5340-01-346-8899

Electrical-Mechanical Equipment Post

5340013468899 013468899 159799-001

A standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance. View more Spacing Threaded Standoff

5340-01-346-8899 POST,ELECTRICAL-MECHANICAL EQUIPMENT 5340013468899 013468899

Managed by United States
NSN Created on 11 Oct 1991
Data Last Changed
November 2023
NATO Update Count
5
NATO Data Quality
5340-01-346-8899 POST,ELECTRICAL-MECHANICAL EQUIPMENT 5340013468899 013468899 1/1
NSN 5340-01-346-8899 (Generic Image) 1/1

5340-01-346-8899 Stock and Availability Marketplace 5340-01-346-8899

Need Help?
Request a Quotation from participating marketplace vendors
eBay Updated Every Day
5340-01-346-8899 RQST NE eBay
eBay Updated Every Day
5340-01-346-8899 RQST eBay
Amazon Updated Every Day
5340-01-346-8899 RQST NE Amazon

5340-01-346-8899 Related Documents Related Documents 5340-01-346-8899 2+ Documents (More...)

3040-00-984-7815 3040009847815 009847815 is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to support rotating members see axle(1), shouldered. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1), straight; and axle(1), straight.
5895-01-147-6124 Signal Data Converter Group 119440-19RNCC: 3 | RNVC: 3 | DAC: 2 18 Feb 1983 5340-01-346-8899

5340-01-346-8899 Demil Restrictions 5340-01-346-8899

DEMIL: A | DEMILI: | CRITICALITY: X | HMIC: P | PMIC: A | EDC: | ADPEC:

5340-01-346-8899 is a Electrical-Mechanical Equipment Post that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.

5340-01-346-8899 Manufacturers Approved Sources 5340-01-346-8899

5340-01-346-8899 Related Items NATO Stock Numbers Related to 5340-01-346-8899