Premium Information is available for this item - Upgrade for $1 a day
5340-01-222-2433
Electrical-Mechanical Equipment Post
5340012222433 012222433 NAS1831 NAS1831C3B17 NAS1786C04-17 623-0729-001 8087-SS-0440-7 341128
A standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance. View more Spacing Threaded Standoff
November 2023
18
Marketplace 5340-01-222-2433
Request a Quotation from participating marketplace vendors
Related Documents 5340-01-222-2433 5+ Documents (More...)
United States (US) 4. 5340-01-222-2433 Marketplace Restrictions Approved Sources Datasheet Management
EQUIPMENT 54 EA NS Request Quotation Updated Every Day 5340-01-222-2433 RQST NE Updated Every Day 5340
PLATE,STRUCTURAL,AIRCRAFT 13 EA NS Request Quotation Subscribe to View Vendor Details... 341128 PLATE
Post5340012222433 012222433 NAS1831 NAS1831C3B17 NAS1786C04-17 623-0729-001 8087-SS-0440-7 341128 POST
Restrictions 5340-01-052-9528 DEMIL: A | DEMILI https//www.nsnlookup.com /fsg-53/fsc-5340/us 5340-01-222-2433
Electrical-Mechanical Equipment Post Documents 5340-01-222-2433 5+ Documents ( More... ) https/
Restrictions 5340-01-070-8316 DEMIL: A | DEMILI https//www.nsnlookup.com /fsg-53/fsc-5340/us 5340-01-222-2433
Electrical-Mechanical Equipment Post Agency (DS)IZDiscontinued-Use 5340-01-222-2433 https//www.nsnlookup.com
Electrical-Mechanical Equipment Post Agency (DS)IZDiscontinued-Use 5340-01-222-2433 https//www.nsnlookup.com
Force (DF)FZDiscontinued-Use 5340-01-222-2433Defense Logistics Agency (DS)IZDiscontinued-Use 5340-01-222-2433
Restrictions 5340-01-222-2433
5340-01-222-2433 is a Electrical-Mechanical Equipment Post that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
End Users 5340-01-222-2433
- US Army (A919)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- A187
- Supplementary Receivers:
- CT
- US Air Force (FXGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXKZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- MC10
- US Navy (N9BZ)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKE
- Canada (ZC01)
- Effective Date:
- 1 Oct 2001
Approved Sources 5340-01-222-2433
- Part Number
- Manufacturer
- Status
- NAS1831
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Incomplete Reference
- Incomplete Reference
- NAS1831C3B17
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- NAS1786C04-17
- 80205 - National Aerospace Standards (Active)
- Transferred
- Transferred
- 623-0729-001
- 13499 - Rockwell Collins, Inc. (Active)
- Transferred
- Transferred
- 8087-SS-0440-7
- 06540 - New Haven Mfg Corp Amatom Electronic (Replaced)
- Transferred
- Transferred
- 341128
- 76301 - The Boeing Company (Active)
- Transferred
- Transferred
Datasheet 5340-01-222-2433
- Characteristic
- Specifications
- FIIG
- Specifications
- A08900
- Cross-Sectional Shape [ANLR]
- Hexagon
- Length [ABRY]
- 1.058 Inches Minimum And 1.068 Inches Maximum
- Width Across Flats [ASDB]
- 0.184 Inches Minimum And 0.192 Inches Maximum
- Specification/Standard Data [ZZZK]
- 80205-Nas1831 Professional/Industrial Association Standard
- Style Designator [STYL]
- Left Internal And Right Internal Threads
Weapon Systems (WSDC) 5340-01-222-2433
DLA Procurement Analysis 5340-01-222-2433
- Last Stock Position:
- 242 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5340-01-222-2433
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Oct 2022
- US Marine Corps (DM)
- EA
- Subscribe
- 1
- EA
- Nov 2021
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Oct 2021
- US Marine Corps (DM)
- EA
- Subscribe
- 1
- EA
- Oct 2020
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Jan 2020
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
Similar Supply Items to 5340-01-222-2433
Freight Information 5340-01-222-2433
5340-01-222-2433 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of J. It has a NMFC Description of HARDWARE, NOI SUB 9. 5340-01-222-2433 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5340-01-222-2433 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5340-01-222-2433 is not classified as a special type of cargo when transported by water. 5340-01-222-2433 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5340-01-222-2433
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 1.0" H x 0.1" W x -- L
- --
- --
- Physical Protection
- Any Suitable Process
- 1.0" H x 0.1" W x -- L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 5340-01-222-2433 1 Records
Contracting Technical Data File (CTDF) 5340-01-222-2433 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: