Premium Information is available for this item - Upgrade for $1 a day
5340-01-203-7791
Spacing Threaded Standoff
5340012037791 012037791 NAS1831 NAS1831A4C06 59818
A standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance. View more Spacing Threaded Standoff
November 2023
19
Marketplace 5340-01-203-7791
Request a Quotation from participating marketplace vendors
Related Documents 5340-01-203-7791 5+ Documents (More...)
NAS1831 STANDOFF,THREADED,SPACING RQST NS Request Quotation Subscribe to View Vendor Details... 59818
NAS1831A4C06 STANDOFF,THREADED,SPACING 15 EA NS Request Quotation FedMall Updated Every 15 Minutes 5340
NAS1831A4C06 NUT,PLAIN,HEXAGON 15 EA NS Request Quotation Updated Every Day 5310-01-086-3567 RQST Updated
States (US) 4. 5310-01-086-3567 Marketplace Restrictions Approved Sources Datasheet Management NAS1831A4C06
.. ) https//www.nsnlookup.com /fsg-51/fsc-5120/fr 5120-14-404-4020 Driftpin 5120144044020144044020 59818
https//www.nsnlookup.com /fsg-53/fsc-5340/us 5340-01-298-7016 Electrical-Mechanical Equipment Post,59818
/fsg-25/fsc-2540/uk 2540-99-737-5098 Vehicular Mirror Head 2540997375098997375098 WX950-TUNNEL331/59818
https//www.nsnlookup.com /fsg-53/fsc-5340/us 5340-01-298-7016 Electrical-Mechanical Equipment Post,59818
www.nsnlookup.com /fsg-48/fsc-4820/us 4820-01-084-8428 Fluid Valve Stem 4820010848428010848428 073-59818
4020Driftpin5120144044020 144044020 59818 https https//www.nsnlookup.com /fsg-48/fsc-4820/us 4820-01
Restrictions 5340-01-203-7791
5340-01-203-7791 is a Spacing Threaded Standoff that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5340-01-203-7791
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5340-01-203-7791
- US Army (A919)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- A187
- Supplementary Receivers:
- CL
- US Air Force (FXGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXKZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Jul 2010
- US Navy (N9BZ)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
Approved Sources 5340-01-203-7791
- Part Number
- Manufacturer
- Status
- NAS1831
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Incomplete Reference
- Incomplete Reference
- NAS1831A4C06
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- 59818
- 87690 - The Viking Corporation (Active)
- Transferred
- Transferred
Datasheet 5340-01-203-7791
- Characteristic
- Specifications
- FIIG
- Specifications
- A08900
- Bearing Surface Type [CRTM]
- Flat
- Material Document And Classification [MDCL]
- Qq-A-225/6,T4 Fed Spec 1St Material Response Overall Or Qq-A-225/3,T4 Fed Spec 2Nd Material Response Overall
- Material [MATT]
- Aluminum Alloy 2024 Overall Or Aluminum Alloy 2011 Overall
- Nominal Thread Size [CQJX]
- 0.138 Inches
- Nut Height [ADEA]
- 0.370 Inches Minimum And 0.380 Inches Maximum
- Nut Style [ACTA]
- Hexagon
- Width Across Flats [ASDB]
- 0.246 Inches Minimum And 0.254 Inches Maximum
- Specification/Standard Data [ZZZK]
- 80205-Nas1831 Professional/Industrial Association Standard
- Surface Treatment Document And Classification [STDC]
- Mil-A-8625,Ty 1,Cl 1 Mil Spec Single Treatment Response Overall Or Mil-A-8625,Ty 2,Cl 1 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Anodize Overall
- Thread Class [AAJD]
- 2B
- Thread Direction [AAJF]
- Right-Hand
- Thread Series [BZRR]
- Unc
- Thread Quantity Per Inch [CMLP]
- 32
Weapon Systems (WSDC) 5340-01-203-7791
DLA Procurement Analysis 5340-01-203-7791
- Last Stock Position:
- 96 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5340-01-203-7791
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 6
- Critical Repair Part to a Non-Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
Similar Supply Items to 5340-01-203-7791
Freight Information 5340-01-203-7791
5340-01-203-7791 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 013540. A Sub NMFC of X. It has a NMFC Description of ALUM NUTS. 5340-01-203-7791 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 05680 which rates the freight between FCL and LCL. 5340-01-203-7791 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5340-01-203-7791 is not classified as a special type of cargo when transported by water. 5340-01-203-7791 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5340-01-203-7791
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5340-01-203-7791 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: