Premium Information is available for this item - Upgrade for $1 a day
5340-01-211-6237
Butt Hinge
5340012116237 012116237 A-A-55594 AA55594-18C MS35829-18C
A hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side. View more Butt Hinge
November 2023
4
Marketplace 5340-01-211-6237
Request a Quotation from participating marketplace vendors
Related Documents 5340-01-211-6237 5+ Documents (More...)
BUY NE FedMall Updated Every 15 Minutes 5340-01-211-6237 BUY NE FedMall Updated Every Day 5340-
01-211-6237 RQST NE Updated Every Day 5340-01-211-6237 RQST Updated Every Day 5340-01-211-6237 RQST NE
MS35829-12C AA55594-12C A-A-55594-12C MS35829-2C A hinge usually with rectangularly shaped leaves.
MS35829-12C AA55594-12C A-A-55594-12C MS35829-2C A hinge usually with rectangularly shaped leaves.
AA55594-14C A-A-55594-14C MS35829-14C A hinge usually with rectangularly shaped leaves.
AA55594-14C A-A-55594-14C MS35829-14C A hinge usually with rectangularly shaped leaves.
MS35829-12C AA55594-12C A-A-55594-12C MS35829-2C A hinge usually with rectangularly shaped leaves.
https//www.nsnlookup.com /fsg-53/fsc-5340/us 5340-00-003-4025 Butt Hinge 5340000034025000034025,A-A-55594
//www.nsnlookup.com /fsg-53/fsc-5340/us 5340-01-211-6237 Butt Hinge 5340012116237 012116237,A-A-55594
MS35829-12C AA55594-12C A-A-55594-12C MS35829-2C A hinge usually with rectangularly shaped leaves.
Restrictions 5340-01-211-6237
5340-01-211-6237 is a Butt Hinge that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
End Users 5340-01-211-6237
- US Army (A919)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- A187
- US Air Force (FXGI)
- Effective Date:
- 1 Sep 2005
Approved Sources 5340-01-211-6237
- Part Number
- Manufacturer
- Status
- AA55594-18C
- Manufacturer
- 58536 - Federal Commercial Item Description (Active)
- Definitive Standard
- Definitive Standard
- A-A-55594
- 58536 - Federal Commercial Item Description (Active)
- Incomplete Standard
- Incomplete Standard
- MS35829-18C
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5340-01-211-6237
- Characteristic
- Specifications
- FIIG
- Specifications
- A25100
- Hinge Mounting Type [AKER]
- Full Surface
- Material Thickness [ABPX]
- 0.070 Inches Minimum And 0.080 Inches Maximum
- Knuckle Quantity [AKEX]
- 42
- Knuckle Type [AKNB]
- Friction
- Material And Location [ANNQ]
- Steel, Qq-S-766, Class 301, Cond A Overall Err-100 Err-100 Or Steel, Qq-S-766, Class 302 Overall Err-100 Err-100 Or Steel, Qq-W-423, Cond B Overall Err-100 Err-100
- Material And Location [ANNQ]
- Steel, Qq-W-423, Comp 302, Form 1, Cond B Pin Err-100 Err-100
- Pin Removability [AKES]
- Nonremovable
- Reversible Feature [AJNC]
- Not Included
- Overall Length [ABHP]
- 84.000 Inches Nominal
- Performance Type [AGLD]
- Not Rated
- Pin Center To Body Edge Distance [AKFK]
- 1.469 Inches Minimum And 1.531 Inches Maximum
- Pin Diameter [ABVV]
- 0.248 Inches Minimum And 0.252 Inches Maximum
- Style Designator [STYL]
- Butt
DLA Procurement Analysis 5340-01-211-6237
Management Data 5340-01-211-6237
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5340-01-211-6237
Freight Information 5340-01-211-6237
5340-01-211-6237 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095300. A Sub NMFC of Z. It has a NMFC Description of HINGES/BUTTS NOI I/S. 5340-01-211-6237 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49860 which rates the freight between FCL and LCL. 5340-01-211-6237 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5340-01-211-6237 is not classified as a special type of cargo when transported by water. 5340-01-211-6237 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5340-01-211-6237
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- No Requirements
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- No Requirement
- Special requirements
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Procurement History 5340-01-211-6237 1 Records
Contracting Technical Data File (CTDF) 5340-01-211-6237 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: