Premium Information is available for this item - Upgrade for $1 a day
5340-01-182-0085
Electrical-Mechanical Equipment Post
5340011820085 011820085 229-029474 229-023232 5340PL0858774 5340PL1727502
A standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance. View more Spacing Threaded Standoff
November 2023
16
Marketplace 5340-01-182-0085
Request a Quotation from participating marketplace vendors
Restrictions 5340-01-182-0085
5340-01-182-0085 is a Electrical-Mechanical Equipment Post that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
End Users 5340-01-182-0085
- US Air Force (FUGI)
- Effective Date:
- 1 Jun 2006
- Former MOE Rule:
- FUKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
- Poland (WP01)
- Effective Date:
- 1 Apr 2007
- Singapore (YJ01)
- Effective Date:
- 1 Apr 1991
- Australia (ZA01)
- Effective Date:
- 1 Aug 2006
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Netherlands (ZN01)
- Effective Date:
- 1 Aug 2011
- Portugal (ZP01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 May 2008
Approved Sources 5340-01-182-0085
- Part Number
- Manufacturer
- Status
- 229-029474
- Manufacturer
- K0656 - Bae Systems (Operations) Limited (Active)
- Primary Buy
- Primary Buy
- 229-029474
- 33827 - Bae Systems Integrated Defense (Active)
- Secondary Buy
- Secondary Buy
- 229-023232
- K0656 - Bae Systems (Operations) Limited (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 5340PL0858774
- 9009H - Jednolity Indeks Materialowy - (Active)
- NATO Reference
- NATO Reference
- 5340PL1727502
- 9009H - Jednolity Indeks Materialowy - (Active)
- NATO Reference
- NATO Reference
Datasheet 5340-01-182-0085
- Characteristic
- Specifications
- FIIG
- Specifications
- A08900
- Cross-Sectional Shape [ANLR]
- Rectangular
- Diameter [ABMZ]
- 0.800 Inches Nominal
- Style Designator [STYL]
- Left Internal And Right External Thread
- Distance From Centerline To Flat [AASY]
- 0.375 Inches Nominal
- Length [ABRY]
- 0.250 Inches Nominal
- Distance From Centerline To Second Flat [CMPD]
- 0.375 Inches Nominal
- Special Features [FEAT]
- 1 Hole In Shoulder 0.051 In. Dia Drill Thru
Weapon Systems (WSDC) 5340-01-182-0085
DLA Procurement Analysis 5340-01-182-0085
- Last Stock Position:
- 5 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5340-01-182-0085
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- WF
- F-16 AIR COMBAT FIGHTER
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5340-01-182-0085
Freight Information 5340-01-182-0085
5340-01-182-0085 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of J. It has a NMFC Description of HARDWARE, NOI SUB 9. 5340-01-182-0085 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. 5340-01-182-0085 is rated as class 70 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5340-01-182-0085 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5340-01-182-0085 is not classified as a special type of cargo when transported by water. 5340-01-182-0085 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5340-01-182-0085
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5340-01-182-0085 5 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE7L123P9376
- 27 Sep 2023
- Subscribe
- 58
- Subscribe
- Subscribe
- Subscribe
- SPE7L123V8354
- 14 Aug 2023
- Subscribe
- 46
- Subscribe
- Subscribe
- Subscribe
- SPE7L122P6269
- 26 May 2022
- Subscribe
- 70
- Subscribe
- Subscribe
- Subscribe
- SPE5E216V4342
- 11 Mar 2016
- Subscribe
- 34
- Subscribe
- Subscribe
- Subscribe
- SPE5EM15M0774
- 10 Mar 2015
- Subscribe
- 50
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5340-01-182-0085 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: