Premium Information is available for this item - Upgrade for $1 a day
5340-01-331-7698
Angle Bracket
5340013317698 013317698 LS35112D12C06A1
A ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF. View more Angle Bracket
May 2023
4
Marketplace 5340-01-331-7698
Request a Quotation from participating marketplace vendors
Related Documents 5340-01-331-7698 1+ Documents (More...)
BUY NE FedMall Updated Every Day 5340-01-331-7698 RQST NE Updated Every Day 5340-01-331-7698 RQST
Updated Every Day 5340-01-331-7698 RQST NE Related Documents 5340-01-331-7698 1+ Documents ( More...
Restrictions 5340-01-331-7698
5340-01-331-7698 is a Angle Bracket that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5340-01-331-7698
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5340-01-331-7698
- US Air Force (FGGI)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- FGKZ
Approved Sources 5340-01-331-7698
- Part Number
- Manufacturer
- Status
- LS35112D12C06A1
- Manufacturer
- 98897 - Lockheed Martin Corp (Active)
- Primary Buy
- Primary Buy
Datasheet 5340-01-331-7698
- Characteristic
- Specifications
- FIIG
- Specifications
- A042A0
- First Leg Angle [CSSQ]
- 90.0 Degrees Nominal
- First Leg Chamfer Angle [CWPD]
- 40.0 Degrees Minimum And 50.0 Degrees Maximum
- First Leg Distance From Edge To Hole Center Along Width [AHRA]
- 0.350 Inches Minimum And 0.410 Inches Maximum
- First Leg End Width [AHQQ]
- 0.500 Inches Nominal
- First Leg Hole Arrangement Style [AKAU]
- One Hole
- First Leg Hole Diameter [AHLK]
- 0.190 Inches Minimum And 0.196 Inches Maximum
- First Leg Distance From Edge To Hole Center Along Length [AHRB]
- 0.280 Inches Minimum And 0.340 Inches Maximum
- First Leg Style [AJZU]
- Chamfered Ends
- First Leg Thickness [AHPW]
- 0.040 Inches Nominal
- First Leg Width [AHQN]
- 0.720 Inches Minimum And 0.780 Inches Maximum
- First Leg Length [ADLK]
- 1.000 Inches Minimum And 1.120 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-A-250/4,T3 Fed Spec Single Material Response
- Material [MATT]
- Aluminum Alloy 2024
- Mounting Hole Type [ACHY]
- Plain
- Second Leg Chamfer Angle [CWPG]
- 40.0 Degrees Minimum And 50.0 Degrees Maximum
- Second Leg Distance Between Hole Centers Along Width [AHLP]
- 0.365 Inches Minimum And 0.385 Inches Maximum
- Second Leg End Width [AHLH]
- 0.365 Inches Minimum And 0.385 Inches Maximum
- Second Leg Hole Arrangement Style [AKCU]
- Two Holes
- Second Leg Hole Diameter [AHLN]
- 0.098 Inches Minimum And 0.103 Inches Maximum
- Second Leg Length [ADLL]
- 0.625 Inches Minimum And 0.745 Inches Maximum
- Second Leg Distance From Edge To Hole Center Along Length [AHLW]
- 0.280 Inches Minimum And 0.340 Inches Maximum
- Second Leg Distance From Edge To Hole Center Along Width [AHLV]
- 0.150 Inches Minimum And 0.210 Inches Maximum
- Second Leg Width [AHLF]
- 0.685 Inches Minimum And 0.775 Inches Maximum
- Second Leg Relationship To First Leg [CSSP]
- Not Identical
- Second Leg Style [AKBU]
- Chamfered Ends
- Second Leg Thickness [AHPX]
- 0.040 Inches Nominal
- Style Designator [STYL]
- Angle
- Surface Treatment Document And Classification [STDC]
- Mil-P-8585 Mil Spec Single Treatment Response
- Surface Treatment [SFTT]
- Chromate Zinc
DLA Procurement Analysis 5340-01-331-7698
Management Data 5340-01-331-7698
Similar Supply Items to 5340-01-331-7698
Freight Information 5340-01-331-7698
5340-01-331-7698 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093600. A Sub NMFC of X. It has a NMFC Description of BRACKETS/BUSHINGS/JOINTS/MOUNTS ETC. 5340-01-331-7698 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49780 which rates the freight between FCL and LCL. 5340-01-331-7698 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5340-01-331-7698 is not classified as a special type of cargo when transported by water. 5340-01-331-7698 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5340-01-331-7698 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: