Premium Information is available for this item - Upgrade for $1 a day
5340-01-032-5917
Rod End Clevis
5340010325917 010325917 160D891504-11
A forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION. View more Rod End Clevis
November 2023
12
Marketplace 5340-01-032-5917
Request a Quotation from participating marketplace vendors
Related Documents 5340-01-032-5917 1+ Documents (More...)
/fsg-53/fsc-5340/us
FedMall Updated Every Day 5340-01-032-5917 RQST NE Updated Every Day 5340-01-032-5917 RQST Updated Every
Day 5340-01-032-5917 RQST NE Related Documents 5340-01-032-5917 1+ Documents ( More... ) https//www.nsnlookup.com
Restrictions 5340-01-032-5917
5340-01-032-5917 is a Rod End Clevis that is an aviation critical safety item or flight safety critical aircraft part. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item may be hazardous as it is in a Federal Supply Class for potentially hazardous items. A MSDS should be available from the supplier for the end user to evaluate any hazards. The precious metals content of this item is unknown.
End Users 5340-01-032-5917
- US Air Force (FUGI)
- Effective Date:
- 1 Aug 2006
- United States of America (ZZ)
Approved Sources 5340-01-032-5917
- Part Number
- Manufacturer
- Status
- 160D891504-11
- Manufacturer
- 98747 - Ogden Air Logistics Center (Active)
- Primary Buy
- Primary Buy
- 160D891504-11
- 2M490 - Nassau Tool Works, Inc (Active)
- Secondary Buy
- Secondary Buy
- 160D891504-11
- 54372 - Ridge Engineering, Llc. (Active)
- Secondary Buy
- Secondary Buy
- 160D891504-11
- 26512 - Northrop Grumman Systems Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 160D891504-11
- 61174 - Northrop Grumman Systems Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 160D891504-11
- 79RG9 - Northrop Grumman Systems Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5340-01-032-5917
- Characteristic
- Specifications
- FIIG
- Specifications
- A264A0
- Distance From Pivot Pinhole Center To Rod Connection End [AKYV]
- 4.310 Inches Nominal
- Fork Span Width [AJSD]
- 0.770 Inches Nominal
- Fork Arm Thickness [AKYW]
- 0.370 Nominal Inches
- Hole Diameter [AAUB]
- 0.501 Inches Nominal
- Material Document And Classification [MDCL]
- Mil-S-5000 Mil Spec Single Material Response Overall
- Nominal Thread Size [CQJX]
- 0.562 Inches Rod Connection
- Material [MATT]
- Steel Comp 4340 Overall
- Shank Length [AATR]
- 1.350 Inches Nominal
- Shank Shoulder Length [AKYZ]
- 0.350 Inches Nominal
- Overall Height [ABKW]
- 1.750 Inches Nominal
- Thread Class [AAJD]
- 3A Rod Connection
- Thread Direction [AAJF]
- Right-Hand Rod Connection
- Thread Series Designator [THSD]
- Unf Rod Connection
Weapon Systems (WSDC) 5340-01-032-5917
DLA Procurement Analysis 5340-01-032-5917
- Last Stock Position:
- 9 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5340-01-032-5917
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- FJ
- A-10 SPECIALIZED CLOSE SUPPORT AIRCRAFT
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5340-01-032-5917
Freight Information 5340-01-032-5917
5340-01-032-5917 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 094140. A Sub NMFC of X. It has a NMFC Description of CLEVISES IRON/STEEL. 5340-01-032-5917 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49240 which rates the freight between FCL and LCL. 5340-01-032-5917 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5340-01-032-5917 is not classified as a special type of cargo when transported by water. 5340-01-032-5917 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 5340-01-032-5917 1 Records
Contracting Technical Data File (CTDF) 5340-01-032-5917 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: