inches Nominal
- Second Leg Width [AHLF]
- 2.17 Inches Nominal
- Second Leg End Width [AHLH]
- 1.99 Inches Nominal
- First Leg Chamfer Angle [CWPD]
- 45.0 Degrees Nominal
- Second Leg Chamfer Angle [CWPG]
- 45.0 Degrees Nominal
- First Leg Hole Arrangement Style [AKAU]
- One Hole
- First Leg Hole Diameter [AHLK]
- 0.375 Inches Nominal
- First Leg Distance From Edge To Hole Center Along Width [AHRA]
- 0.633 Inches Nominal
- First Leg Distance From Edge To Hole Center Along Length [AHRB]
- 0.845 Inches Nominal
- Second Leg Hole Diameter [AHLN]
- 0.578 Inches Nominal
- Second Leg Distance From Edge To Hole Center Along Width [AHLV]
- 1.666 Inches Nominal
- Second Leg Distance From Edge To Hole Center Along Length [AHLW]
- 0.587 Inches Nominal
- Second Leg Relationship To First Leg [CSSP]
- Not Identical
- Second Leg Style [AKBU]
- Chamfered Ends
- Second Leg Hole Arrangement Style [AKCU]
- One Hole
- Special Features [FEAT]
- One Side Of Both Center Section And 2Nd Leg Are Bent Down At 90%. The Measurements Above Fit The Flat Pattern. After The Bend, Both Of These Sections Will Be 1.75 Inch Wide.
- End Item Identification [AGAV]
- 2430-01-581-8572
Weapon Systems (WSDC) 5340-01-615-4361
DLA Procurement Analysis 5340-01-615-4361
- Last Stock Position:
- 2 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5340-01-615-4361
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
Similar Supply Items to 5340-01-615-4361
Freight Information 5340-01-615-4361
5340-01-615-4361 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093600. A Sub NMFC of X. It has a NMFC Description of BRACKETS/BUSHINGS/JOINTS/MOUNTS ETC. 5340-01-615-4361 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49780 which rates the freight between FCL and LCL. 5340-01-615-4361 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5340-01-615-4361 is not classified as a special type of cargo when transported by water. 5340-01-615-4361 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5340-01-615-4361
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5340-01-615-4361 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- R
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: