Premium Information is available for this item - Upgrade for $1 a day
5340-01-313-6737
Electrical-Mechanical Equipment Post
5340013136737 013136737 NAS1829 NAS1829A4E12 9798-A-0632-10
A standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance. View more Spacing Threaded Standoff
November 2023
11
Marketplace 5340-01-313-6737
Request a Quotation from participating marketplace vendors
Related Documents 5340-01-313-6737 5+ Documents (More...)
United States (US) 4. 5340-01-313-6737 Marketplace Restrictions Approved Sources Datasheet Management
NAS1829A4E12 POST,ELECTRICAL-MECHANICAL EQUIPMENT 91 EA NS Request Quotation Updated Every Day 5340-01
NAS1829A4E12 STANDOFF,THREADED,SPACING 2 EA NS Request Quotation Subscribe to View Vendor Details...
NAS1829A4E12 STANDOFF,THREADED,SPACING 91 EA NS Request Quotation Updated Every Day 5340-01-169-9780
NAS1829-3C10 A standoff that must have a threaded end(s) or be internally threaded its full length.
NAS1829-3C10 STANDOFF,THREADED,SPACING 163 EA NS Request Quotation Updated Every Day 5340-01-394-8948
NAS1829-3C04 A standoff that must have a threaded end(s) or be internally threaded its full length.
NAS1829-3C04 STANDOFF,THREADED,SPACING 99 EA NS Request Quotation Subscribe to View Vendor Details...
NAS1829-4C09 A standoff that must have a threaded end(s) or be internally threaded its full length.
NAS1829-4C09 POST,ELECTRICAL-MECHANICAL EQUIPMENT 16 EA NS Request Quotation FedMall Updated Every 15
Restrictions 5340-01-313-6737
5340-01-313-6737 is a Electrical-Mechanical Equipment Post that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5340-01-313-6737
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5340-01-313-6737
- US Air Force (FXGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKE
- Spain (YB01)
- Effective Date:
- 1 Aug 2003
Approved Sources 5340-01-313-6737
- Part Number
- Manufacturer
- Status
- NAS1829
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Incomplete Reference
- Incomplete Reference
- NAS1829A4E12
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- 9798-A-0632-10
- 1YGB8 - Carey Manufacturing Co, Inc (Active)
- Secondary Buy
- Secondary Buy
- 9798-A-0632-10
- 06540 - New Haven Mfg Corp Amatom Electronic (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Weapon Systems (WSDC) 5340-01-313-6737
DLA Procurement Analysis 5340-01-313-6737
- Last Stock Position:
- 204 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5340-01-313-6737
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5340-01-313-6737
Freight Information 5340-01-313-6737
5340-01-313-6737 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 013120. A Sub NMFC of F. It has a NMFC Description of ALUMINUM ARTICLE NOI SUB 6. 5340-01-313-6737 is rated as class 100 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 05380 which rates the freight between FCL and LCL. 5340-01-313-6737 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5340-01-313-6737 is not classified as a special type of cargo when transported by water. 5340-01-313-6737 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5340-01-313-6737
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5340-01-313-6737 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: