Premium Information is available for this item - Upgrade for $1 a day
5340-01-351-2855
Spacing Threaded Standoff
5340013512855 013512855 NAS1831 NAS1831A4C05 948515-605
A standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance. View more Spacing Threaded Standoff
November 2023
10
Marketplace 5340-01-351-2855
Request a Quotation from participating marketplace vendors
Related Documents 5340-01-351-2855 5+ Documents (More...)
NAS1831A4C05 STANDOFF,THREADED,SPACING 400 EA NS Request Quotation FedMall Updated Every 15 Minutes 5340
-01-351-2855 BUY NE FedMall Updated Every Day 5340-01-351-2855 RQST NE Updated Every Day 5340-01-351-
NAS1831-6E09 NAS1831-6E9 A standoff that must have a threaded end(s) or be internally threaded its full
NAS1831 STANDOFF,THREADED,SPACING RQST NS Request Quotation FedMall Updated Every 15 Minutes 5340-01-
NAS1831 STANDOFF,THREADED,SPACING RQST NS Request Quotation Subscribe to View Vendor Details...
NAS1831-6E09 NAS1831-6E9 A standoff that must have a threaded end(s) or be internally threaded its full
NAS1831 STANDOFF,THREADED,SPACING RQST NS Request Quotation Subscribe to View Vendor Details... 5340-
NAS1831-6E09 NAS1831-6E9 A standoff that must have a threaded end(s) or be internally threaded its full
NAS1831 STANDOFF,THREADED,SPACING RQST NS Request Quotation FedMall Updated Every 15 Minutes 5340-01-
NAS1831-6E09 NAS1831-6E9 A standoff that must have a threaded end(s) or be internally threaded its full
Restrictions 5340-01-351-2855
5340-01-351-2855 is a Spacing Threaded Standoff that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5340-01-351-2855
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5340-01-351-2855
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5340-01-351-2855
- Part Number
- Manufacturer
- Status
- NAS1831
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Incomplete Reference
- Incomplete Reference
- NAS1831A4C05
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- 948515-605
- 06481 - Northrop Grumman Systems Corporation (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5340-01-351-2855
- Characteristic
- Specifications
- FIIG
- Specifications
- A08900
- Bearing Surface Type [CRTM]
- Flat
- Material Document And Classification [MDCL]
- Qq-A-225/8,T6 Fed Spec 1St Material Response Overall Or Qq-A-225/6,T4 Fed Spec 2Nd Material Response Overall Or Qq-A-25/3,T4 Fed Spec 3Rd Material Response Overall
- Material [MATT]
- Aluminum Alloy 6061 Overall Or Aluminum Alloy 2024 Overall Or Aluminum Alloy 2011 Overall
- Nominal Thread Size [CQJX]
- 0.138 Inches
- Nut Height [ADEA]
- 0.308 Inches Minimum And 0.318 Inches Maximum
- Nut Style [ACTA]
- Hexagon
- Thread Series [BZRR]
- Unc
- Width Across Flats [ASDB]
- 0.244 Inches Minimum And 0.256 Inches Maximum
- Specification/Standard Data [ZZZK]
- 80205-Nas1831 Professional/Industrial Association Standard
- Surface Treatment Document And Classification [STDC]
- Mil-A-8625,Type 1 Or Type 2,Class 1 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Anodize Overall
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 2B
- Thread Quantity Per Inch [CMLP]
- 32
Weapon Systems (WSDC) 5340-01-351-2855
DLA Procurement Analysis 5340-01-351-2855
Management Data 5340-01-351-2855
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5340-01-351-2855
Freight Information 5340-01-351-2855
5340-01-351-2855 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5340-01-351-2855 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5340-01-351-2855 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5340-01-351-2855 is not classified as a special type of cargo when transported by water. 5340-01-351-2855 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5340-01-351-2855 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- P
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: