Premium Information is available for this item - Upgrade for $1 a day
5340-01-383-6084
Handwheel
5340013836084 013836084 MIL-H-9859 22302-SPECIAL 22302-X015 MS21312-4
An item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL. View more Handwheel
November 2023
2
Marketplace 5340-01-383-6084
Request a Quotation from participating marketplace vendors
Related Documents 5340-01-383-6084 4+ Documents (More...)
BUY NE FedMall Updated Every Day 5340-01-383-6084 RQST NE Updated Every Day 5340-01-383-6084 RQST
Updated Every Day 5340-01-383-6084 RQST NE Related Documents 5340-01-383-6084 4+ Documents ( More...
5340-01-383-6084Handwheel5340013836084 013836084 MIL-H-9859 Handwheel 5340014491038014491038,MIL-H-9859
Handwheel 5340013836084013836084,MIL-H-9859 Upgrade Handwheel 5340001389797001389797,MIL-H-9859 Upgrade
https//www.nsnlookup.com /fsg-53/fsc-5340/us 5340-00-445-5306 Handwheel 5340004455306004455306,MIL-H-9859
Handwheel 5340001389797001389797,MIL-H-9859 Upgrade for $1 a day Upgrade your Account Upgrade 5340
https//www.nsnlookup.com /fsg-53/fsc-5340/us 5340-00-138-9797 Handwheel 5340001389797001389797,MIL-H-9859
https//www.nsnlookup.com /fsg-53/fsc-5340/us 5340-01-449-1038 Handwheel 5340014491038 014491038,MIL-H-9859
Restrictions 5340-01-383-6084
5340-01-383-6084 is a Handwheel that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5340-01-383-6084
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5340-01-383-6084
- US Air Force (FXGI)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5340-01-383-6084
- Part Number
- Manufacturer
- Status
- 013836084
- Manufacturer
- 16236 - Dla Land And Maritime (Active)
- Primary Buy
- Primary Buy
- MIL-H-9859
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
- 22302-SPECIAL
- 94882 - Jergens Inc (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 22302-X015
- 94882 - Jergens Inc (Active)
- Secondary Buy
- Secondary Buy
- MS21312-4
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5340-01-383-6084
- Characteristic
- Specifications
- FIIG
- Specifications
- A25300
- Drive Facility Style [AWJY]
- Single Keyway
- Handle Counterbalancing Weight [AWKE]
- Not Included
- Handle Rotating Feature [AWKD]
- Included
- Handwheel Style [AWJX]
- Spokes
- Hub Outside Diameter [ALNC]
- 1.720 Inches Minimum And 1.780 Inches Maximum
- Hub Length [AJLJ]
- 1.484 Inches Minimum And 1.516 Inches Maximum
- Inside Diameter [AARX]
- 0.625 Inches Minimum And 0.627 Inches Maximum
- Keyway Width [ABRR]
- 0.1260 Inches Minimum And 0.1280 Inches Maximum
- Keyway Depth [ABRV]
- 0.0685 Inches Minimum And 0.0735 Inches Maximum
- Material And Location [ANNQ]
- Aluminum Alloy, Qq-A-225/6, Alloy 2024, T4 Handle
- Ratchet [AWKF]
- Not Included
- Outside Diameter [ABKV]
- 7.940 Inches Minimum And 8.060 Inches Maximum
- Overall Height [ABKW]
- 1.546 Inches Minimum And 1.578 Inches Maximum
- Spoke Angle In Deg [AWKK]
- 45.0
- Spoke Quantity [AWKJ]
- 6
- Surface Treatment And Location [ANNR]
- Anodized, Mil-A-8625, Type 2 Handle
Weapon Systems (WSDC) 5340-01-383-6084
DLA Procurement Analysis 5340-01-383-6084
- Last Stock Position:
- 1 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5340-01-383-6084
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5340-01-383-6084
Freight Information 5340-01-383-6084
5340-01-383-6084 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 197583. A Sub NMFC of Z. It has a NMFC Description of WHEELS NOT SUITBLE FOR TIRES. 5340-01-383-6084 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 96710 which rates the freight between FCL and LCL. 5340-01-383-6084 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5340-01-383-6084 is not classified as a special type of cargo when transported by water. 5340-01-383-6084 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5340-01-383-6084
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5340-01-383-6084 2 Records
Contracting Technical Data File (CTDF) 5340-01-383-6084 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: