Premium Information is available for this item - Upgrade for $1 a day
5340-01-333-5764
Access Door Hinge
5340013335764 013335764 DAA3383F090-003
A one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE. View more Access Door Hinge
May 2023
5
Marketplace 5340-01-333-5764
Request a Quotation from participating marketplace vendors
Related Documents 5340-01-333-5764 1+ Documents (More...)
Access Door Hinge 5340013335764 013335764 5340-01-333-5764 5340013335764 013335764 is a one piece
Restrictions 5340-01-333-5764
5340-01-333-5764 is a Access Door Hinge that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
End Users 5340-01-333-5764
- US Air Force (FXGI)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5340-01-333-5764
- Part Number
- Manufacturer
- Status
- DAA3383F090-003
- Manufacturer
- 81205 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
Datasheet 5340-01-333-5764
- Characteristic
- Specifications
- FIIG
- Specifications
- A25100
- Center To Center Distance Between Mounting Holes Along Length [ADFY]
- 2.425 Inches Nominal
- Hinge Mounting Type [AKER]
- Half Surface
- Hinge Pin [AKEW]
- Not Included
- Material Thickness [ABPX]
- 0.064 Inches Minimum And 0.076 Inches Maximum
- Mounting Hole Diameter [ABTB]
- 0.161 Inches Minimum And 0.172 Inches Maximum
- Mounting Hole Quantity [ABTJ]
- 5
- Knuckle Inside Diameter [AKFS]
- 0.183 Inches Minimum And 0.188 Inches Maximum
- Knuckle Length [AKFH]
- 0.505 Inches Nominal
- Knuckle Type [AKNB]
- Friction
- Knuckle Quantity [AKEX]
- 8
- Material And Location [ANNQ]
- Aluminum Alloy, Qq-A-200/11, T73511 Body
- Pin Tip Style [AKEV]
- Flat Button
- Reversible Feature [AJNC]
- Not Included
- Overall Length [ABHP]
- 10.300 Inches Nominal
- Pin Center To Body Edge Distance [AKFK]
- 1.000 Inches Nominal
- Special Features [FEAT]
- Remove 2 Knuckles,One From Ea Side Next To The End Knuckle,0.403 In. Dist From End To Knuckle
- Style Designator [STYL]
- Butt Parallel Holes
- Surface Treatment And Location [ANNR]
- Chromate, Mil-C-5541, Class 1A Body
DLA Procurement Analysis 5340-01-333-5764
Management Data 5340-01-333-5764
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5340-01-333-5764
Freight Information 5340-01-333-5764
5340-01-333-5764 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095290. A Sub NMFC of X. It has a NMFC Description of HINGES/BUTTS NOI METAL O/T I/S. 5340-01-333-5764 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49840 which rates the freight between FCL and LCL. 5340-01-333-5764 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5340-01-333-5764 is not classified as a special type of cargo when transported by water. 5340-01-333-5764 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5340-01-333-5764 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- H
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: