Premium Information is available for this item - Upgrade for $1 a day
5340-01-614-6193
Spacing Threaded Standoff
5340016146193 016146193 NAS1831 NAS1831AC4C40
A standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance. View more Spacing Threaded Standoff
November 2023
3
Marketplace 5340-01-614-6193
Request a Quotation from participating marketplace vendors
Related Documents 5340-01-614-6193 5+ Documents (More...)
BUY NE FedMall Updated Every Day 5340-01-614-6193 RQST NE Updated Every Day 5340-01-614-6193 RQST
Updated Every Day 5340-01-614-6193 RQST NE Related Documents 5340-01-614-6193 5+ Documents ( More...
NAS1831-6E09 NAS1831-6E9 A standoff that must have a threaded end(s) or be internally threaded its full
NAS1831 STANDOFF,THREADED,SPACING RQST NS Request Quotation FedMall Updated Every 15 Minutes 5340-01-
NAS1831 STANDOFF,THREADED,SPACING RQST NS Request Quotation Subscribe to View Vendor Details...
NAS1831-6E09 NAS1831-6E9 A standoff that must have a threaded end(s) or be internally threaded its full
NAS1831 STANDOFF,THREADED,SPACING RQST NS Request Quotation Subscribe to View Vendor Details... 5340-
NAS1831-6E09 NAS1831-6E9 A standoff that must have a threaded end(s) or be internally threaded its full
NAS1831 STANDOFF,THREADED,SPACING RQST NS Request Quotation FedMall Updated Every 15 Minutes 5340-01-
NAS1831-6E09 NAS1831-6E9 A standoff that must have a threaded end(s) or be internally threaded its full
Restrictions 5340-01-614-6193
5340-01-614-6193 is a Spacing Threaded Standoff that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
End Users 5340-01-614-6193
- US Air Force (FXGI)
- Effective Date:
- 1 Dec 2012
Approved Sources 5340-01-614-6193
- Part Number
- Manufacturer
- Status
- NAS1831
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Incomplete Reference
- Incomplete Reference
- NAS1831AC4C40
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
Datasheet 5340-01-614-6193
- Characteristic
- Specifications
- FIIG
- Specifications
- A08900
- End Item Identification [AGAV]
- Kc-135 Blk 45
- Cross-Sectional Shape [ANLR]
- Hexagon
- Material [MATT]
- Aluminum Alloy 6061 Overall
- Nominal Thread Size [CQJX]
- 0.1380 Inches Left Internal (Includes Thru Thread)
- Nominal Thread Size [CQJX]
- 0.1380 Inches Right Internal
- Length [ABRY]
- 2.495 Inches Minimum And 2.505 Inches Maximum
- Part Name Assigned By Controlling Agency [CXCY]
- Post, Electrical-Mechanical Equipment
- Thread Series Designator [THSD]
- Unc Left Internal (Includes Thru Thread)
- Thread Series Designator [THSD]
- Unc Right Internal
- Thread Quantity Per Inch [CMLP]
- 32 Left Internal (Includes Thru Thread)
- Thread Quantity Per Inch [CMLP]
- 32 Right Internal
- Width Across Flats [ASDB]
- 0.244 Inches Minimum And 0.256 Inches Maximum
- Style Designator [STYL]
- Left Internal And Right Internal Threads
- Thread Class [AAJD]
- 2B Left Internal (Includes Thru Thread)
- Thread Class [AAJD]
- 2B Right Internal
- Thread Direction [AAJF]
- Right-Hand Left Internal (Includes Thru Thread)
- Thread Direction [AAJF]
- Right-Hand Right Internal
- Thread Length [AASA]
- 0.250 Inches Minimum Left Internal (Includes Thru Thread)
- Thread Length [AASA]
- 0.250 Inches Minimum Right Internal
DLA Procurement Analysis 5340-01-614-6193
Management Data 5340-01-614-6193
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5340-01-614-6193
Freight Information 5340-01-614-6193
5340-01-614-6193 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5340-01-614-6193 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5340-01-614-6193 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5340-01-614-6193 is not classified as a special type of cargo when transported by water. 5340-01-614-6193 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5340-01-614-6193 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: