Premium Information is available for this item - Upgrade for $1 a day
5340-01-203-2821
Double Angle Bracket
5340012032821 012032821 12338725 5575862
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING. View more Double Angle Bracket
November 2023
6
Marketplace 5340-01-203-2821
Request a Quotation from participating marketplace vendors
Related Documents 5340-01-203-2821 2+ Documents (More...)
(Identification) 1/4 NSN 5340-01-203-2821 (Identification) 2/4 NSN 5340-01-203-2821 (Identification
BUY NE FedMall Updated Every Day 5340-01-203-2821 RQST NE Updated Every Day 5340-01-203-2821 RQST
https//www.nsnlookup.com /fsg-53/fsc-5340/us 5340-01-209-7797 Angle Bracket 5340012097797012097797 12338725
Double Angle Bracket 5340012032821 012032821 RQST NE Updated Every Day 5340-01-203-2821 RQST https
Restrictions 5340-01-203-2821
5340-01-203-2821 is a Double Angle Bracket that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
End Users 5340-01-203-2821
- US Army (A919)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- A187
- Supplementary Receivers:
- AZ
- US Air Force (FXGI)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- FXKZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- MC10
- US Navy (N9BZ)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
Approved Sources 5340-01-203-2821
- Part Number
- Manufacturer
- Status
- 12338725
- Manufacturer
- 19207 - U S Army Tank Automotive Command (Active)
- Primary Buy
- Primary Buy
- 5575862
- 34623 - Am General Llc (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5340-01-203-2821
- Characteristic
- Specifications
- FIIG
- Specifications
- A042A0
- Center Section Height [AHPZ]
- 2.240 Inches Nominal
- Center Section Thickness [AHQB]
- 0.080 Inches Nominal
- Center Section Width [AHQA]
- 3.500 Inches Nominal
- Features Provided [CBBL]
- Nut
- First Leg Angle [CSSQ]
- 90.0 Degrees Nominal
- First Leg Distance From Edge To Hole Center Along Width [AHRA]
- 1.750 Inches Nominal
- First Leg Hole Arrangement Style [AKAU]
- One Hole
- First Leg Hole Diameter [AHLK]
- 0.331 Inches Minimum And 0.335 Inches Maximum
- First Leg Distance From Edge To Hole Center Along Length [AHRB]
- 0.500 Inches Nominal
- First Leg Style [AJZU]
- Square
- First Leg Thickness [AHPW]
- 0.080 Inches Nominal
- First Leg Width [AHQN]
- 3.500 Inches Nominal
- First Leg Length [ADLK]
- 1.000 Inches Nominal
- Material [MATT]
- Aluminum Alloy 6010
- Mounting Hole Type [ACHY]
- Plain
- Second Leg Distance Between Hole Centers Along Width [AHLP]
- 2.240 Inches Nominal
- Second Leg Distance From Edge To Hole Center Along Length [AHLW]
- 0.520 Inches Nominal
- Second Leg Distance From Edge To Hole Center Along Width [AHLV]
- 0.630 Inches Nominal
- Second Leg Angle [CSSR]
- 90.0 Degrees Nominal
- Second Leg Length [ADLL]
- 1.000 Inches Nominal
- Second Leg Relationship To First Leg [CSSP]
- Not Identical
- Second Leg Slot Length [AHLZ]
- 0.380 Inches Nominal
- Second Leg Hole Arrangement Style [AKCU]
- 2 Slots
- Second Leg Slot Width [AHMA]
- 0.310 Inches Nominal
- Second Leg Style [AKBU]
- Square
- Second Leg Thickness [AHPX]
- 0.080 Inches Nominal
- Second Leg Width [AHLF]
- 3.500 Inches Nominal
- Style Designator [STYL]
- Double Angle
Weapon Systems (WSDC) 5340-01-203-2821
DLA Procurement Analysis 5340-01-203-2821
- Last Stock Position:
- 54 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5340-01-203-2821
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5340-01-203-2821
Freight Information 5340-01-203-2821
5340-01-203-2821 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 013120. A Sub NMFC of F. It has a NMFC Description of ALUMINUM ARTICLE NOI SUB 6. 5340-01-203-2821 is rated as class 100 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 05380 which rates the freight between FCL and LCL. 5340-01-203-2821 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5340-01-203-2821 is not classified as a special type of cargo when transported by water. 5340-01-203-2821 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5340-01-203-2821
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5340-01-203-2821 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Y
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: