5340-01-165-6978

4320-01-512-7861 4320015127861 015127861 is a combination of items used in sealing various rotary shaft equipment. it may include items such as bellows, disk, drive ring, flexible diaphragm, mating ring, o-ring, retainer, seat, sleeve, washer and the like. excludes seal, plain encased.

5995-37-512-7861 5995375127861 375127861 is a definite continuous length of cable, special purpose, electrical, having one or more ends processed or terminated in fittings which provide for connection to other items. excludes items having branches or forks. excludes lead, test and cable and conduit assembly, electrical.

6145-00-512-7861 6145005127861 005127861 CABLE,SPECIAL PURPOSE,ELECTRICAL

5365-14-512-7861 5365145127861 145127861 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.