Premium Information is available for this item - Upgrade for $1 a day
5340-01-355-8248
Section Block Clamp
5340013558248 013558248 12948170
A single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE. View more Section Block Clamp
November 2023
3
Marketplace 5340-01-355-8248
Request a Quotation from participating marketplace vendors
Related Documents 5340-01-355-8248 1+ Documents (More...)
BUY NE FedMall Updated Every Day 5340-01-355-8248 RQST NE Updated Every Day 5340-01-355-8248 RQST
Updated Every Day 5340-01-355-8248 RQST NE Related Documents 5340-01-355-8248 1+ Documents ( More...
Restrictions 5340-01-355-8248
5340-01-355-8248 is a Section Block Clamp that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
End Users 5340-01-355-8248
- US Army (A919)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- A187
- Supplementary Receivers:
- BF
Approved Sources 5340-01-355-8248
- Part Number
- Manufacturer
- Status
- 12948170
- Manufacturer
- 19200 - Combat Capabilities Development (Active)
- Primary Buy
- Primary Buy
Datasheet 5340-01-355-8248
- Characteristic
- Specifications
- FIIG
- Specifications
- A105A0
- Distance From Center Of Mounting Hole To Edge Along The Width [AFEC]
- 0.560 Inches Nominal
- Distance From End To First Clamping Hole Center [CWXN]
- 0.500 Inches Nominal
- Distance From End To First Mounting Hole Center [CWXC]
- 1.000 Inches Nominal
- Block Height [BYGG]
- 0.590 Inches Minimum And 0.650 Inches Maximum
- Center To Center Distance Between First And Fifth Clamping Holes [CWYM]
- 3.970 Inches Minimum And 4.030 Inches Maximum
- Center To Center Distance Between First And Fourth Clamping Holes [CWYH]
- 2.970 Inches Minimum And 3.030 Inches Maximum
- Center To Center Distance Between First And Second Clamping Holes [CWXZ]
- 0.970 Inches Minimum And 1.030 Inches Maximum
- Center To Center Distance Between First And Second Mounting Holes [AXPC]
- 3.000 Inches Nominal
- Center To Center Distance Between First And Third Clamping Holes [CWYC]
- 1.970 Inches Minimum And 2.030 Inches Maximum
- Clamping Hole Diameter [CWWM]
- 0.280 Inches Nominal First Hole0.400 Inches Nominal Second Hole
- Clamping Hole Quantity [CWTD]
- 5
- Material Document And Classification [MDCL]
- Mil-R-3065,-3Bc70a14b24e034f17 Mil Spec Single Material Response Or Ams 3209 Assn Std Single Material Response
- Mounting Facility [AZGM]
- Unthreaded Hole
- Mounting Hole Diameter [ABTB]
- 0.350 Inches Minimum And 0.410 Inches Maximum
- Mounting Hole Quantity [ABTJ]
- 2
- Overall Length [ABHP]
- 4.820 Inches Minimum And 4.940 Inches Maximum
- Overall Width [ABMK]
- 1.060 Inches Minimum And 1.180 Inches Maximum
- Style Designator [STYL]
- Rectangular
Weapon Systems (WSDC) 5340-01-355-8248
DLA Procurement Analysis 5340-01-355-8248
- Last Stock Position:
- 154 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5340-01-355-8248
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
NATO Stock Numbers Related to 5340-01-355-8248
Freight Information 5340-01-355-8248
5340-01-355-8248 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5340-01-355-8248 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5340-01-355-8248 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5340-01-355-8248 is not classified as a special type of cargo when transported by water. 5340-01-355-8248 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5340-01-355-8248
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Special requirement – See specific instructions or drawings provided
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5340-01-355-8248 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: