Premium Information is available for this item - Upgrade for $1 a day
5340-01-361-3569
Double Angle Bracket
5340013613569 013613569 704AS3643 893643-1
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING. View more Double Angle Bracket
May 2023
3
Marketplace 5340-01-361-3569
Request a Quotation from participating marketplace vendors
Related Documents 5340-01-361-3569 2+ Documents (More...)
(Identification) 1/5 NSN 5340-01-361-3569 (Identification) 2/5 NSN 5340-01-361-3569 (Identification
) 3/5 NSN 5340-01-361-3569 (Identification) 4/5 NSN 5340-01-361-3569 (Identification) 5/5 - - - - - 1
Double Angle Bracket 5340013613569 013613569 Upgrade your Account Upgrade 5340-01-361-3569Double
Angle Bracket5340013613569 013613569 704AS3643 893643 NumberManufacturerStatus704AS3643 30003 - Naval
Restrictions 5340-01-361-3569
5340-01-361-3569 is a Double Angle Bracket that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
End Users 5340-01-361-3569
- US Navy (N9BZ)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- HD
Approved Sources 5340-01-361-3569
- Part Number
- Manufacturer
- Status
- 704AS3643
- Manufacturer
- 30003 - Naval Air Systems Command Managed (Active)
- Primary Buy
- Primary Buy
- 893643-1
- 96214 - Raytheon Company (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5340-01-361-3569
- Characteristic
- Specifications
- FIIG
- Specifications
- A042A0
- Center Section Height [AHPZ]
- 0.662 Inches Nominal
- Center Section Thickness [AHQB]
- 0.058 Inches Minimum And 0.068 Inches Maximum
- Center Section Width [AHQA]
- 0.300 Inches Nominal
- First Leg Angle [CSSQ]
- 90.0 Degrees Nominal
- First Leg Chamfer Angle [CWPD]
- 40.0 Degrees Minimum And 50.0 Degrees Maximum
- First Leg Distance From Edge To Hole Center Along Width [AHRA]
- 0.150 Inches Nominal
- First Leg End Width [AHQQ]
- 0.120 Inches Nominal
- First Leg Hole Arrangement Style [AKAU]
- One Hole
- First Leg Hole Diameter [AHLK]
- 0.125 Inches Minimum And 0.127 Inches Maximum
- First Leg Distance From Edge To Hole Center Along Length [AHRB]
- 0.150 Inches Nominal
- First Leg Style [AJZU]
- Chamfered Ends
- First Leg Thickness [AHPW]
- 0.058 Inches Minimum And 0.068 Inches Maximum
- First Leg Width [AHQN]
- 0.300 Inches Nominal
- First Leg Length [ADLK]
- 0.447 Inches Nominal
- Material Document And Classification [MDCL]
- Qq-S-766 Cond A Fed Spec Single Material Response
- Material [MATT]
- Steel Comp 304
- Mounting Hole Type [ACHY]
- Plain
- Second Leg Angle [CSSR]
- 77.0 Degrees Nominal
- Second Leg Distance Between First And Second Hole Centers Along Width [AHLT]
- 0.350 Inches Nominal
- Second Leg Distance Between Hole Centers Along Length [AHLS]
- 0.120 Nominal Inches
- Second Leg Hole Arrangement Style [AKCU]
- Three Holes
- Second Leg Length [ADLL]
- 0.650 Inches Nominal
- Second Leg Distance Between Lower Hole Centers Along Width [AHLR]
- 0.700 Inches Nominal
- Second Leg Distance From Edge To Hole Center Along Length [AHLW]
- 0.250 Inches Nominal
- Second Leg Distance From Edge To Hole Center Along Width [AHLV]
- 0.250 Inches Nominal
- Second Leg Width [AHLF]
- 1.200 Inches Nominal
- Second Leg Relationship To First Leg [CSSP]
- Not Identical
- Second Leg Style [AKBU]
- Square
- Second Leg Thickness [AHPX]
- 0.058 Inches Minimum And 0.068 Inches Maximum
- Style Designator [STYL]
- Adjacent Angles
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Ty 1,2,3,Or 6 Fed Spec Single Treatment Response
- Surface Treatment [SFTT]
- Passivate
DLA Procurement Analysis 5340-01-361-3569
Management Data 5340-01-361-3569
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5340-01-361-3569
Freight Information 5340-01-361-3569
5340-01-361-3569 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093600. A Sub NMFC of X. It has a NMFC Description of BRACKETS/BUSHINGS/JOINTS/MOUNTS ETC. 5340-01-361-3569 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49780 which rates the freight between FCL and LCL. 5340-01-361-3569 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5340-01-361-3569 is not classified as a special type of cargo when transported by water. 5340-01-361-3569 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5340-01-361-3569
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5340-01-361-3569 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: