Premium Information is available for this item - Upgrade for $1 a day
5340-01-442-2804
Butt Hinge
5340014422804 014422804 MIL-H-9850 MS35822-13D
A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side. View more Butt Hinge
November 2023
1

Marketplace 5340-01-442-2804
Request a Quotation from participating marketplace vendors
Related Documents 5340-01-442-2804 5+ Documents (More...)
BUY NE FedMall Updated Every Day 5340-01-442-2804 RQST NE Updated Every Day 5340-01-442-2804 RQST
Updated Every Day 5340-01-442-2804 RQST NE Related Documents 5340-01-442-2804 5+ Documents ( More...
Straight Rod5340013435606 013435606 MIL-H-9850 https//www.nsnlookup.com /fsg-53/fsc-5340/us 5340-01-
379-7793 Butt Hinge 5340013797793013797793 ,MIL-H-9850 Upgrade for $1 a day Upgrade your Account Upgrade
https//www.nsnlookup.com /fsg-53/fsc-5340/us 5340-01-442-2804 Butt Hinge 5340014422804 014422804
,MIL-H-9850 Upgrade for $1 a day Upgrade your Account Upgrade 5340-01-442-2804Butt Hinge5340014422804
https//www.nsnlookup.com /fsg-53/ https//www.nsnlookup.com /fsg-53/fsc-5340/us 5340-01-442-2804
Butt Hinge 5340014422804 014422804,MIL-H-9850 https//www.nsnlookup.com /fsg-53/fsc-5340/us 5340-01-072
https//www.nsnlookup.com /fsg-53/fsc-5340/us 5340-01-379-7793 Butt Hinge 5340013797793 013797793,MIL-H-9850
Butt Hinge 5340014422804 014422804,MIL-H-9850 Headless Straight Rod 5340013435606013435606 a day
Restrictions 5340-01-442-2804
5340-01-442-2804 is a Butt Hinge that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
End Users 5340-01-442-2804
- US Air Force (FXGI)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5340-01-442-2804
- Part Number
- Manufacturer
- Status
- MS35822-13D
- Manufacturer
- 96906 - Military Standards (Active)
- Definitive Standard
- Definitive Standard
- MIL-H-9850
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
Datasheet 5340-01-442-2804
- Characteristic
- Specifications
- FIIG
- Specifications
- A25100
- Material Thickness [ABPX]
- 0.040 Inches Nominal
- Knuckle Quantity [AKEX]
- 146
- Knuckle Type [AKNB]
- Friction
- Material And Location [ANNQ]
- Steel, Qq-S-698 Body
- Pin Removability [AKES]
- Nonremovable
- Reversible Feature [AJNC]
- Not Included
- Overall Length [ABHP]
- 72.000 Inches Nominal
- Performance Type [AGLD]
- Not Rated
- Pin Diameter [ABVV]
- 0.091 Inches Nominal
- Pin Center To Body Edge Distance [AKFK]
- 0.500 Inches Minimum And 0.562 Inches Maximum
- Style Designator [STYL]
- Butt
DLA Procurement Analysis 5340-01-442-2804
Management Data 5340-01-442-2804
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5340-01-442-2804


















Freight Information 5340-01-442-2804
5340-01-442-2804 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095300. A Sub NMFC of Z. It has a NMFC Description of HINGES/BUTTS NOI I/S. 5340-01-442-2804 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49860 which rates the freight between FCL and LCL. 5340-01-442-2804 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5340-01-442-2804 is not classified as a special type of cargo when transported by water. 5340-01-442-2804 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5340-01-442-2804 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: