5340-01-336-8025

5310-14-500-2533 5310145002533 145002533 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5307-37-500-2533 5307375002533 375002533 is a headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. all or part of the unthreaded section has a cross-sectional diameter greater than the nominal stud size plus 0.020 inches (0.508 mm). it may be thread relieved. see also stud, locked in.

5315-01-500-2533 5315015002533 015002533 is a headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. it may have welding projections. it also may contain holes drilled perpendicular to axial centerline. excludes pin, eccentric.

8415-21-500-2533 8415215002533 215002533 is a coat of treated and/or coated material. it may be lined and/or have a removable liner. it is designed to protect the wearer from water and flame and may be designed to afford maximum protection to personnel working in the proximity of high temperature fires. excludes cover, fireman's coat, heat protective.

1440-99-500-2533 1440995002533 995002533 MOUNT,TRIPOD,GUIDED