5340-01-173-6285

(CAGE Code 16848) Mar 1984 5340-01-173-6285 Housing Shear Shaft 301053-1RNCC: 3 | RNVC: 2 | DAC: 6 7

-6285 Mar 1984 6210-01-173-6284 Lamp Indicator 414842-1RNCC: 3 | RNVC: 2 | DAC: 6 7 Mar 1984 5340-01-173-6285

1984 5845-01-173-6282 Socket Connector 100588-9000-042RNCC: 5 | RNVC: 9 | DAC: 2 7 Mar 1984 5340-01-173-6285

5310-99-604-5543 5310996045543 996045543 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5315-12-136-3646 5315121363646 121363646 is a cone-shaped, unthreaded, metallic or nonmetallic item, tapered through its entire length, primarily used to position and hold two or more mating parts in alignment.