Premium Information is available for this item - Upgrade for $1 a day
5340-01-151-6159
Dust And Moisture Seal Protective Cap-Plug
5340011516159 011516159 NAS831 NAS831-32B MS90376-32RF
An item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. View more Dust And Moisture Seal Protective Cap
November 2023
12
Marketplace 5340-01-151-6159
Request a Quotation from participating marketplace vendors
Related Documents 5340-01-151-6159 5+ Documents (More...)
NAS831-32B CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL 380 EA NS Request Quotation Updated Every Day 5340
-01-151-6159 RQST NE Updated Every Day 5340-01-151-6159 RQST Updated Every Day 5340-01-151-6159 RQST
NAS831-14 9570042390 MS90376-14R 494115000600 97121-414R 0085 22 P 435 CAPPROT-22-I3D A 70206 10117377
NAS831-14 CAP,PROTECTIVE,DUST AND MOISTURE SEAL 100 HD NS Request Quotation Subscribe to View Vendor
150-0754-010 686B012810 70777 NAS831-10 0083 22 P 435 CAPPROT-16-I3D A 25815-461 859099-00 MS90376-10R
MS90376-10R CAP,PROTECTIVE,DUST AND MOISTURE SEAL 9077 HD NS Request Quotation NAS831-10 CAP,PROTECTIVE
NAS831-22B SEC-22 An item specifically designed to fit over the opening(s) of various items to provide
01 NAS831-32B MS90376-32RF An item specifically designed to fit over the opening(s) of various items
NAS831-20B CAP,PROTECTIVE,DUST AND MOISTURE SEAL 400 EA NS Request Quotation Updated Every Day 5340-
01 NAS831-32B MS90376-32RF An item specifically designed to fit over the opening(s) of various items
Restrictions 5340-01-151-6159
5340-01-151-6159 is a Dust And Moisture Seal Protective Cap-Plug that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5340-01-151-6159
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5340-01-151-6159
- US Army (A919)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- A187
- US Air Force (FXGI)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- HDKE
- Poland (WP01)
- Effective Date:
- 1 Jul 2011
- Australia (ZA01)
- Effective Date:
- 1 Jun 1996
- Republic of Korea (ZH01)
- Effective Date:
- 1 Jul 2015
Approved Sources 5340-01-151-6159
- Part Number
- Manufacturer
- Status
- NAS831
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Incomplete Reference
- Incomplete Reference
- NAS831-32B
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- MS90376-32RF
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5340-01-151-6159
- Characteristic
- Specifications
- FIIG
- Specifications
- A539K0
- Closed End Overall Diameter [BZMY]
- 2.189 Inches Minimum And 2.251 Inches Maximum
- Material Document And Classification [MDCL]
- Mil-B-81705, Type 2 Mil Spec Single Material Response
- Material [MATT]
- Plastic
- Open End Inside Diameter [ATZB]
- 1.955 Inches Minimum And 1.975 Inches Maximum
- Length Under Shoulder [BZNB]
- 0.400 Inches Minimum And 0.534 Inches Maximum
Weapon Systems (WSDC) 5340-01-151-6159
DLA Procurement Analysis 5340-01-151-6159
- Last Stock Position:
- 1588 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5340-01-151-6159
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5340-01-151-6159
Freight Information 5340-01-151-6159
5340-01-151-6159 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5340-01-151-6159 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5340-01-151-6159 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5340-01-151-6159 is not classified as a special type of cargo when transported by water. 5340-01-151-6159 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5340-01-151-6159
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5340-01-151-6159 3 Records
Contracting Technical Data File (CTDF) 5340-01-151-6159 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: