Premium Information is available for this item - Upgrade for $1 a day
5340-01-032-8112
Plain Solid Disk
5340010328112 010328112 32063
A circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK. View more Plain Solid Disk
November 2023
5
Marketplace 5340-01-032-8112
Request a Quotation from participating marketplace vendors
Related Documents 5340-01-032-8112 5+ Documents (More...)
United States (US) 4. 5340-01-032-8112 Marketplace Restrictions Approved Sources Datasheet Management
RQST NE Updated Every Day 5340-01-032-8112 RQST Updated Every Day 5340-01-032-8112 RQST NE Related Documents
-43 BT32063-43 BT 32063 ITEM 43 A ferrous or nonferrous wire having a solid cross section that is square
-43BT32063-43BT 32063 ITEM 43 A ferrous or nonferrous wire having a solid cross section that RQST NE
-51 BT 32063-51BT 32063 ITEM 51BT32063-51 A deformable material which prevents the passage of matter
-51991526988BT 32063-51BT 32063 ITEM 51BT32063-51 A deformable material which prevents the passage of
-50 BT32063-50 BT 32063 ITEM 50 A pipe fitting primarily designed for permanent installation during piping
-50 BT 32063-50BT32063-50BT 32063 ITEM 50 A pipe fitting primarily designed for permanent installation
-21 32-32063-13 An access cover which is an integral part of the airframe structure of an aircraft.
KE AMC 3 AMSC L IMC Z IMCACTY GH Approved Sources 1560-00-788-4320 Part NumberManufacturerStatus32-32063
Restrictions 5340-01-032-8112
5340-01-032-8112 is a Plain Solid Disk that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. This item does not contain a precious metal.
Import and Export 5340-01-032-8112
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5340-01-032-8112
- US Air Force (FXGI)
- Effective Date:
- 1 Sep 2005
- United States of America (ZZ)
Approved Sources 5340-01-032-8112
- Part Number
- Manufacturer
- Status
- 32063
- Manufacturer
- 99643 - Eaton Aerospace Llc (Active)
- Primary Buy
- Primary Buy
Datasheet 5340-01-032-8112
- Characteristic
- Specifications
- FIIG
- Specifications
- A539R0
- Diameter [ABMZ]
- 0.207 Inches Minimum And 0.213 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-S-764 Fed Spec Single Material Response
- Material [MATT]
- Steel Comp 416
- Surface Treatment [SFTT]
- Passivate
- Thickness [ABNM]
- 0.070 Inches Minimum And 0.080 Inches Maximum
Weapon Systems (WSDC) 5340-01-032-8112
DLA Procurement Analysis 5340-01-032-8112
- Last Stock Position:
- 12 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5340-01-032-8112
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- HS
- AIRCRAFT HYDRAULIC SYSTEMS AND COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5340-01-032-8112
Freight Information 5340-01-032-8112
5340-01-032-8112 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5340-01-032-8112 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 5340-01-032-8112 is rated as class 70 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5340-01-032-8112 is not classified as a special type of cargo when transported by water. 5340-01-032-8112 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5340-01-032-8112 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: