Premium Information is available for this item - Upgrade for $1 a day
5340-01-055-1491
Section Block Clamp
5340010551491 010551491 204-70298-1
A single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE. View more Section Block Clamp
November 2023
4
Marketplace 5340-01-055-1491
Request a Quotation from participating marketplace vendors
Related Documents 5340-01-055-1491 1+ Documents (More...)
BUY NE FedMall Updated Every Day 5340-01-055-1491 RQST NE Updated Every Day 5340-01-055-1491 RQST
Updated Every Day 5340-01-055-1491 RQST NE Related Documents 5340-01-055-1491 1+ Documents ( More...
Restrictions 5340-01-055-1491
5340-01-055-1491 is a Section Block Clamp that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. The precious metals content of this item is unknown.
End Users 5340-01-055-1491
- US Air Force (FXGI)
- Effective Date:
- 1 Sep 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5340-01-055-1491
- Part Number
- Manufacturer
- Status
- 204-70298-1
- Manufacturer
- 81205 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
Datasheet 5340-01-055-1491
- Characteristic
- Specifications
- FIIG
- Specifications
- A105A0
- Distance From Center Of Mounting Hole To Edge Along The Width [AFEC]
- 0.450 Inches Nominal
- Distance From End To First Clamping Hole Center [CWXN]
- 0.960 Inches Nominal
- Distance From End To First Mounting Hole Center [CWXC]
- 0.290 Inches Minimum And 0.330 Inches Maximum
- Block Height [BYGG]
- 0.600 Inches Minimum And 0.630 Inches Maximum
- Center To Center Distance Between First And Second Clamping Holes [CWXZ]
- 1.430 Inches Nominal
- Center To Center Distance Between First And Second Mounting Holes [AXPC]
- 1.430 Inches Nominal
- Clamping Hole Diameter [CWWM]
- 0.440 Inches Nominal First Hole
- Clamping Hole Diameter [CWWM]
- 0.560 Inches Nominal Second Hole
- Clamping Hole Quantity [CWTD]
- 2
- Mounting Facility [AZGM]
- Unthreaded Hole
- Mounting Hole Diameter [ABTB]
- 0.338 Inches Minimum And 0.358 Inches Maximum
- Mounting Hole Quantity [ABTJ]
- 2
- Overall Length [ABHP]
- 2.770 Inches Minimum And 2.810 Inches Maximum
- Overall Width [ABMK]
- 0.730 Inches Nominal
- Style Designator [STYL]
- Rectangular
Weapon Systems (WSDC) 5340-01-055-1491
DLA Procurement Analysis 5340-01-055-1491
- Last Stock Position:
- 164 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5340-01-055-1491
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5340-01-055-1491
Freight Information 5340-01-055-1491
5340-01-055-1491 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5340-01-055-1491 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5340-01-055-1491 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5340-01-055-1491 is not classified as a special type of cargo when transported by water. 5340-01-055-1491 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5340-01-055-1491
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5340-01-055-1491 4 Records
Contracting Technical Data File (CTDF) 5340-01-055-1491 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: