Premium Information is available for this item - Upgrade for $1 a day
5340-01-176-4031
Double Angle Bracket
5340011764031 011764031 3141300-101-3 3141300-01-3
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING. View more Double Angle Bracket
May 2023
6
Marketplace 5340-01-176-4031
Request a Quotation from participating marketplace vendors
Related Documents 5340-01-176-4031 5+ Documents (More...)
Restrictions 5340-01-176-4031
5340-01-176-4031 is a Double Angle Bracket that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
End Users 5340-01-176-4031
- US Air Force (FXGI)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5340-01-176-4031
- Part Number
- Manufacturer
- Status
- 3141300-101-3
- Manufacturer
- 04DG4 - General Dynamics Mission Systems, (Active)
- Primary Buy
- Primary Buy
- 3141300-101-3
- 17996 - General Dynamics-Ots, Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 3141300-01-3
- 99696 - Lockheed Martin Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 3141300-101-3
- 05699 - Brunswick Corp Defense Div (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5340-01-176-4031
- Characteristic
- Specifications
- FIIG
- Specifications
- A042A0
- Center Section Thickness [AHQB]
- 0.125 Inches Nominal
- Center Section Width [AHQA]
- 0.750 Inches Nominal
- Center Section Height [AHPZ]
- 0.275 Inches Minimum And 0.279 Inches Maximum
- First Leg Hole Arrangement Style [AKAU]
- No Hole
- First Leg Style [AJZU]
- Square
- First Leg Thickness [AHPW]
- 0.125 Inches Nominal
- First Leg Width [AHQN]
- 0.750 Inches Nominal
- First Leg Length [ADLK]
- 0.380 Inches Nominal
- Material Document And Classification [MDCL]
- Qq-A-250/11,T4 Fed Spec Single Material Response
- Material [MATT]
- Aluminum Alloy 6061
- Mounting Hole Type [ACHY]
- Plain
- Second Leg Distance From Edge To Hole Center Along Length [AHLW]
- 0.380 Inches Nominal
- Second Leg Distance From Edge To Hole Center Along Width [AHLV]
- 0.380 Inches Nominal
- Second Leg Length [ADLL]
- 1.000 Inches Nominal
- Second Leg Relationship To First Leg [CSSP]
- Not Identical
- Second Leg End Width [AHLH]
- 0.250 Inches Nominal
- Second Leg Hole Arrangement Style [AKCU]
- One Hole
- Second Leg Hole Diameter [AHLN]
- 0.219 Inches Nominal
- Second Leg Style [AKBU]
- Chamfered Ends
- Second Leg Thickness [AHPX]
- 0.125 Inches Nominal
- Second Leg Width [AHLF]
- 0.750 Inches Nominal
- Style Designator [STYL]
- Double Angle
DLA Procurement Analysis 5340-01-176-4031
Management Data 5340-01-176-4031
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5340-01-176-4031
Freight Information 5340-01-176-4031
5340-01-176-4031 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 013120. A Sub NMFC of F. It has a NMFC Description of ALUMINUM ARTICLE NOI SUB 6. 5340-01-176-4031 is rated as class 100 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 05380 which rates the freight between FCL and LCL. 5340-01-176-4031 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5340-01-176-4031 is not classified as a special type of cargo when transported by water. 5340-01-176-4031 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5340-01-176-4031
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5340-01-176-4031 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: