Premium Information is available for this item - Upgrade for $1 a day
5340-01-276-0577
Spring Tension Clip
5340012760577 012760577 6024-38A 100-200-4B-6 577R468H33 577R468
A preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available. View more Spring Tension Clip
June 2023
9
Marketplace 5340-01-276-0577
Request a Quotation from participating marketplace vendors
Related Documents 5340-01-276-0577 5+ Documents (More...)
United States (US) 4. 5340-01-276-0577 Marketplace Restrictions Approved Sources Datasheet Management
NE FedMall Updated Every Day 5340-01-276-0577 RQST NE Updated Every Day 5340-01-276-0577 RQST Updated
-H18 6020-96A 577R468 A preformed item of semirigid material designed to retain, position, fasten, or
www.nsnlookup.com /fsg-53/fsc-5340/us 5340-00-060-9721 Spring Tension Clip 5340000609721000609721 577R468
Spring Tension Clip 5340011220642011220642 -H18 6020-96A 577R468 A preformed item of semirigid Spring
Tension Clip 5340008110634008110634 -H18 6020-96A 577R468 A preformed item of semirigid -H18 https//
Account Upgrade 5340-00-920-2730Spring Tension Clip5340009202730 009202730 10-200-11-83 577R468H15 577R468
-H18 6020-96A 577R468 A preformed item of semirigid material designed to retain, position, fasten, or
Upgrade your Account Upgrade 5340-00-052-6727Spring Tension Clip5340000526727 000526727 577R468H26 577R468
Spring Tension Clip 5340008110634008110634 -H18 6020-96A 577R468 A preformed item of semirigid -H18
Restrictions 5340-01-276-0577
5340-01-276-0577 is a Spring Tension Clip that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5340-01-276-0577
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5340-01-276-0577
- US Air Force (FXGI)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- HD
- MOE Rule:
- RGX1
- Effective Date:
- 1 Sep 2005
- Supplementary Collaborators:
- TR
Approved Sources 5340-01-276-0577
- Part Number
- Manufacturer
- Status
- 6024-38A
- Manufacturer
- 91506 - Augat Inc (Replaced)
- Original Design
- Original Design
- 100-200-4B-6
- 99378 - Atlee Of Delaware, Incorporated (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 577R468H33
- 48306 - Northrop Grumman Support Services (Active)
- Vendor Drawing
- Vendor Drawing
- 577R468H33
- 97942 - Northrop Grumman Systems Corporation (Active)
- Obsolete Drawing
- Obsolete Drawing
- 577R468
- 97942 - Northrop Grumman Systems Corporation (Active)
- Informational Drawing
- Informational Drawing
Datasheet 5340-01-276-0577
- Characteristic
- Specifications
- FIIG
- Specifications
- A03100
- Distance From Loop Center To End [AZWE]
- 0.2075 Inches Nominal
- Hole Diameter [AAUB]
- 0.100 Inches Minimum And 0.106 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-S-766,Cond A Fed Spec Single Material Response Overall
- Material Thickness [ABPX]
- 0.011 Inches Minimum And 0.014 Inches Maximum
- Material [MATT]
- Steel Comp 304 Overall
- Mounting Method [AXGY]
- Unthreaded Hole
- Length [ABRY]
- 0.340 Inches Nominal
- Loop/Holding Dimension [CJYS]
- 0.266 Inches Minimum And 0.291 Inches Maximum
- Overall Height [ABKW]
- 0.378 Inches Minimum And 0.382 Inches Maximum
- Special Features [FEAT]
- 4 Slots Along Width
- Width [ABGL]
- 0.740 Inches Minimum And 0.760 Inches Maximum
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Type 2,Class 2 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall And Chromate Overall
Weapon Systems (WSDC) 5340-01-276-0577
DLA Procurement Analysis 5340-01-276-0577
Management Data 5340-01-276-0577
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5340-01-276-0577
Freight Information 5340-01-276-0577
5340-01-276-0577 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 094220. A Sub NMFC of X. It has a NMFC Description of CLIPS SHEET STEEL NOI. 5340-01-276-0577 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49780 which rates the freight between FCL and LCL. 5340-01-276-0577 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5340-01-276-0577 is not classified as a special type of cargo when transported by water. 5340-01-276-0577 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5340-01-276-0577
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- 50
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5340-01-276-0577 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- S
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: