6530-21-116-0406 6530211160406 211160406 CUSHION,RING,INFLATABLE
5365-00-116-0406 5365001160406 001160406 is a flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole having a solid rectangular cross-section use disk, solid, plain. for round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. the thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. for items with a thickness less than those indicated above, see shim. for items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. when thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. excludes gasket&#59; insulator (as modified) and mounting pad, electrical-electronic component.
6530-12-275-0021 6530122750021 122750021 CUSHION,RING,INFLATABLE
6110-15-116-0406 6110151160406 151160406 is an enclosure which includes mounts, and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. it is primarily designed to distribute electrical power from one or more primary power source(s) such as generator(s) and battery(ies) to one or more electrical and/or electronic item(s). it may include a cover or door. for enclosures which include only circuit breakers, switches, jacks, fuseholders, terminals and/or terminal boards, see circuit breaker box; switch box; jack box; fuse box and terminal box. for enclosure primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) see interconnecting box. for empty boxes which are designed to mount, but do not include electrical devices such as switches, jacks, fuseholders, terminals and/or terminal boards, see junction box. see also interconnecting cabinet; control (as modified); panel (1) (as modified); relay assembly; panel, power distribution; switchboard (as modified) and panel, fuse. excludes connector-switch.
6210-01-116-0406 6210011160406 011160406 is a transparent or translucent item designed to enclose or be placed in front of a light source. sections of the lens may be opaque. it may or may not include a holder. it is designed to be either a replacement unit for a specific type of light, such as light, indicator&#59; light, navigational, marine&#59; stop light, vehicular&#59; and lantern, electric or that portion of a switch, (as modified) used as an actuator and having provisions for illumination. see also, window, lighting fixture&#59; globe&#59; electric light&#59; and filter (2), (as modified).