Premium Information is available for this item - Upgrade for $1 a day
5340-01-298-8033
Spacing Threaded Standoff
5340012988033 012988033 NAS1831 8102-SS-0256-7 NAS1831C3A04 8102SS0256-7 NAS1786C02-4 60-034887-02
A standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance. View more Spacing Threaded Standoff
November 2023
22
Marketplace 5340-01-298-8033
Request a Quotation from participating marketplace vendors
Related Documents 5340-01-298-8033 5+ Documents (More...)
NAS1831 STANDOFF,THREADED,SPACING RQST NS Request Quotation Subscribe to View Vendor Details...
NAS1831-3A04 STANDOFF,THREADED,SPACING 28 EA NS Request Quotation Subscribe to View Vendor Details...
NAS1831C3A04 NUT,PLAIN,HEXAGON 200 EA NS Request Quotation Subscribe to View Vendor Details...
NAS1831C3A04 NUT,PLAIN,HEXAGON 88 EA NS Request Quotation Subscribe to View Vendor Details...
NAS1831 STANDOFF,THREADED,SPACING RQST NS Request Quotation FedMall Updated Every 15 Minutes 5340-01-
NAS1831 POST,ELECTRICAL-MECHANICAL EQUIPMENT RQST NS Request Quotation Updated Every Day 5340-01-284
Restrictions 5340-01-298-8033
5340-01-298-8033 is a Spacing Threaded Standoff that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
End Users 5340-01-298-8033
- US Army (A919)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- A187
- Supplementary Receivers:
- CT
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKEHD
- Australia (ZA01)
- Effective Date:
- 5 Oct 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
- United Kingdom (ZK01)
- Effective Date:
- 1 Jul 2000
- Netherlands (ZN01)
- Effective Date:
- 1 Apr 1991
- Italy (ZR01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 May 2006
Approved Sources 5340-01-298-8033
- Part Number
- Manufacturer
- Status
- NAS1831
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Incomplete Reference
- Incomplete Reference
- NAS1831C3A04
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- 8102SS0256-7
- 1YGB8 - Carey Manufacturing Company, Inc. (Active)
- Secondary Buy
- Secondary Buy
- NAS1786C02-4
- 80205 - National Aerospace Standards (Active)
- Secondary Buy
- Secondary Buy
- 60-034887-02
- 15280 - Northrop Grumman Systems Corporation (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 8102SS0256-7
- 06540 - New Haven Mfg Corp Amatom Electronic (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 8102-SS-0256-7
- D9182 - Zf Industrieantriebe Witten Gmbh (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5340-01-298-8033
- Characteristic
- Specifications
- FIIG
- Specifications
- A08900
- Bearing Surface Type [CRTM]
- Flat
- Material [MATT]
- Steel Comp 303 Overall Or Steel Comp 303Se Overall
- Nominal Thread Size [CQJX]
- 0.086 Inches
- Nut Height [ADEA]
- 0.245 Inches Minimum And 0.255 Inches Maximum
- Nut Style [ACTA]
- Hexagon
- Material Document And Classification [MDCL]
- Astm A582 Assn Std All Material Responses Overall
- Thread Quantity Per Inch [CMLP]
- 56
- Thread Series [BZRR]
- Unc
- Width Across Flats [ASDB]
- 0.184 Inches Minimum And 0.192 Inches Maximum
- Specification/Standard Data [ZZZK]
- 80205-Nas1831 Professional/Industrial Association Standard
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 2B
Weapon Systems (WSDC) 5340-01-298-8033
DLA Procurement Analysis 5340-01-298-8033
- Last Stock Position:
- 186 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5340-01-298-8033
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5340-01-298-8033
Freight Information 5340-01-298-8033
5340-01-298-8033 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5340-01-298-8033 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5340-01-298-8033 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5340-01-298-8033 is not classified as a special type of cargo when transported by water. 5340-01-298-8033 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5340-01-298-8033
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 5340-01-298-8033 8 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE7L123V9442
- 27 Sep 2023
- Subscribe
- 1480
- Subscribe
- Subscribe
- Subscribe
- SPE4A122V0105
- 16 Nov 2021
- Subscribe
- 531
- Subscribe
- Subscribe
- Subscribe
- SPE4A122V0105P00001
- 16 Nov 2021
- Subscribe
- 531
- Subscribe
- Subscribe
- Subscribe
- SPE4A122V0056
- 18 Oct 2021
- Subscribe
- 832
- Subscribe
- Subscribe
- Subscribe
- SPE5E717V2326
- 10 Feb 2017
- Subscribe
- 269
- Subscribe
- Subscribe
- Subscribe
- SPE5E715M2991
- 12 Jun 2015
- Subscribe
- 302
- Subscribe
- Subscribe
- Subscribe
- SPE5E714V3414
- 22 Apr 2014
- Subscribe
- 42
- Subscribe
- Subscribe
- Subscribe
- SPE5E714V0200
- 10 Oct 2013
- Subscribe
- 44
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5340-01-298-8033 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: