Premium Information is available for this item - Upgrade for $1 a day
5340-01-351-5355
Corner Brace
5340013515355 013515355 184C7416G0001 184C7416G1
An item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE. View more Corner Brace
May 2023
5
Marketplace 5340-01-351-5355
Request a Quotation from participating marketplace vendors
Restrictions 5340-01-351-5355
5340-01-351-5355 is a Corner Brace that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5340-01-351-5355
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5340-01-351-5355
- US Air Force (FXGI)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5340-01-351-5355
- Part Number
- Manufacturer
- Status
- 184C7416G0001
- Manufacturer
- 99971 - Lockheed Martin Corp Naval (Active)
- Original Design
- Original Design
- 184C7416G1
- 99971 - Lockheed Martin Corp Naval (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5340-01-351-5355
- Characteristic
- Specifications
- FIIG
- Specifications
- A042A0
- Angle [CRMK]
- 90.0 Degrees Nominal
- First Leg Hole Arrangement Style [AKAU]
- Four Holes
- First Leg Distance From Edge To Hole Center Along Length [AHRB]
- 0.118 Inches Nominal
- First Leg Width [AHQN]
- 0.262 Inches Nominal
- First Leg Length [ADLK]
- 0.627 Inches Nominal
- Hole Quantity [ASXK]
- 5
- Material Document And Classification [MDCL]
- Qq-A-250/11,T6 Fed Spec Single Material Response
- Material Thickness [ABPX]
- 0.037 Inches Minimum And 0.041 Inches Maximum
- Material [MATT]
- Aluminum Alloy 6061
- Mounting Hole Type [ACHY]
- Counterbored And Countersunk And Plain
- Reinforcement Method [AFPW]
- Raised Center Second Leg
- Second Leg Hole Arrangement Style [AKCU]
- One Hole
- Second Leg Hole Diameter [AHLN]
- 0.104 Inches Nominal
- Second Leg Length [ADLL]
- 0.945 Inches Nominal
- Second Leg Distance From Edge To Hole Center Along Length [AHLW]
- 0.170 Inches Nominal
- Second Leg Distance From Edge To Hole Center Along Width [AHLV]
- 0.160 Inches Nominal
- Second Leg Width [AHLF]
- 0.262 Inches Nominal
- Second Leg Relationship To First Leg [CSSP]
- Not Identical
- Style Designator [STYL]
- Angle
- Surface Treatment Document And Classification [STDC]
- Mil-C-26074,Cl 1 Mil Spec Single Treatment Response
- Surface Treatment [SFTT]
- Nickel
DLA Procurement Analysis 5340-01-351-5355
Management Data 5340-01-351-5355
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5340-01-351-5355
Freight Information 5340-01-351-5355
5340-01-351-5355 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of J. It has a NMFC Description of HARDWARE, NOI SUB 9. 5340-01-351-5355 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5340-01-351-5355 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5340-01-351-5355 is not classified as a special type of cargo when transported by water. 5340-01-351-5355 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5340-01-351-5355 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: