Premium Information is available for this item - Upgrade for $1 a day
5340-01-397-0835
Spacing Threaded Standoff
5340013970835 013970835 NAS1830 NAS1830BT14B09
A standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance. View more Spacing Threaded Standoff
November 2023
4
Marketplace 5340-01-397-0835
Request a Quotation from participating marketplace vendors
Related Documents 5340-01-397-0835 5+ Documents (More...)
BUY NE FedMall Updated Every Day 5340-01-397-0835 RQST NE Updated Every Day 5340-01-397-0835 RQST
Updated Every Day 5340-01-397-0835 RQST NE Related Documents 5340-01-397-0835 5+ Documents ( More...
Spacing Threaded Standoff 5340013970835 day Upgrade your Account Upgrade 5340-01-397-0835Spacing
Threaded Standoff5340013970835 013970835 NAS1830 NAS1830-03C06 A standoff that must have a threaded
Spacing Threaded Standoff 5340013970835 day Upgrade your Account Upgrade 5340-01-397-0835Spacing
Threaded Standoff5340013970835 013970835 NAS1830 NAS1830-03C06 A standoff that must have a threaded
NAS1830-11B05 A standoff that must have a threaded end(s) or be internally threaded its full length.
NAS1830-02B05 A standoff that must have a threaded end(s) or be internally threaded its full length.
NAS1830-11B05 A standoff that must have a threaded end(s) or be internally threaded its full length.
NAS1830-02B05 A standoff that must have a threaded end(s) or be internally threaded its full length.
Restrictions 5340-01-397-0835
5340-01-397-0835 is a Spacing Threaded Standoff that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
End Users 5340-01-397-0835
- US Air Force (FXGI)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5340-01-397-0835
- Part Number
- Manufacturer
- Status
- NAS1830
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Incomplete Reference
- Incomplete Reference
- NAS1830BT14B09
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
Datasheet 5340-01-397-0835
- Characteristic
- Specifications
- FIIG
- Specifications
- A08900
- Cross-Sectional Shape [ANLR]
- Round
- Diameter [ABMZ]
- 0.662 Inches Minimum And 0.672 Inches Maximum
- Material [MATT]
- Copper Alloy Standoff
- Nominal Thread Size [CQJX]
- 0.1120 Inches Right Internal
- Length [ABRY]
- 0.557 Inches Minimum And 0.567 Inches Maximum
- Right Projection Diameter [CXXW]
- 0.188 Inches Maximum
- Right Projection Length [CXXX]
- 0.147 Inches Minimum And 0.150 Inches Maximum
- Thread Series Designator [THSD]
- Un Right Internal
- Style Designator [STYL]
- Projection One End
- Thread Direction [AAJF]
- Right-Hand Right Internal
- Thread Length [AASA]
- 0.1120 Inches Minimum Right Internal And 0.1140 Inches Maximum Right Internal
DLA Procurement Analysis 5340-01-397-0835
Management Data 5340-01-397-0835
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5340-01-397-0835
Freight Information 5340-01-397-0835
5340-01-397-0835 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5340-01-397-0835 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5340-01-397-0835 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5340-01-397-0835 is not classified as a special type of cargo when transported by water. 5340-01-397-0835 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5340-01-397-0835 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: